Automatic saws - Import export

Drive 7,5 kW, S 6, 400 V, 50 Hz, R.P.M. of sawblade infinitely adjustable (2.000 – 3.500 R.P.M.) Sawblade Ø 500mm, smaller blades on request Cutting range max. 215 x 120mm (height x width) Hydro pneumatic saw blade feed, Speed infinitely adjustable, linearly under the tabletop from rear to front Material fence on the table for the cutting angle Feed length limited via 4 end switch horizontal profile clamping device on the feed and discharge side Cycle spray mist device Pusher Profile feed from right to left with ball screw and servo motor Feed length from 10 to 2500 mm Feed speed max. 250 mm / sec. Repeatability +/- 0.1 mm iincl. horizontal pneumatic clamping device Reversing possible, max. Stroke length 7,300 mm Siemens S7-300 with touch screen 10“

High performance automatic circular saw for aluminum and non-ferrous metals Fully automatic operation Infinitely adjustable speed control of the saw blade engine Material and saw feeder movement through servo driven ball screw spindle 2 axis CNC control Siemens S7 with 7” touchscreen Cutting range: up to 205 mm height and up to 400 mm width Rest-piece length as short as 55 mm (depending on profile) Machine can use carbide (TCT) or PKD blades diameter 650 mm (smaller diameter upon request) Automatic kerf widening to reduce scratches Individually controllable clamping pressure Motorized material feed with servo driven ball screw Pneumatic material clamps individually adjustable Positioning of the vertical and horizontal clamps by hand-wheel Cut off lengths of up to 5000 mm are possible by reversing the material feed up to 5 times Floating material feed to reduce material abrasion Feeder length of 1000 mm Simple exchange of saw blade, accessible from the front Saw blade feed is...

Fully automatic operation Motor 7,5 KW, S6, 400V / 50 Hz, 2850 R.P.M. For the use of saw blade Ø 550 mm Big cutting range Max cutting height up to 150 mm Max cutting width up to 270 mm 90° cuts Remaining piece from 75 mm Table separation before sawblade retracts powered ball screw spindle material feeder up to 600mm Feed length up to 600mm, Multiple movement of the feeder possible up to 9,9 m

Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication of cycle time Multiple feed device – max feed 3.250mm Table separation before the saw blade retracts so the profile is not touched by the saw blade Electronic material feeder, ball screw spindle and servo motor incl. pneumatic horizontal and vertical clamps Float mounting feeder to balance bend profiles Waste piece from 85mm Reducer of clamping pressure horizontal and vertical Cycle spray mist device with level indicator and automatic stop Cut-off length from 3mm Automatic cut-out when bar is finished Technical Data: Motor up to 18,5kW, S 6 40%, 400 V, 50 Hz, 2850 R.P.M. r.p.m. infinitely adjustable Saw blade speed 3.500 – 5.800 R.P.M Saw blade Ø 400mm Profile width max 200mm height max 120mm

High-Performance automatic circular saw for aluminium and non-ferrous heavy metal Fully automatic operation Use of TCT or solid carbide blades ø 250 mm Motor 7,5KW, 400 V, 50 Hz, infinitely adjustable Blade feeder hydropneumatic Material feeder with ball screw spindle and servo motor 2-axis NC control Simatic S7-300 with 7“ touch screen Cutting range: height up to 60 mm, width up to 140 mm Manual safety cover 2x Ø 100 mm swarf extraction connector Blade feeder pneumatic hydraulic controled vertical top to down Manual blade feed adjustment to optimize the feed length Pneumatic clamps horizontal left and right of the blade Diagnosis of errors, trouble shooting Pneumatic clamps vertical left of the blade Mist spray blade lubrication (filling level controlled) 1 l tank Parts slide (Option: conveying belt) Material feeder from 2 – 650 mm with ball screw spindle and servo motor Multiple material feed possible up to 3250 mm cutting length Vertical and horizontal clamps Reducer of...

0 – 300 mm adjustable pneumatic material feed and digital display Vertical hydraulic punching unit to the right of the saw blade Power 200 KN Punching tools according to profile shape Aluminium profile – finished Cut to length Vertical punching Up to 8 profiles in one operation cycle Cycle time from 13 s / 1,63 s each piece Layout of punching tools for multiple profiles Quick change punching tools according to the profile shape Pneumatic material feed 8 profiles at once Special shaped quick change support Clamps according to profile shape – changeable Hydraulic punching unit Power 200 KN, stroke 20 mm Cycle spray mist device for each die and for the saw blade

LATERALLY MOVABLE UNDERTABLE CROSS-CUT SAW / RIP CUT SAW FULLY AUTOMATIC CIRCULAR SAW FOR POSITIONING AND CONTROLLING VIA TOUCHSCREEN WITH LENGTH MEASURING SYSTEM EXENSO COMFORT (PUSHER SYSTEM) Application : Length stop system (pusher operation), revolving table with lateral movement and sawblade inclination via servo - motor for positioning (rip cut, cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Equipment / scope of supply : - Motor rating 12 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - lateral movement of machine table 400 mm with pneumatic brake system - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Cutting height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT - sawblade 650 x 30 x T 54

An efficiently sharpened saw blade is essential for productive and safe work processes. Tyrolit offers an extensive range of grinding tools for various saw blades, including chain saws, circular saws, band saws, and gang saws. Our abrasives are precisely matched to different grinding machines and tooth pitches for optimal sharpening results, featuring vitrified-bonded grinding wheels and resin-bonded diamond and CBN wheels for special applications. Tyrolit’s decades of experience are evident in our tools' grit qualities and innovative bond systems, ensuring optimal cutting edge quality. Our grinding tools for automatic chain saw sharpening machines promise extended service life and perfect tooth base radius matching. We also offer resin-bonded diamond wheels for special applications and CBN tools for grinding HSS and high-alloyed steels.

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

1. More stable and welcome mature CNC corner cleaning machine for pvc window processing. 2. Totally 5 cutters (two pieces of vertical milling cutters, two pieces of pulling blades, one piece of saw blade) will automatically clean the surface, vertical groove and inside of the rubber gasket. No tool change required. 3. Complete machinery controlled by advanced IPC works automatically precisely. 4. The cutters are controlled by spindle motor, much more stable, they are on CNC axis, very easy to adjust. 5. Two axes moved by ball screw shaft. 6. Within 25 seconds, complete one corner complete cleaning. 7. It can be connected with horizontal welding machine to become welding and corner cleaning production line for great imagination and high efficiency. 8. Friendly operation. Fast learning. 9. Optional: a piece of horizontal milling cutter, used for sliding windows.

SCHMIDT Zerspanungstechnik's contract manufacturing department has a well-provisioned materials warehouse and the latest automatic band saws SCHMIDT Zerspanungstechnik's contract manufacturing division is a competent partner when it comes to cutting by saw too. We stock standard materials in the most common dimensions in our materials warehouse for you. This means that we can respond to requests extremely quickly. We have two ultramodern automatic band saws that can precisely cut to size materials with a diameter of up to 450 mm. The machines are capable of cutting mitres and stack cutting too.

- Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000.

- Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000.

- Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000.

- Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000.

- Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000.

"- Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000."

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T; - sheet rolling up to 4 mm, width 1500 mm; - CNC milling with 3-axle by vertical machining centres of up to 2000x500x600 mm; - CNC milling with a 4-axle vertical machining centre of up to 2000x540x440 mm; - CNC turning, rod up to D65 mm; - CNC turning by vertical machine up to D250, L160; - Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000; - Flat grinding: 200x500mm.

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T; - Sheet rolling up to 4 mm, width 1500 mm; - CNC milling with 3-axle by vertical machining centres of up to 2000x500x600 mm; - CNC milling with a 4-axle vertical machining centre of up to 2000x540x440 mm; - CNC turning, rod up to D65 mm; - CNC turning by vertical machine up to D250, L160; - Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000; - Flat grinding: 200x500mm.

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T; - Sheet rolling up to 4 mm, width 1500 mm; - CNC milling with 3-axle by vertical machining centres of up to 2000x500x600 mm; - CNC milling with a 4-axle vertical machining centre of up to 2000x540x440 mm; - CNC turning, rod up to D65 mm; - CNC turning by vertical machine up to D250, L160; - Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000; - Flat grinding: 200x500mm; - External thread rolling: M8, M10, M12, W16.

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T; - Sheet rolling up to 4 mm, width 1500 mm; - CNC milling with 3-axle by vertical machining centres of up to 2000x500x600 mm; - CNC milling with a 4-axle vertical machining centre of up to 2000x540x440 mm; - CNC turning, rod up to D65 mm; - CNC turning by vertical machine up to D250, L160; - Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000; - Flat grinding: 200x500mm.

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T; - Sheet rolling up to 4 mm, width 1500 mm; - CNC milling with 3-axle by vertical machining centres of up to 2000x500x600 mm; - CNC milling with a 4-axle vertical machining centre of up to 2000x540x440 mm; - CNC turning, rod up to D65 mm; - CNC turning by vertical machine up to D250, L160; - Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000.

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T; - Sheet rolling up to 4 mm, width 1500 mm; - CNC milling with 3-axle by vertical machining centres of up to 2000x500x600 mm; - CNC milling with a 4-axle vertical machining centre of up to 2000x540x440 mm; - CNC turning, rod up to D65 mm; - CNC turning by vertical machine up to D250, L160; - Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000; - Flat grinding: 200x500mm; - External thread rolling: M8, M10, M12, W16; - Welding MIG, TIG, contact.

- CNC punching: sheet up to 4mm 1250x3000 mm; - CNC bending up to 3000 mm 100T; - sheet rolling up to 4 mm, width 1500 mm; - CNC milling with 3-axle by vertical machining centres of up to 2000x500x600 mm; - CNC milling with a 4-axle vertical machining centre of up to 2000x540x440 mm; - CNC turning, rod up to D65 mm; - CNC turning by vertical machine up to D250, L160; - Band saw cutting by automatic machines up to 400x400 mm, L12000 mm; - Sheet cutting by plasma by CNC machine up to 50x3000x10000; - Flat grinding: 200x500mm; - External thread rolling: M8, M10, M12, W16.

Semiautomatic seam saw for the automatic cutting of any type of can. Features include electropneumatic operation of blades with adjustable advancement, total retraction of blades if the protective cover is opened, modular fittings for can blocking, CEstandard protection and high soundproofing. Mono or triphase motors available.

Numerical Controlled Automatic Band Saw

The high-performance automatic circular saws of the HCS-E series are specialists for highest cutting performance and premium quality, which quickly pay for themselves in multi-shift operation. The basis of the extreme performance is the unique, extremely stable and solid construction with perfectly matched components and state-of-the-art drive technology. The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. And what is remarkable: This system concept covers a large range of all industrial requirements, providing the highest quality at an unbeatable priceperformance ratio.

The automatic plate saw VPS60-160A is BEHRINGER's solution when it comes to fully automatic cross-cutting of large plates and blocks. The vertical arrangement of the saw band has clear advantages over the horizontal design, as the engagement length of the saw band is significantly shorter. As a result, the cross cutting plate saw offers significantly higher cutting capacities while at the same time reducing tool costs. Thanks to their robust basic design and high-performance components, the automatic plate saws of the VPS series are designed for demanding applications in the steel trade, industry and metal production. From non-ferrous metals and aluminum to simple work steels and difficult-to-cut materials such as Inconel or titanium. Their modular design allows the cross cutting plate saw to be individually adapted to the customer's application.

The HCS MULTI-FLUID is a series of carbide circular saw manufactured by Eisele. The key highlights of the HCS MULTI-FLUID series include a firm base frame that is welded, a bigger scope of cutting, an arbitrary saw blade that is accessible to ensure maximum cutting scope that can reach up to 180 mm . The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. The Multi-Fluid system is excellent for high-alloy stainless steels and tool steels, nickelbasedalloys like Inconel and Hastelloy as well as titanium alloys. Depending on the requirements, the following cooling/lubrication components can be combined in a most effective way: — Coolant nozzles for wet processing — Micro-spraying device for minimum quantity lubrication — Cooling vortex tube for dry cutting