Aromatic solvents - Import export

Suction and discharge of nearly all corrosive chemical products: strong acids, solvents with high aromatic content, chlorinated or oxygenated solvents, aromatic hydrocarbons, etc. Electric properties: UPE pipe and conductive rubber coatings, R ≤ 1 MOhm/lg.

The polyurethane-elastomer Blickle Softhane® is one of the four polyurethane treads developed by Blickle. The positive characteristics of the tread are the end result of many years of optimisation. The extra-thick elastic tread guarantees excellent operational comfort. It is especially gentle on the floor, abrasion-resistant and quiet. The green colour does not leave any tracks and is also non-staining. Softhane® is resistant to a wide range of aggressive substances, with the exception of aromatic solvents, hot water or steam.

Dissolving of a wide range of sealants and adhesives such as polyurethane residues, materials containing epoxies Elimination of oily and greasy soiling Removal of bitumen and tar splashes Dissolving of labels and adhesive strips Removal of paints on a PMMA and PU resin basis from metal surfaces Advantages and benefits Good infiltration of adhesive films allows easy removal of the residues from the surface Good washable with water after use Applicable to surfaces of metal, stainless steel, glass, wood, ceramics. Do not apply on sensitive materials such as PVC, PS or on painted surfaces Low effect on the climate and no negative influence on the ozone layer (ozone-depleting potential: ODP = 0) Free of surfactants, halogenated and aromatic solvents

DIETHYLENE GLYCOL (DEG) ENERJISUN DEG Purity 99.8 % wt. min Color [Pt-co ] 5 max MEG 0.05 % wt. max TEG 0.05 % wt. max Water 0.05 % wt. max Acidity as Acetic Acid Max 50 ppm Ash Content Max 50 ppm Specific gravity (20/20 ◦C) 1.1175-1.1195 Color Pt-co 10 max Distillation@760 mmHg IBP 242 ◦C min DP 250 ◦C max Introduction Diethylene glycol (DEG) is an odorless, colorless, clear and viscose liquid with a sweet taste, which is produced from the reaction between water and ethylene oxide. In fact, it is the coproduct of ethylene glycol alongside with triethylene glycol (TEG). General Applications Diethylene glycol is used in the manufacture of unsaturated polyester resins, plasticizers and polyurethanes. It is also used as textile lubricant, solvent in textile dyeing and printing, humectant, selective solvent for aromatics in petroleum refining, plasticizer for paper, cork and synthetic sponges, raw material for the production of ester

Liquid asphalt is bitumen dissolved in an aromatic hydrocarbon, petroleum or another solvent. The standard process involves heating the bitumen to reduce its viscosity and then mixing it with an appropriate hydrocarbon fraction. The resulting bituminous solution is used as: •a primer material, •a bitumen thinner, •a material to serve as a priming layer for aggregate before applying subsequent asphalt layers. Depending on the end user’s requirements, an appropriate solvent is used.

Nowadays, water isolation membranes are preferred in terms of both cost and ease usage among the methods used to prevent positive incoming water from passing into concrete structures. In non-insulated areas, water enters the structure overtime and cause deformation of the metal structures. This causes shortening of the life of the structure. In this sector, Purin offers aromatic, aliphatic, bitumen based and water-based insulation products with different properties. Aromatic structured products are cured with moisture to form a highly mechanical and highly elastic film. On the other hand, our water-based products which can be applied to moist surface, have high chemical resistance, elastic and aliphatic structure and are not affected by UV rays. PURINAQUA RM 703 - Aliphatic - Waterborne - 1C - Ready to use, high elasticity, UV resistant PURINAQUA SM 701 - Aliphatic - Waterborne - 1C - Ready to use, UV resistant PURINATE BM 201 - Aromatic - Solvent - 2C - Fast curving PU-Bitumen based