Aromatic solvents - Import export

Suction and discharge of nearly all corrosive chemical products: strong acids, solvents with high aromatic content, chlorinated or oxygenated solvents, aromatic hydrocarbons, etc. Electric properties: UPE pipe and conductive rubber coatings, R ≤ 1 MOhm/lg.

The polyurethane-elastomer Blickle Softhane® is one of the four polyurethane treads developed by Blickle. The positive characteristics of the tread are the end result of many years of optimisation. The extra-thick elastic tread guarantees excellent operational comfort. It is especially gentle on the floor, abrasion-resistant and quiet. The green colour does not leave any tracks and is also non-staining. Softhane® is resistant to a wide range of aggressive substances, with the exception of aromatic solvents, hot water or steam.

Dissolving of a wide range of sealants and adhesives such as polyurethane residues, materials containing epoxies Elimination of oily and greasy soiling Removal of bitumen and tar splashes Dissolving of labels and adhesive strips Removal of paints on a PMMA and PU resin basis from metal surfaces Advantages and benefits Good infiltration of adhesive films allows easy removal of the residues from the surface Good washable with water after use Applicable to surfaces of metal, stainless steel, glass, wood, ceramics. Do not apply on sensitive materials such as PVC, PS or on painted surfaces Low effect on the climate and no negative influence on the ozone layer (ozone-depleting potential: ODP = 0) Free of surfactants, halogenated and aromatic solvents

Solvent resistance: Color-changing dye used in thermochromic capsules is sensitive to aliphatic solvent with a few carbons and resistant to aliphatic or aromatic solvent with a lot of carbons. Thermal resistance: If high temperature needs to be applied, less than 10 minutes at 230℃ is recommended. A prolonged operation at high temperature higher than 75℃ must be avoided because thermochromic organic matters may be resolved at higher than 80℃. Light resistance: Thermochromic products have the grade 1 light fastness, so extended exposure to sun may considerably reduce its color-changing effect.

DIETHYLENE GLYCOL (DEG) ENERJISUN DEG Purity 99.8 % wt. min Color [Pt-co ] 5 max MEG 0.05 % wt. max TEG 0.05 % wt. max Water 0.05 % wt. max Acidity as Acetic Acid Max 50 ppm Ash Content Max 50 ppm Specific gravity (20/20 ◦C) 1.1175-1.1195 Color Pt-co 10 max Distillation@760 mmHg IBP 242 ◦C min DP 250 ◦C max Introduction Diethylene glycol (DEG) is an odorless, colorless, clear and viscose liquid with a sweet taste, which is produced from the reaction between water and ethylene oxide. In fact, it is the coproduct of ethylene glycol alongside with triethylene glycol (TEG). General Applications Diethylene glycol is used in the manufacture of unsaturated polyester resins, plasticizers and polyurethanes. It is also used as textile lubricant, solvent in textile dyeing and printing, humectant, selective solvent for aromatics in petroleum refining, plasticizer for paper, cork and synthetic sponges, raw material for the production of ester

#rpo is a fully rich aromatic by-product from the solvent extracting process to modify the physical properties of the vulcanization and reduce the cost of the finished product. As a component in rubber formulations and manufacturing of products such as automobile tires, rubber shock absorbers, footwear, industrial hoses, #wire, and #cable coverings, flooring materials, and carrier fluid or solvent in the manufacture of #adhesives, #sealants, #polishes, and carbon black. We can propose a suitable offer based on your needs. Please feel free to contact me if you need any further information. Mobile: +905318337385 Email: y.nazari@tedoraco.com Website: www.tedoraco.com

Nowadays, water isolation membranes are preferred in terms of both cost and ease usage among the methods used to prevent positive incoming water from passing into concrete structures. In non-insulated areas, water enters the structure overtime and cause deformation of the metal structures. This causes shortening of the life of the structure. In this sector, Purin offers aromatic, aliphatic, bitumen based and water-based insulation products with different properties. Aromatic structured products are cured with moisture to form a highly mechanical and highly elastic film. On the other hand, our water-based products which can be applied to moist surface, have high chemical resistance, elastic and aliphatic structure and are not affected by UV rays. PURINAQUA RM 703 - Aliphatic - Waterborne - 1C - Ready to use, high elasticity, UV resistant PURINAQUA SM 701 - Aliphatic - Waterborne - 1C - Ready to use, UV resistant PURINATE BM 201 - Aromatic - Solvent - 2C - Fast curving PU-Bitumen based