Air connections - Import export

8.8 & 10.9 quality very durable decromat 500 armored bolts were used to connect the sheets and increase the durability of the silos. Special insulation has been applied to the silo sheets and ceiling cone head connections to ensure air and water tightness.

Stop valves for shutting off and locking in the event of an unintentional drop in pressure. Pneumatically unlockable, for direct installation in the cylinder air connection.

Accessory Profile KP09P: Pneumatic clamping plate for shaft clamping Selectable sizes of the compressed-air connection Easy mounting and retrofitting

Accessory Profile KP09: KP09 for shaft diameters 8–20 mm Selectable sizes of the compressed-air connection Easy mounting and retrofitting

Pneumatic cylinders according to the norm, standard or special design, completely configured ready for installation and pre-assembled with add-on parts, bearing elements, compressed air connections, position sensors or control valves according to customer specifications.

Solenoid valves for direct mounting on the pneumatic actuator or cylinder. Cylinder and valve become a compact unit thanks to simple installation in the air connection. Available in sizes 1/8 and 1/4 and with all common solenoid voltages. With manual override.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

Elbows and connections made of steel and stainless steel for oil, gasoline and air hose lines. The connections are pressed onto the assembled hose.

The generation of compressed air is always connected with the formation of condensate. In most cases, this condensate contains oil, is contaminated with dirt particles and spreads out in the entire compressed-air system. A system problem which can result in damage and additional costs. The BEKOMAT drains condensate in the compressed-air system in an electronically level-controlled manner. More than 3,000,000 installations worldwide make it the industrial standard for reliable and cost-effective condensate drainage.

The UNI lock mounting clamps can be installed in any position on machine tables, fixtures or workholding equipment (tooling plates, cubes, tombstones etc). The modular design enables the number of clamps and distance between them to be ideally adjusted to suit the clamping task. The clamps can be supplied with or without rotation lock. The high clamping forces are generated by the integrated spring package (the unit clamps when depressurised). Compressed air is applied to release the clamp. The following holding forces are possible with the UNI lock clamping bolt in conjunction with M10, M12 or M16 fastening screws: Holding force (M10) 35,000N Holding force (M12) 50,000N Holding force (M16) 75,000N Supplied with: 1x clamping module incl. 6 fastening screws. 6x screw protection caps. 2x air connection O-rings. 1x installation O-ring.

Quick exhaust valves made of nickel-plated brass. For quick bleeding of cylinders and systems. On request also fully assembled with hose connections and exhaust air silencer. Available in sizes M5 – 1/2

he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

MS80 - MANUAL GLUE GUN WITH GRANULAR HOT MELTS The MS 80 glue gun works with granular hot melts without compressed air. Simply connect them to the socket – ready. Use the thermostatic controls to set the requested temperature between 20°C and 200°C and you always work with the optimum glue temperature. Pull the trigger to apply the melted granulate. The MS 80 has proven successful in practice over a long period of time.

Correct ventilation is not only an important prerequisite for a pleasant working environment, work protection provisions and regulatory directives make it mandatory in many areas.Proper room ventilation conducts harmful fumes and substances out of the room. The high pressure centrifugal fan TFV 100 is well-equipped for tasks such as transport of up to 4,000 m³/h air, even over longer distances and with back pressure.Owing to its extreme robustness, it is able to handle harsh working environments efficiently.The TFV 100 is available as standard model and additionally as a hire model. Benefits in practice: Extremely robust models with a high flow rate Splash proof type A (IP55) Deployment also possible in very dusty rooms Fan motor situated away from the main air flow Can be connected to suction as well as distribution ducts Stable characteristic curves and constantly high pressure

Our fully automated winding centres for fine and self-bonding wire make us the perfect partner for any tasks you require. Our coils are tinned with lead-free coatings (RoHS). To manufacture self-supporting coils, we use self-bonding wire. During winding, the surface of the wire is bonded using hot air. To ensure the coil connections can be soldered, they are then stripped of insulating enamel using a fully automated milling process. PRUFREX is able to make air core coils with wire thicknesses from 0.045 to 1.6 millimetres.

Housing hardened and black oxidised. Contact faces ground. Note: This positioning and clamping system is especially suitable for installation in fixtures (plates, clamping tower blocks, etc.) in all mounting positions. The modular design allows the number of and distance between the locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically released through control of the locating cylinder with the "opening" connection. The 3 clamping balls move inward and the fixture can be changed quickly. For clamping, the air is taken from the "opening" connection and the "clamping" connection then receives air on the locating cylinder. The 3 clamping balls are mechanically driven outward again and the new fixture is clamped. To achieve optimal retaining force, the locating cylinder remains connected to the air.

TTK 24 E Dehumidifier The dehumidifier TTK 24 E convinces with its dehumidification performance of up to 10 litres a day and is well suited for keeping dry small, heated rooms, for example hobby rooms. Special features: Automatic dehumidification performance Excellent design Very easy handling Overflow protection with automatic power off Washable air filter Connection for extern condensate drain Technical details: Dehumidification performance max.: 10 litres/24h Air flow rate: 100 m³/h Suitable for rooms up to: 15 m² / 37 m³ Operating range temperature: 5 - 32 °C Operating range humidity: 30 to 90 % r.F. Input voltage: 230 V / 50 Hz Power input: 0.25 kW Water tank: 1.6 litres Sound level dB (A): 42 Dimensions (l x w x h): 298 x 354 x 493 mm Weight: 10.1 kg

Working range Blind rivets above 6,4 mm Ø all materials and lockbolts up to10 mm Ø with corresponding pulling heads Technical data Weight: 3.4 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 6.9 ltr. per rivet Traction power: 50.000 N at 7 bar Stroke: 15 mm Equipment 1 hydraulic oil bottle 100 ml 1 oil refi ll can Operating instructions with spare parts list

Working range 4.8 lock bolts MagnaGrip®* and C6L®* Technical data Weight: 2.0 kg Operating air pressure: 5 - 7 bar Air hose connection Ø: 6 mm Air consumption: 4.8 NL / stroke Traction power: 18,000 N at 5 bar Stroke: 25 mm Accessories Maintenance wrench SW12/14, SW14/17 1 hydraulic oil bottle 100 ml 1 oil refill can Operating instructions with spare parts list

Working range Blind rivets above 6,4 mm Ø all materials and lockbolts up to10 mm Ø with corresponding pulling heads Technical data Weight: 3.4 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 6.9 ltr. per rivet Traction power: 42.000 N at 7 bar Stroke: 17 mm Equipment 1 hydraulic oil bottle 100 ml 1 oil refi ll can Operating instructions with spare parts list

Working range Sets speed rivets up to Ø 4.8 mm aluminium and Ø 4.0 mm steel. Suitable for speed rivets with a mandrel length between 483 mm and 510 mm. Further lengths available on request. Technical data Traction power: 3,500 N Stroke: 26 mm Operating pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4“) Weight: 1.8 kg Equipment Spreader nosepiece in working position Tag on device head Rubber foot Advantages • Quick setting process, fast rates • Safe working through disposable mandrel and optional automatic switchoff • Ergonomic handling for fatigue-free work • Light and compact design • Modular construction based on the TAURUS® design • Softgrip • Tool-free conversion

Working range Sets blind rivets up to 6.4 mm Ø all materials and up to 8 mm Ø alu (max. mandrel dia. 4.5 mm) Technical data Weight: 2.0 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 4.8 ltr. per rivet Traction power: 23.000 N at 6 bar Stroke: 19 mm Equipment Nosepieces:17/36, 17/40 and 17/45, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml, 1 oil refi ll can, Operating instructions with spare parts list

Working range 6.4 lock bolts MagnaGrip®* and C6L®* Technical data Weight: 2.6 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4“) Air consumption: approx. 4.8 NL per rivet Setting force: 23,000 N at 6 bar Stroke: 19 mm Accessoires Angle head with nosepiece in working position Tag on device head 1 hydraulic oil bottle 100 ml 1 oil refill can Operating instructions with spare parts list Advantages • Hydro-pneumatic lock bolt setting device • Accessibility in tight working spaces • Light and compact design • Modular structure • Ergonomic handling

Working range Sets blind rivets up to 5 mm Ø all materials and up to 6 mm Ø alu/steel (max. mandrel dia. 3.2 mm) Technical data Weight: 1.6 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2,3 ltr. per rivet Traction power: 11.000 N at 6 bar Stroke: 18 mm Equipment Nosepieces:17/27, 17/29, 17/32 and 17/36, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml,1 oil refi ll can, operating instructions with spare parts list

Working range Blind rivet nuts from M3 up to M10 all materials as well as M12 in aluminium and steel Technical data Weight: 2.4 kg Adjustable stroke,max: 10mm Adjustable traction force, max: 18,5 kN at 5 bar Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2 to 4 ltr. per rivet nut (depending on nut size) Scope of delivery 2 double open ended wrenches SW 24/27 1 hexagon screw driver SW 4 1 oil refi ll can with hydraulic oil 100 ml 1 oil refi ll can Operating instructions with spare parts list

Working range Blind rivets from M3 up to M6 of all materials, except M6 stainless steel Technical data Weight: 1.96 kg Maximum stroke: approx. 7,5 mm Adjustable traction force: up to approx. 10,5 kN at 5 bar Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 1 - 2 ltr. per setting process (depending on nutsize) Scope of delivery 2 double open ended wrenches SW 24/27 1 hexagon screw driver SW 4 1 oil refi ll bottle with hydraulic oil 100 ml 1 oil refi ll can operating instructions with spare parts list Rubber foot Quick setting guide

Working range Sets blind rivets up to 6.4 mm Ø all materials (max. mandrel dia. 4.5 mm) Technical data Weight: 1.9 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 4.8 ltr. per rivet Traction power: 18.000 N at 6 bar Stroke: 25 mm Equipment Nosepieces:17/36, 17/40 and 17/45, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml, 1 oil refi ll can, Operating instructions with spare parts list