Air conditioners for building - Import export

Preservatech’s Maxi One constant volume humidity generator is a fully automatic positive pressure air supply device, designed to provide conservation-quality humidity control for museum display or storage enclosures. A single microclimate unit in a remote location (such as a machine room) can reliably maintain extremely stable humidity control and pollution abatement for an entire gallery of showcases. SUGGESTED APPLICATION: Use these units to supply air to multiple display cases, very large volume showcases, multiple storage enclosures or small archive rooms where: Energy cost savings of up to 50% are to be realized. Accurate humidity control in new or renovated galleries may be expensive or impractical. Existing air conditioning systems or building envelopes cannot maintain adequate humidity control.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Our B+B cable probes are a favourable alternative to measure temperature in liquid and gaseous media. Ideally suited for application in heating and air-conditioning technology as well as in building automation.

Prefabricated building has wide-range using areas to solve negative ways of tranditional installation process. Especially most common usage is office solutions.Prefabricated office buildings are best way to create working areas for businesses. Special design help to provide comfortable and effective solutions. The prefab office buildings can customize with kitchen area and sanitary facilities according to needs. Office building is the fast and economical way for long term or temporary project compared to traditonal structure. The buildings meet all electrical requirements for devices and also air conditioner units. These advantages make prefab buildings more useful and preferable. Our company, the largest prefabricated building supplier in Turkey, offers prefabricated solutions that will meet and exceed the requirements of quality, price, delivery time and assembly. Our buildings are custom-made and meet the quality standards and climatic conditions of each country.

Used in large, tow pressure centrifugal chillers. This type cf chiller provides a very large amount of chilled water for air conditioning purposes (office Buildings, hotels, etc.) at the lowest operating cost compared to any other type of air conditioning system.USA RefrigerantAll of our refrigerants meet the ARI 700 requirements as set forth by the EPA A copy of the lab report will be included in your order if requested

Used in large, tow pressure centrifugal chillers. This type cf chiller provides a very large amount of chilled water for air conditioning purposes (office Buildings, hotels, etc.) at the lowest operating cost compared to any other type of air conditioning system.USA RefrigerantAll of our refrigerants meet the ARI 700 requirements as set forth by the EPA A copy of the lab report will be included in your order if requested

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • The twist mechanism allows eight different profiles to be activated. • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Very slim, light-weight construction for shirt or coat pocket, with clip • For almost all common closures • Key profile for these applications: heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. doors & windows in new buildings, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows three different profiles to be activated. • With ultra-bright LED torch in the clip • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• For almost all common closures • Key profile for these applications: heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. doors & windows in new buildings, locking systems, technical installations, for venting heating systems and many more • Universal key for almost all common switch cabinets & closures • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)

• Particularly easy-to-handle version • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Plastic adapter with 1/4" bit-holder and retaining chain, approx. 20 cm • Bit (1/4") made from high-quality tool steel and specially hardened • Made of zinc casting (GD-Zn)

• For almost all common closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, public services e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • With strong chain and snap hook • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows eight different profiles to be activated. • Made of zinc casting (GD-Zn)

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)

• Very slim, light-weight construction for shirt or coat pocket, with clip • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With ultra-bright LED torch in the clip • The twist mechanism allows four different profiles to be activated. • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

High flow industrial roof extractor for the extraction of stale air HELIX BOX MANN industrial roof extractors have an extraction capacity from 21,000 m3/ h to 39,800 m3 / h and are the perfect solution for the extraction of stale air in industrial buildings, warehouses, farms, greenhouses, etc. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - External structure made of galvanized steel. - Overpressure shutter made of galvanized steel. - Propellers made of AISI 430 BA stainless steel. - High quality bearings. - IP-55 three-phase electric motor - V-belts. - Transmission pulleys made of magnesium aluminum. - Engine support with tensioner. - Roof supports. - Air inlet with protection grid. - Anti rain visor.

Use as standard Dektite®, or when retrofit is required, cut and fit around pipe and join with clips (supplied) Ideal for HVAC installations where you may need to retrofit the flashing (ie cut to fit over the pipe and reseal) This product is 2 in 1, the Swiss Army Knife of HVAC flashings - Available to cover sizes up to 760mm pipe diameter. Available in Black & Grey EPDM and Red High Temperature Silicone.

Cost efficient infrared emitter for NDIR gas analysis and other infrared measurement applications. With only 250 mW required input power, the emitter is also suitable for mobile - and handheld devices. The membrane of this cmOS based ire source achieves membrane temperatures up to 800 °C with long term stable radiation power and short time constant. For high volume applications such as building air conditioning, automation and others, the JSIR 340 is suitable due to its excellent price/performance ratio. The packaging with reflector is good for measurement distances from 2 cm. The MEMS emitter chip consists of a multilayer hotplate membrane containing a high temperature stable metal C-MOSI layer. The emitter chip is based on a silicon substrate with a back-etched membrane. All thin film processes are performed with standard MEMS processes and cmOS compatible materials. The active C-MOSI resistor layer is protected against aging and environment.

These low capacitance double screened cables are mostly used in frequency-controlled motor supplies where electromagnetic interference occurs. They are also used in air conditioning systems, power plants, automotive industry, buildings, industrial pumps, heavy industry. They can be used in dry, moist, acidic and oily places with medium mechanical stress. In the event of a fire, thanks to their HFFR compound, they do not catch fire easily and the fire goes off itself. These cables have low smoke density and they do not produce poisonous and corrosive gases during fire.

Material: Galvanized, Stainless and Aluminum Diameter: 0.50-1.20mm l:3000/6000mm Insulation: Rubber sheet (inside/outside) Coating: In desired paint codes Production: In automatic machines Joining : Flanged 30/40/50 mm

IRA Air Cooled Type Rooftop units are designed to operate in harsh environmental outdoor conditions by its versatile, efficient and robust characteristics. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.

ISW Water Cooled Type Split units are designed for the areas where there is no infrastructure for cooling solution. Split units consist of two parts as being indoor and outdoor, so these two parts are not affected from environmental conditions of each other’s. Thus the solution is optimized by necessary updates against to harsh environmental conditions such as dust, humidity, corrosive and high ambient temperatures.

ISA Air Cooled Split Type units are designed for the areas where there is no infrastructure for cooling solution. ISA brings the full independency for the operation, doesn’t need for the resources of your premises except the electricity. Split units consist of two parts as being indoor and outdoor, so these two parts are not affected from environmental conditions of each other’s. Thus, the solution is optimized by necessary updates against too harsh environmental conditions such as dust, humidity, corrosive and high ambient temperatures.

ISCA Air Cooled Type Self Contained units with their compact, durable, robust and attractive cabinet fit any working environment such as dusty and corrosive. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.

PO Heavy Duty Outdoor Type Panel Coolers are designed to operate in severe ambient conditions. TMS provides solutions for an abundance of applications. PKS PO units operate with inherent long term stability and accuracy, as our products are designed and produced to fit the highest quality requirements in the harshest environments.

All of our ATEX products are subjected to a certification process according to the serial numbers and classifications specified in the project phase. All tests are performed and certificate approvals are obtained by third party organizations. The following ATEX classification is communicated by customers in order to provide the most accurate product: II 2 G Ex de IIC T3 Gb II: Other explosive areas 2: Zone 1 and Zone 2 G: Gas Ex: European standard also; d: Flame-proof chassis, e: Increased safety IIC: Explosion Group T3: Surface temperature max 200 ° C

VI Series Inrow type Crane Cabin Coolers are bringing breath of fresh air to crane cabins. Process cranes in Steel, Non-Ferrous metals, Mining, Oil&Gas, Cement, Paper, Offshore industries have the most challenging environmental conditions. Extremely dusty and corrosive, very high and low ambient temperatures are enemies of crane cabin coolers and cause failures and stoppages sometimes. Perfect solution on keeping the A/C in protected environment! The whole A/C unit except condenser unit is kept inside on the cabin where is more safe than outside conditions. No worries, we still keep all the precautions for condenser unit too. There are still a lot of options for condenser unit such as Cu/Cu or SS coils as well as various coating options for coil and fans. The models are perfect match with the sizes of E-Panels in Electrical cabins. They are stackable next to each other or to be placed in spread delivering

VM Medium Type Units are designed for medium-duty industrial applications such as process cranes, operator cabins, shelters, containers in metallurgy, oil&gas, cement, energy, automotive, mining and port industries. The main features and advantages of this product are; plug & play compact design, less needs for erection services. The cooling, fan only, heating function modes are available while the filtering is always operating.

VS Split Type units are designed for heavy-duty operations in harsh environmental conditions such as process cranes in metallurgy, oil & gas, cement, mining and port industries. The main features and advantages of this product are; wide range of models are provided with variant indoor and outdoor units and ease of maintenance. The cooling, fan only, heating function modes are available while the filtering is always operating. VS Split series are providing the best option when the projects need the top flexibility.