Long-term lubricants - Import export

New concept! Maintenancefree track surface! Track surface doesn't require lubrication over long term use! IKO CLube Unit for Cam Followers is a lubrication part to mount into Cam Followers. Regular lubrication is not required as lubrication oil is supplied onto the outside diameter surface of the cam follower outer ring and track surface. Long term maintenance free track surface achieved.

Super long-time grease with a synthetic base oil for extended relubrication periods. - salt water resistant - extremely adhesive AUTOL TOP 2000 is a special grease with exceptional adhesive behavior and pronounced extreme pressure properties - a real super long-term grease for significantly extended relubrication periods. It reduces wear under extreme conditions and is particularly resistant to washing out of the lubrication points. It is extremely resistant to salt water, cooling lubricants, pesticides and many detergents. Due to its composition and when used as intended, in accordance with the system manufacturer's regulations, it is physiologically harmless and is therefore also ideal as a lubricating grease for use in the food industry

PL 200 is a long-term lubricant specifically developed for the industry. It contains premium, lasting, active ingredients and is suitable for use in temperatures from around -60ºC to 250ºC. PL 200 obstructs corrosion, oxidation, freezing, galling and wear. It is water-, salt water- and solvent vapour-resistant. It is adherent, wear-resistant and pressure-resistant. Water-repellent Protective against corrosion Non-toxic Loosens dirt Loosens rust Chemical-resistant Does not resinify Separates Withstands high pressure High penetrating properties CFC- and silicone-free Fields of application PL 200 is suitable for all common materials, e.g. metal, wood, rubber and almost all synthetics. It’s also suitable for almost all synthetic combinations in gear boxes, bearings, chains, screw connections, switches, channels, locks, etc. PL 200 can be used freely in the food sector. Usage Always shake well before use! Check plastic parts beforehand for compatibility, then just spray on, using...

In 2015 the product range name was changed. The old product range name was Castrol Optimol Paste MP range. White and anthracite-colored assembly pastes, resistant to water and aggressive media Description Castrol Molub-Alloy Paste MP (previous product name Castrol Optimol Paste MP series) are assembly pastes with solid lubricants. They are particularly suitable for long-term and lifetime lubrication, even under extreme mechanical and chemical stress. Application Castrol Molub-Alloy Paste MP is suitable for lubrication points that are exposed to aggressive environmental influences. It is used in systems and machines in the chemical and automotive industries. It comes from vehicle parts such as: B. door stops, which are exposed to extreme influences during production.

In 2015 the product range name was changed. The old product range name was Castrol Optimol Paste MP range. White and anthracite-colored assembly pastes, resistant to water and aggressive media Description Castrol Molub-Alloy Paste MP (previous product name Castrol Optimol Paste MP series) are assembly pastes with solid lubricants. They are particularly suitable for long-term and lifetime lubrication, even under extreme mechanical and chemical loads. Application Castrol Molub-Alloy Paste MP is suitable for lubrication points that are exposed to aggressive environmental influences. It is used in systems and machines in the chemical and automotive industries. It comes from vehicle parts such as: B. door stops, which are exposed to extreme influences during production.

Lubricating and sealing off tap cocks, labyrinth seals, stuffing boxes and packings Lubricating and sealing off fittings made of metal, plastic and ceramic, e.g. drain, cold- and hot-water fittings Long-term lubrication of heavily loaded press and guide plates, for example on telescope booms of mobile cranes As a lubricant for of threaded spindles on radiator thermostats Advantages and benefits Reduces wear Extension of the relubrication intervals High resistance to oxidation Noise and vibration-damping Resistant to cold and hot water, water vapour, lactic, formic, acetic and fruit acid, as well as alkaline and acidic cleaning agents and disinfectants Good elastomer and plastic compatibility For optimum adhesion, clean contamination and other lubricants from slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly with a brush, spatula, etc. The paste will also act as a sealant.

In 2015 the product name was changed. The old product name was Castrol Longtime Blanc. Molub-Alloy Blanc White multi-purpose grease for high bearing pressures and long-term lubrication Description Castrol Molub-Alloy Blanc (previous product name Castrol Longtime Blanc) is a white multi-purpose grease for use at high bearing pressures and for long-term lubrication. It is characterized by its special adhesive properties and its water-resistant, sealing behavior. Application Molub-Alloy Blanc is used in the food and beverage industry, especially in wet operations, in dusty environments and in conveyor lines, canning and bottle filling systems and labeling machines, where there is no contact between the lubricant and the food or beverage . Molub-Alloy Blanc can be used for long-term lubrication under high pressure loads, vibrations, shock loads, in highly loaded joints, plain and rolling bearings and pipe tracks.

Parting agent for casting, injection moulding, blow moulding and extrusion processes of plastics and elastomers Prevents sticking, for example of excess adhesive and sealant Eliminates creaking and squeaking noises when surfaces made of plastics, elastomers and metals rub on each other For easy fitting of plastic and rubber profiles, e.g. in door and window construction Lubricant for cutting edges of paper, cardboard, veneer or textile machines, etc. Advantages and benefits NSF H1 registered Highly effective due to outstanding surface wetting and formation of separating film with antistatic properties Broad range of uses for long-term lubrication, protection, care and impregnation of material surfaces made of metal, plastic and rubber Minimal consumption through formation of extremely thin films Resistant to water and weathering Long spray tube for precision application MOSH/MOAH-free

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication.

In 2015 the product range name was changed. The old product range name was Castrol Inertox range. Castrol Inertox Medium) Fully synthetic inert high-temperature lubricating greases Description The lubricating greases of the Castrol Braycote Inertox series (previous product name Castrol Inertox series) are chemically inert and thermally stable high-temperature greases based on high-quality, fully synthetic base oils and a thickener made of polytetrafluoroethylene. They are used for the long-term lubrication of roller and plain bearings that are subject to high thermal loads. Castrol Braycote Inertox high-temperature greases are used under aggressive environmental conditions and are resistant to inorganic and organic acids and alkalis, even in vacuum systems and clean rooms where a low evaporation rate of the base oil is required.

In 2015 the product range name was changed. The old product range name was Castrol Inertox range. Castrol Inertox Medium) Fully synthetic inert high-temperature lubricating greases Description The lubricating greases of the Castrol Braycote Inertox series (previous product name Castrol Inertox series) are chemically inert and thermally stable high-temperature greases based on high-quality, fully synthetic base oils and a thickener made of polytetrafluoroethylene. They are used for the long-term lubrication of roller and plain bearings that are subject to high thermal loads. Castrol Braycote Inertox high-temperature greases are used under aggressive environmental conditions and are resistant to inorganic and organic acids and alkalis, even in vacuum systems and clean rooms where a low evaporation rate of the base oil is required.

In 2015 the product range name was changed. The old product range name was Castrol Inertox range. Inertox Heavy) Fully synthetic inert high-temperature lubricating greases Description The lubricating greases of the Castrol Braycote Inertox series (previous product name Castrol Inertox series) are chemically inert and thermally stable high-temperature greases based on high-quality, fully synthetic base oils and a thickener made of polytetrafluoroethylene. They are used for the long-term lubrication of roller and plain bearings that are subject to high thermal loads. Castrol Braycote Inertox high-temperature greases are used under aggressive environmental conditions and are resistant to inorganic and organic acids and alkalis, even in vacuum systems and clean rooms where a low evaporation rate of the base oil is required.

In 2015 the product range name was changed. The old product range name was Castrol Inertox range. Inertox Heavy) Fully synthetic inert high-temperature lubricating greases Description The lubricating greases of the Castrol Braycote Inertox series (previous product name Castrol Inertox series) are chemically inert and thermally stable high-temperature greases based on high-quality, fully synthetic base oils and a thickener made of polytetrafluoroethylene. They are used for the long-term lubrication of roller and plain bearings that are subject to high thermal loads. Castrol Braycote Inertox high-temperature greases are used under aggressive environmental conditions and are resistant to inorganic and organic acids and alkalis, even in vacuum systems and clean rooms where a low evaporation rate of the base oil is required.

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication.

Special grease for the long-term lubrication of ball and plain bearings where electrical charge is possible, e.g. in electric engines, foil- stretching and foil-printing machines, etc. Advantages and benefits Long-term lubrication grease with a wide temperature range and good corrosion protection The special lubricating concept makes sure that electrostatic charges in roller bearing applications are destaticized through the grease, so that local discharges are avoided Proven especially for the lubrication of roller bearings below 1 ampere

Lubrication of friction and rolling bearings of all kinds at all permissible speeds and subject to high pressure loads, in particular of heavily loaded rolling and taper roller bearings, e.g. on rolling stands, hot and cold shearing systems, sliding blocks and spindles Advantages and benefits Excellently suited for long-term lubrication of grease lubricating points subject to heavy loading Highly effective due to outstanding EP additives and high resistance to water

Grease lubrication of plain and rolling bearings in high-temperature range, where a mineral oil based grease cannot be used, e.g. on hot-air blowers and fans, autoclaves, drying ovens or systems in steelworks and foundries Advantages and benefits Drip-free hot bearing grease for a broad temperature range with high oxidations stability and moisture resistance Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum high-performance formula Broad range of uses outside normal grease performance areas

Lubrication of rolling bearings at operating temperatures of -50°C to +180°C For long-term lubrication of temperature-stressed electric motor bearings, e.g. in household appliances or of bearings which are to start up easily at low temperatures Initial lubrication of roller bearings, such as ball bearings that are open, closed on one side, or sealed off on both sides Advantages and benefits Broad range of uses outside normal grease performance areas Reduces wear and friction High resistance to oxidation Wide operating temperature range and good low-temperature properties Very good corrosion protection Very good compatibility with most plastics and elastomers

Dry lubrication with solid lubricants for long-lasting efficiency at low sliding speed and with high surface pressure Long-term lubrication with excellent protection against wear for increased service life of slide areas Fully effective even after longer downtimes; no adherence of dust and dirt Advantages and benefits High-strength long-term antifriction bonded coating with high efficiency through good adhesion on prepared surfaces Constant friction value of the sliding film even under extreme load Increased protection against wear of otherwise not accessible slide areas

Extreme-temperature grease on the basis of perfluorinated polyether oils (PFPE) for use in food processing technology at maximum loads and temperatures. Grease lubrication of friction and rolling bearings in the high-temperature range Application, for example at tunnel kiln cars, baking, burn-in and drying furnaces, hot gas units, reaction vessels, boiler plants, roller and conveyor rollers in continuous furnaces, etc. Use at bearing points under influence of chemicals/fuel Advantages and benefits Maximum water and steam resistance Extraordinary resistance to chemicals, for example to solvents, for example benzene, benzol, acetone, trichloroethylene and against inorganic acids, such as sulphuric acid, hydrochloric acid and nitric acid as well as stearic acids, alcohols and halogens Excellent plastic and elastomer compatibility For long-term lubrication of lubrication points subjected to high pressure up to 300°C

Lubrication of rolling and friction bearings, joints, linear drives, guides For the lubrication of fittings, seals, moulded parts and elements of elastic rubber materials in the hot- and cold-water segment Advantages and benefits NSF H1 registered Can be used universally due to good high-temperature properties, long-term lubricating effect and good adhesive strength on metal surfaces Resistant to hot and cold water, water vapour, watery-alkaline and acidic disinfectants and cleaning agents High resistance to oxidation and ageing

Multipurpose oil for bearing, lever and joint lubrication Hydraulic oil for use in all areas in which physiologically harmless are required Compressor oil for piston compressors for prescribed oil ISO VG 100 Advantages and benefits NSF H1 registered Long economic operating times thanks to optimal additives against oxidation and ageing Good cold behaviour Resistant to cold and hot water, steam as well as disinfectants and cleaning agents For universal use due to long-term lubrication and high adhesive strength Good wear protection Tasteless and odourless Conforms to VDL requirements

Lubrication of heavy loaded toothed gears and worm gears exposed to outdoor conditions and/or low temperatures, as well as tilted or vertical shafts, especially with gear designs which are not oil-tight Lubrication of friction bearings with minimal bearing clearance or high circumferential speeds Advantages and benefits Long-term lubrication due to excellent resistance to oxidation and ageing Wear reduction at maximum loading Prevents leakage with angled or vertical shafts due to good adhesion on metallic surfaces Flowing structure prevents grooving in gear units with continuous coverage of surfaces

Grease lubrication of plain and rolling bearings at high temperatures, e.g. in painting and drying ovens, converters, pouring ladles, heating systems, hot-air fans, charging cranes, vulcanising systems and electric motors Advantages and benefits Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum solid lubricant formula Broad range of uses above normal grease performance areas Reduced maintenance and lubricant costs due to possible safety lubrication Drip-free hot bearing grease for long-term and safety lubrication in a broad temperature range For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease.

Lubrication of dirt-sensitive sliding points in mechanisms Assembly lubrication with large lubricant reservoir, e.g. chucks in which a supplemental relubrication at longer intervals with grease guns is possible Advantages and benefits Excellently suited for dirt-free assembly and long-term lubrication Highly effective due to optimum solid lubricant combination Broad range of uses in area of parts sensitive to soiling Low consumption due to formation of highly effective lubricating films Good corrosion protection behaviour For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610 or OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants.

Long-term lubrication of dirt-sensitive sliding points under vibration stresses Particularly suitable for lubricating chucks on tool machines Broad range of uses at stress-loaded parts, also at contact with cooling lubricants Lubrication of control and drive mechanisms Can be used at filling, labelling and packaging machines Advantages and benefits Resistant to water, steam and aqueous cooling lubricants Prevents frictional corrosion reliably Highly effective due to optimum solid lubricant combination Minimal consumption due to formation of highly effective lubricating films For optimum adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly to the functional surfaces with a brush, spatula, etc. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants.