Wire cutting - Import export

TABLE MONOBLOC SEALER WITH MANUALLY OPERATED SEALING BAR AN INCORPORATED ROLL HOLDER The SP 600 is equipped with sealing bar with NI-CR wire for simultaneous cutting and welding of the film. Allows to obtain a polyethylene or polypropylene bag, perfectly welded and trimmed, using the normal fold film. Suitable for use in laundries, shirt factories, the textile sector in general, but is also suitable for the food sector for the packaging of the bread. Operation: Place the coil with the open side facing the operator Insert the open-film blade between the two flaps Unroll the film to the desired length Lower the sealing bar and cut the bag Enter the product in the bag and make the welding of the side remained open.

Electromechanical mesh cutting machine. It cuts in two directions thanks to the two kW 3 cutting motors, a kW 0.75 press motor and a kW 0.55 feeding motor. It is equipped with Reinforced framework; Continuous shear cutting unit; Rubber inlaid meshpressing beam.

Fast automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 16 mm (#5). Driven by digital electric servomotors. Max pulling speed 240 m/min (790 ft/min) Straighteners (horizontalvertical) with electronic setting Rollers for the extraction of the last part of the coil (Optional) Automatic 6inlets motorized wire change and insertion unit (Optional) Patented motorized horizontal wire change unit which allows to change the diameter and the coil in "Zero time" (Optional) Web Teleassistance

Fast automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4). Driven by digital electric servomotors. Max pulling speed 240 m/min (790 ft/min) Straighteners (horizontalvertical) with electronic setting Rollers for the extraction of the last part of the coil (Optional) Automatic 5inlets motorized wire change and insertion unit (Optional) Patented motorized horizontal wire change unit which allows to change the diameter and the coil in "Zero time" (Optional) Web Teleassistance

Automatic wire straightening and cutting machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4). Driven by digital electric servomotors. Capacity 2 Ø 10 mm (#3) Max pulling speed 150 m/min (495 ft/min) Straighteners with independent position and adjustment displays for the wires Cutting with Brushless Motorized wire change unit Web Teleassistance

Bidirectional automatic stirrup bender from coil for the production of stirrups and cuttosize bars using wires up to Ø13 mm (#4). Driven by digital electric servomotors. Prima 13 automatic stirrup benders are equipped with Max. pulling speed 130 m/min (430 ft/min) Straighteners with independent position and adjustment displays for the 2 wires Cutting with Brushless motors Web Teleassistance

Mesh welding machine for the production of electro welded meshes supplied by bars and coils. This machine produces electro welded meshes with transversal wires prestraightened and cut to size and longitudinal wires supplied directly from coils. The mesh maximum width is equal to 1250 mm and the length is unlimited. These electrowelded mesh are used for the production of prefabricated sandwich panels.

Integrated plant to cut and stock precut bars made of fast automatic straighteners with rollers (such as RETA) and coil processing up to Ø 20 mm. Pulling speed up to 300 m/min. The plant is fully customizable and modular thanks to a wide range of available accessories. Fast Coil change patented system of automatic horizontal wire change (Optional); Straighteners (horizontalvertical) with electronic and independent setting for double wire feeding; Cutting with Brushless motors with adjustable wire guide, fixed and mobile cutting blades; Rollers for the extraction of the last part of the coil; Teleassistance.

Bidirectional automatic stirrup bender from coil for the production of stirrups and cuttosize bars using wires up to Ø13 mm (#4). Driven by digital electric servomotors. Prima Smart Pack automatic stirrup benders are equipped with Max. pulling speed 90 m/min (295 ft/min) Straighteners with mechanical memory and independent adjustment on double wire feeding Cutting with Brushless motors Web Teleassistance

Multirotor wire straightening machine using coils up to Ø 20mm for the production of straight bars. 4 wheel drive pulling unit driven by servomotors for high speed production; Maximum pulling speed 140 m/min; The straightening system uses rotors, each one dedicated to a single bar diameter which guarantees perfectly straight bars and wire diameter changes in just a few seconds; Servomotor driven cutting unit guarantees high speed and high cutting accuracy; Twin Version (Optional) with double cutter, double channel, double pulling unit it allows the processing of two bars simultaneously, doubling the productivity of the machine. Lista Bar wire straightening and cutting machine can be equipped with Bundle aligning device on the ground with vibrators (Optional); Indexing carriage for the automatic collection and sorting of the bars produced (Optional); Storage rack pneumatically operated (Optional).

The vertical spoolers which take-up the smooth or ribbed wire coming from the cold rolling line, can be supplied also in the version Mod. BVD with double reel, for reducing the downtimes. Tecno Impianti designs and manufactures this machine both in the version with manual cut of the wire and with automatic blocking and cut of the wire. The double vertical spooler can be supplied in the version for 2 or 3 Tons reels

STRAIGHTENING AND CUTTING MACHINE Model EvoCUT6012 The new Tecno Impianti straightening & cutting machines model EvoCUT are a concentrate of strength, technology and design. They are used for straightening and cutting of smooth wires made of mild steel, stainless steel, brass, copper, bronze etc.; for the latter ones, we have developed tooling with specific geometries and materials. The use of brushless servomotors and very high quality planetary gearboxes for the management of the axes ensure an excellent performance in dynamic, dimensional and quality terms on the finished product. Proportional valves for pressure control allow the operator to store the settings regarding pulling and position transducer for each single application, ensuring the constancy of the set values over the time.

Semi-automatic cheese cutter model for horizontally cutting cheese with steel wire. First an incision is made in the rind after which the cheese is electrically cut horizontally by a stainless steel wire. The whole cutting procedures is waste-free. Technical equipment: motorized circular cutter for precise incision of the rind with no waste clutch controlled wire unwinding and electric cutting also available with manual wire winding wheel presence safety sensors Made in compliance with EC standards Optional accessories: Kit for manually dividing the wheel into 3 – 4 discs

stainless steel wires for cutting expanded materials