Results for
FERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1030 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The telescopic structure of the elevator, thanks to the minimum height of the mast of 2080 mm, it allows to pass under the majority of doors and openings. The lifter height of 2080 mm also keeps raising the load to a height of about 15-20 cm.Over 20 cm of lifting, the structure begins to slip and the height of the trolley increases to reach 3.5 meters when the load is raised to 3 meters. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.
Request for a quoteFERPLAST SNC
Italy
MMANUAL LIFTER FOR PALLETS MOD. FPSDJ 1500 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The model FP SDJ 1500 is equipped with double chain for lifting. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1016 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1012 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1010 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder ( for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.
Request for a quoteFERPLAST SNC
Italy
ME SERIES HI - single bar 5 mm. (suitable for medium thick envelopes in PE, polypropylene, coupled light) Welders Series ME HI 5 mm with closure lever, allowing the sealing of heat sealable plastic bags with thickness up to 0.40 mm total. The models ME HC 5 mm are equipped with cutter for trimming of the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. The sealers ME HC are available in sizes 300, 400 and 500 mm. This series of sealers makes a sealing of 5 mm, very beautiful and suitable for food bags or if you want a more valid and robust sealing than the standard 2 mm. This sealers have a impulse sealing (resistance heats for a few seconds) and a timer for adjusting the sealing time. The sealing cycle is indicated by an indicator light. With manual sealing bar, sealing width 5 mm., Maximum thickness of 0.20 mm weldable. (mm. 0.40 total).
Request for a quoteFERPLAST SNC
Italy
Impulse manual bag sealers machines FPS series are the simplest and most economical series of sealers machines. The model FPS-C is equipped with a cutter for trimming the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. This model is only available in sizes 300 and 400 mm. The sealers FPS/FPS-C are suited to a medium-low production and allow the closing of plastic bags without folding, with maximum thickness of 0.15 mm (0.30 mm total). The sealing is by impulse (the resistance heats for a few seconds) and can be adjusted by timer. The sealing cycle is generally 3 seconds and is indicated by an indicator light. These sealers has a sealing width of 2 mm.
Request for a quoteFERPLAST SNC
Italy
MANUAL CLIPPER FP HR 45M FOR GABIONS Large sturdy manual clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm. Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections.
Request for a quoteFERPLAST SNC
Italy
MANUAL TRACTION LIFTER WITH BATTERY LIFTING SERIES FPTX SEMI-E - shipped fully assembled! The price shown includes 1 battery 12V or 24V and high-frequency charger Practical, handy and high quality forklift. The forklifts FPTX series are featured with manual advancement and electric lifting. Their great stability is suitable for lifting very heavy loads safely. The version FPTX 12 is equipped with the standard polyurethane wheels, for maximum smoothness even with higher loads and 24 Volt batteries. Operating conditions 0-40 °C Degree of electrical protection IP 20 Available in the following versions: FPTX 1009 max. load 1000 kg, lift height 810 mm FPTX 1016 max. load 1000 kg, lift height 1510 mm FPTX 1020 max. load 1000 kg, lift height 1910 mm FPTX 1225 max. load 1200 kg, lift height 2410 mm FPTX 1229 max. load 1200 kg, lift height 2810 mm FPTX 1235 max. load 1200 kg, lift height 3410 mm
Request for a quoteFERPLAST SNC
Italy
MANUAL NUMERICAL AND ALPHANUMERIC PRICING MACHINES FP-PRZ SERIES WITH 1 PRINT LINE FOR LABELS 26x12 mm wave The manual pricing machines are suitable for printing prices, dates, lots, deadlines and codes on adhesive labels. They are particularly suitable for use in the food sector, where it is necessary to specify batches and expirations of the products and wherever it is necessary to label. The pricing machines produce numerical or alphanumeric writings on a print line and depending on the model the printable characters can be 8 or 10. The 26x12 labels are available only in wave form and the most used are white, however it is also possible to request other colors and pre-printed. The characters of the pricing machines can be: - numeric: all numbers with dashes and currency symbols (£/€/$). - alphanumeric: all numbers and letters WITHOUT currency symbols
Request for a quoteFERPLAST SNC
Italy
MANUAL NUMERICAL AND ALPHANUMERIC PRICING MACHINES FP-PRZ2 SERIES with 1 or 2 PRINT LINES FOR LABELS 26x16 mm rectangular and wave shape The manual pricing machines are suitable for printing prices, dates, lots, deadlines and codes on adhesive labels. They are particularly suitable for use in the food sector, where it is necessary to specify batches and expirations of the products and wherever it is necessary to label. The pricing machines produce numerical or alphanumeric writings on one or two printing lines and depending on the model the printable characters can be from 8 to 10 per line. The 26x16 labels are available in wave and rectangular format. The most used are white, however it is also possible to request other colors and pre-printed. The printing lines of the pricing machines can be: - numeric: all numbers with dashes and currency symbols (£/€/$). - alphanumeric: all numbers and letters WITHOUT currency symbols.
Request for a quoteFERPLAST SNC
Italy
The hydraulic davits are made of a sturdy steel frame, nylon wheels for easy handling, telescopic arm with swiveling hook, hydraulic pump with hand lever actuation. FOLDABLE CRANE-SCFP 1000A Painted steel structure Front supports folding for easy transport and storage Telescopic arm with 3 positions Hydraulic pump with lever Nylon wheels with high smoothness Lifting piston chromed Safety valve to prevent overloading Strong hook with 360 ° rotation Test with overload of 125% CE compliance
Request for a quoteFERPLAST SNC
Italy
ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing bar (heats above and below) and the 5 mm sealing they allow the closure of envelopes with high thickness, laminated and envelopes with bellows. In addition to sealing polyethylene, polypropylene, coupled paper, aluminum, pvc and medical bags, it also allows the sealing of advertising banners. To seal the banners, we recommend sending samples, without obligation, to carry out the sealing tests. Maximum sealable thickness 0.20 mm (0.40 tot). Timers for regulating the sealing and cooling temperature ensure maximum reliability on all types of material.
Request for a quoteFERPLAST SNC
Italy
Sealer machine with quick closing lever for sealing bags in plastic material heat-sealable, with impulse sealing (resistance heats in a few seconds) and timer for adjustment. The welding cycle is indicated by an indicator light. The double sealing bar (top and bottom) with welding of 10 mm allows the closing of envelopes with high thickness, coupled bags and bellows. Through a selector switch, you can choose whether to use one or two welds. The maximum thickness of weld is 0.25 mm x 4 (total 1 mm).
Request for a quoteFERPLAST SNC
Italy
Lift height mm. From 1500 to 2000. Robust and reliable. Forklift with manual traverse and battery lifting. Practical and manageable is very useful for lifting loads up to 100 kg or 200 kg depending on the model. Depending of the optional mounted, can be used to lift boxes, handling reels or hooking products to hook "G". The lowering frame allows it to fit under the standards pallets to achieve reels or boxes positioned in the center to the pallet. Supplied with batteries and charger. Available in the following versions: BIG 100/150 capacity 100 kg Lifting height 1500 mm BIG 100/175 capacity 100 kg Lifting height 1750 mm - mast height mm. 2170 BIG 100/200 capacity 100 kg Lifting height 2000 mm BIG 200/150 capacity 200 kg Lifting height 1500 mm BIG 200/175 capacity 200 kg Lifting height 1750 mm - mast height mm. 2170 BIG 200/200 double capacity: 200 kg with lifting height 1500 mm / 100 kg with lifting height 2000 mm
Request for a quoteFERPLAST SNC
Italy
LIFT WINCH STACKER WITH AUTOMATIC CLUTCH MOD. ARG W 181 Practical and functional allows to lift loads of 180 kg up to a maximum of 2450 mm. The exclusive hand winch can lift the load with minimal effort and, through the built-in automatic clutch, you can stop to any point in the ascent lifting. The descent of the load is only possible if the operator acts on the winch and intentionally causes its gradual descent.Equipped with strands of rope fiber core, push handles horizontal system of brake pedal, aluminum and epoxy powder coating oven-dried. Painting RED - BLUE - YELLOW according to availability.
Request for a quoteFERPLAST SNC
Italy
SEMI-ELECTRIC LIFTER MOD. FPE 150 A/200 H Manual traction and electric lifting, suitable for lifting loads weighing up to 150/100 kg. up to a height of 1500/2000 mm. Practical and easy to handle with manual traction and electric lifting, the mod. FPE 150 A is able to lift loads with maximum weight of 150 kg to a height of 1500 mm, while mod. FPE 200 H lifts loads up to 100 kg to a maximum height of 2000 mm. The small size and light weight makes it suitable in shops, workshops, offices, kitchens, etc.. The battery 24 V-12 Ah. maintenance free, combined with a robust motor and electronic control with overload protection ensures safe and reliable operation. The battery charger is integrated. To ensure maximum safety, the lifting system is equipped with fall arrester belt.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
Dual heat multipurpose. Hand held constant heat sealer. Ideal for sealing clam shells or for tacking. Supplied with a high and low temperature control switch and proportional temperature control system. To spot seal OPS, PSP, PVC, and EPS food container.
Request for a quoteFERPLAST SNC
Italy
Tabletop manual bag sealers with manual closing and electromagnetic block. Impulse heat sealing (the resistance heats for a few seconds) with timer for adjusting the sealing time and a timer for adjusting the cooling time. The sealing cycle is indicated by an indicator light. Sealing bar length: mm. 300 - 400 and sealing width of 5 mm, maximum thickness weldable 0.20 mm(mm. 0.40 total). Suitable for sealing plastic polyethylene bags of medium thickness, polypropylene, light coupled polyethylene + aluminum / paper.
Request for a quoteFERPLAST SNC
Italy
MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.
Request for a quoteFERPLAST SNC
Italy
MANUAL DISTRIBUTORS OF LABELS MOD. TOWA AP 65 Manual dispenser for pre-printed labels on rolls. Fast and precise on flat and curved surfaces. The patented Mecha-sensor system automatically adjusts the application pitch according to the length of the labels. Each time the lever is operated, the label advances by max. 60 mm., If the label is longer, several drives are required.
Request for a quoteFERPLAST SNC
Italy
The woven strap is widely used when you need to tie and secure the products by means of ligatures that are not constituted by iron or plastic strap. Woven strap features: - Excellent tension maintenance. - Perfect elasticity in case of shock. - No conjunctions. - It ensures minimum wastage. - Perfect winding. For the ligation you need a tensioner, the strapping band, the buckles and a strap-holder trolley to prevent strap damage. Different types of straps, more professional strapping tools and various types of trolleys are available on request.
Request for a quoteFERPLAST SNC
Italy
The operator wrap the product with the strap, put the two ends through the buckle and places into the strapping tool. The first end is locked with the brake while the second is placed under the cutter and inside the tension roller. Increasing the tension of the strap, the buckle keeps the tension. After reaching the desired tension the strap is cut automatically by the tensioning device.
Request for a quoteFERPLAST SNC
Italy
This kit is the easiest and most economical kit for strapping and is used especially when you do not need a battery tensioning device or larger coils. This kit is suitable for strapping of pallets up to 800 kg, considering putting two straps for each pallet. The holding capacity of strap dipends on material type and on strap choice.
Request for a quoteFERPLAST SNC
Italy
The most common manual strapping tool for plastic straps. Practical and economical, it is particularly suitable for polypropylene strap with width 12 mm and thickness max mm. 0.8. The closure is done with a metallic tooled seal to increase tightness. Upon request, you can use it in fruit and vegetable sector equipping it with a hook for boxes and containers (optional).
Request for a quoteFERPLAST SNC
Italy
Semi-automatic sealless steel strapping tool, with pneumatic tensioning and manual sealing of the strap. It requires a flat support surface with a minimum length of 200 mm. For use with glossy or blue strap from mm. 13 to mm. 19 with a maximum thickness of 0.60 mm. The holding capacity of strap dipends on material type to strap and on strap choice.
Request for a quoteFERPLAST SNC
Italy
Manual strapping tool for flat surfaces (sealless), easy and reliable to use in heavy industrial duty applications. Version equipped by steel made tension lever and rear feedwheel protection. It requires a flat surface with a minimum length of 150 mm. Works with glossy or blue steel strap from mm. 13 to mm. 19 with thickness up to 0.70 mm. The tightness of the seal depends on the material type and the strapping choice.
Request for a quoteFERPLAST SNC
Italy
Manual strapping tool for flat surfaces (sealless). Manual steel strapping tool easy and reliable to use in medium/heavy industrial duty applications. It requires a flat surface with a minimum length of 150 mm. Works with glossy or blue steel strap from mm. 13 to mm. 19 with thinkness up to 0.6 mm. The tightness of the seal depends on the material type and strapping choice.
Request for a quoteFERPLAST SNC
Italy
Manual steel strapping tool, lightweight and sturdy, with sealless joint. Suitable for medium/heavy duty packages with flat surface for supporting the tool. It can be also used on packages with irregular shape, however a flat surface with a minimum length 150 mm is needed. Works with glossy or blue strap mm. 13-16-19 with thickness max. 0.6 mm. The holding capacity of strap dipends on material type to strap and on strap choice
Request for a quoteResults for
Manuals - Import exportNumber of results
73 ProductsCountries
Company type
Category