Thread taps - Import export

Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: Overlengthed (long shank) L=120 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Overlengthed (long shank), L=120 Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Helicoil finishing HSSE tap for metric thread inserts. For manual use and use in through holes Complies with DIN 81402 It is the most popular Helicoil STI tap, as in many cases it can be used without the need for roughing and bottoming taps. It also included in our Thread repair kits For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Thread standard: Metric Fine, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: For high-tensile materials Material of product: HSSE Surface treatment: no For materials: Wear resistant steel Tensile strength up to: 1000 N/mm2 Standard: DIN 2181 Tolerance: ISO2/6H Set of 2 taps (taper, finish). Two-piece hand taps- sets are used for fine threads with a smaller pitch than with coarse thread, as the thread profile surface is smaller than with coarse threads and the force effects on the taps are smaller. The advantage of two-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts the remaining thread profile to produce the 100% full and usable thread.

Helicoil finishing HSSE tap for inch sized UNF thread inserts. For manual use and use in through holes Complies with DIN 81402 It is the most popular Helicoil STI tap, as in many cases it can be used without the need for roughing and bottoming taps. It also included in our Thread repair kits For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Helicoil finishing HSSE tap for inch sized UNC thread inserts. For manual use and use in through holes Complies with DIN 81402 It is the most popular Helicoil STI tap, as in many cases it can be used without the need for roughing and bottoming taps. It also included in our Thread repair kits For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

The THREAD-SERT are self-tapping inserts to be installed into cylindrical holes Suitable for installation in a wide range of thermoplastics and thermosets They are particularly designed for applications that may involve a high tensile load Very easy installation, also using a simple screwdriver Available in two versions with o without head. Headed (flanged) version provides bearing surface for the mating component to prevent jack-out. This feature is also useful in applications with electrical contacts Also known as SCREW-SERT, with equivalent shape, features and dimensions

The S10 are self-tapping thread forming inserts to be installed into cylindrical holes Best suited for ductile, softer thermoplastics or thermosets They provide the best pull-out resistance for a post-mold installed inserts Very easy installation, also using a simple screwdriver Symmetrical shape, they do not need to be oriented during installation process, thus can also be easily used in automatic systems Inch versions from 4-40 to 1/4-20 also are available on request

Type H Helicoil HSSE tap for inch sized UNF thread inserts. Compatible with all types of helicoidal thread inserts For blind holes and manual or machine use. Spiral flutes of the tap extract chips from blind holes which allows to avoid stuffing Complies with DIN 81402 For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Type H Helicoil HSSE tap for inch sized UNC thread inserts. Compatible with all types of helicoidal thread inserts For blind holes and manual or machine use. Spiral flutes of the tap extract chips from blind holes which allows to avoid stuffing Complies with DIN 81402 For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Type H Helicoil HSSE tap for metric thread inserts. Compatible with all types of helicoidal thread inserts For blind holes and manual or machine use. Spiral flutes of the tap extract chips from blind holes which allows to avoid stuffing Complies with DIN 81402 For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

A single-thread galvanized steel self-tapping screw with a trilobal shank and single thread with 45°degree angle Cylindrical head Standard Pozidriv-type cross impression (Torx impression is also available upon request) The special shape of its cross-section, the high ratio of the outer diameter to the diameter of the shank, the large pitch of its thread and the narrow angle at the apex of the 45 degrees threads ensure the best anchorage in plastic materials Better distributed and lower value stresses in plastic materials, highly vibration- and tear-resistant tightening, reduced risk of cracking in materials, screwing with low torque value Specially designed to provide reliable fastenings in a wide variety of thermoplastic materials, such as ABS, polyamide e.g. Nylon 6-6, PVC and polycarbonate Very simple installation using a regular screwdriver

Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre-cutting and reworking with the intermediate tap (No. 2) bring the thread into shape. In the last step, the finishing tap (No. 3) is used, which has no ring marking.

Extracts broken taps in one quick and easy operation Available from M3 to M38 and inch equivalents, see data sheet Select tool in relation to tap diameter and number of flutes Hardened steel fingers can also be supplied separately as spares Made in the USA. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for the thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Extracts broken taps in one quick and easy operation Available from M3 to M38 and inch equivalents, see data sheet Select tool in relation to tap diameter and number of flutes Hardened steel fingers can also be supplied separately as spares Made in the USA. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for the thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

A single-thread galvanized steel self-tapping screw with a trilobal shank and single thread with 45°degree angle Pan head Standard Pozidriv-type cross impression (Torx impression is also available upon request) The special shape of its cross-section, the high ratio of the outer diameter to the diameter of the shank, the large pitch of its thread and the narrow angle at the apex of the 45 degrees threads ensure the best anchorage in plastic materials Better distributed and lower value stresses in plastic materials, highly vibration- and tear-resistant tightening, reduced risk of cracking in materials, screwing with low torque value Specially designed to provide reliable fastenings in a wide variety of thermoplastic materials, such as ABS, polyamide e.g. Nylon 6-6, PVC and polycarbonate Very simple installation using a regular screwdriver

A single-thread galvanized steel self-tapping screw with a 30-degree angle. Countersunk head Standard Pozidriv-type cross impression (Torx impression is also available upon request) Reduced core and wide thread pitch for high performance in plastic materials Specially designed to provide reliable fastenings in a wide variety of thermoplastic materials, such as ABS, polyamide e.g. Nylon 6-6, PVC and polycarbonate Very simple installation using a regular screwdriver

A single-thread galvanized steel self-tapping screw with a 30-degree angle. Cylindrical head Standard Pozidriv-type cross impression (Torx impression is also available upon request) Reduced core and wide thread pitch for high performance in plastic materials Specially designed to provide reliable fastenings in a wide variety of thermoplastic materials, such as ABS, polyamide e.g. Nylon 6-6, PVC and polycarbonate Very simple installation using a regular screwdriver

Self-tapping insert installation tool for all types of self-tapping threaded inserts (with cutting slots Ensat 302, with cutting holes Ensat 307 and Ensat 308) and in different materials (galvanized steel, stainless steel, brass, plastic) For manual use Depth of grip adjustable with bushing Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

High quality zinc plated steel self-tapping ensat thread inserts. Made of galvanized steel, conforming to RoHS, this ensures excellent wear and corrosion resistance Long version with three cutting holes, Ensat 308 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Similar to Ensat 307 but longer, so can be applied in thicker materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Short version with three cutting holes, Ensat 307 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Also Ensat 307 inserts are shorter than Ensat 308 and therefore ideal on thinner materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).

High quality zinc plated steel self-tapping ensat thread inserts. Made of galvanized steel, conforming to RoHS, this ensures excellent wear and corrosion resistance Short version with three cutting holes, Ensat 307 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Also Ensat 307 inserts are shorter than Ensat 308 and therefore ideal on thinner materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).

High quality brass self-tapping ensat thread inserts. Particularly suitable for light metals and all types of plastics, both thermoplastics and thermosets This is the most popular model of self-tapping inserts with two cutting slots in the conical end part of the insert. Due to the cutting slots, the thread inserts remain anchored in the material even under strong shocks or vibrations. Suitable for most applications. Ensat 302 standard These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material Made in the EU.

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel This is the most popular model of self-tapping inserts with two cutting slots in the conical end part of the insert. Due to the cutting slots, the thread inserts remain anchored in the material even under strong shocks or vibrations. Suitable for most applications. Ensat 302 standard These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material Made in the EU.

High quality zinc plated steel self-tapping ensat thread inserts. Made of galvanized steel, conforming to RoHS, this ensures excellent wear and corrosion resistance This is the most popular model of self-tapping inserts with two cutting slots in the conical end part of the insert. Due to the cutting slots, the thread inserts remain anchored in the material even under strong shocks or vibrations. Suitable for most applications. Ensat 302 standard These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material Made in the EU.

The single size installation tool for UNF helicoil thread inserts designed for manual use. Can be used for installation of all types of thread inserts, including those complying with DIN 8140, used in the aeronautics and automotive, and also those with a reduced diameter for general use Specially designed for thread inserts of smaller sizes from 4-48 to 10-32 It has a threaded nose and rod so that the thread when inserted will be guided internally by the thread of the rod and externally by the thread of the nose before and a little bit after This installation tool prevents deformation of thread insert even if the operator exerts too much pressure, ensuring easy and safe installation Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

The single size installation tool for UNC helicoil thread inserts designed for manual use. Can be used for installation of all types of thread inserts, including those complying with DIN 8140, used in the aeronautics and automotive, and also those with a reduced diameter for general use Specially designed for thread inserts of smaller sizes from 2-56 to 8-32 It has a threaded nose and rod so that the thread when inserted will be guided internally by the thread of the rod and externally by the thread of the nose before and a little bit after This installation tool prevents deformation of thread insert even if the operator exerts too much pressure, ensuring easy and safe installation Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Long version with three cutting holes, Ensat 308 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Similar to Ensat 307 but longer, so can be applied in thicker materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material

Thread standard: Metric, ISO DIN 13 Type: Combined machine tap (core hole drilling and thread tapping) Application: Combined (core hole drilling and thread tapping) Material of product: HSSE Surface treatment: no For materials: Materials of medium mechanical strength (alloyed and non-alloyed steels up to 600 N/mm², Malleable cast iron, Graphite cast iron, Copper, Brass, Aluminium, Aluminium-magnesium alloys, Zink alloys, Red bronze, Electron metall, Pressure-cast zink) Tensile strength up to: 600 N/mm2 Standard: DIN 357 Tolerance: ISO2/6H Combined machine taps enables the user to produce the tapping drill hole and the through thread in one operation without any tool changing. The tool incorporates a twist drill before the thread-tapping part. It is possible with this tool to produce through threads up to a maximum threaded depth of 2 x D. It is sensible to use this tool on machines possesing an RPM switchover facility for drilling and tapping.

Thread standard: Metric, ISO DIN 13 Type: Combined machine bit tap (core hole drilling and thread tapping) for through holes Application: Combined (core hole drilling and thread tapping) Material of product: HSSG Surface treatment: no For materials: Materials of medium mechanical strength, non ferrous metals and thermoplastics Tensile strength up to: 600 N/mm2 Standard: Factory standard Tolerance: ISO2/6H Combined Bit taps have been designed for drilling, tapping and deburring in one operation using battery-powered screwdriver drills and electric hand drills with right-hand and left-hand rotation, but they are also suitable for thread cutting in a stationary drilling machine. It is possible with this tool to produce through threads up to a maximum threaded depth of 1 x D. They are especially usefull for mounting an dsmall batch production. Take care that the tool and the axis of the hole are exactly aligned and use a suitable cutting oil.