Stainless steel tap - Import export

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel This is the most popular model of self-tapping inserts with two cutting slots in the conical end part of the insert. Due to the cutting slots, the thread inserts remain anchored in the material even under strong shocks or vibrations. Suitable for most applications. Ensat 302 standard These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material Made in the EU.

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Long version with three cutting holes, Ensat 308 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Similar to Ensat 307 but longer, so can be applied in thicker materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material

High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Short version with three cutting holes, Ensat 307 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Also Ensat 307 inserts are shorter than Ensat 308 and therefore ideal on thinner materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).

Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: For stainless steel Material of product: HSSE Surface treatment: VAP For materials: Stainless steel, Wear resistant steel, High alloyed steel Tensile strength up to: 1400 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H The oxide surface (vaporized) improves the adhesion of the cutting oil and provides a stabil lubricant film. Cold welding in the tap flanks is reduced. Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: For stainless steel Material of product: HSSE Surface treatment: VAP For materials: Stainless steels, Copper alloys and copper-zinc alloys etc* Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry and surface treatment for Stainless steel. The oxide surface (vaporized) improves the adhesion of the cutting oil and provides a stabil lubricant film. Cold welding in the tap flanks is reduced. The conical reduced leading thread improves chip drain and reduces thread friction. Tap for machine use in blind holes. The fast spiral flutes provide good chip removal from the blind hole. Materials: Stainless Steels, Inoxable Steels, V2A (AISI 304), V4A (AISI 316), Steels up to 900 N/mm² Copper alloys and copper-zinc alloys (long-chipping) Our taps and dies are produced to the highest quality standards, to ensure precise quality threads.

VALENTINA - Single-lever sink tap Stainless steel supply hoses Without exhaust

MINIMALIST - SINGLE LEVER SINK TAP Stainless steel supply hoses C3515 cartridge

QUADRO - SINGLE LEVER SINK TAP QUADRO Stainless steel supply hoses C3515 cartridge

MINIMALIST - SINGLE-LEVER ROUND SINK TAP Stainless steel supply hoses C3515 cartridge

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible in gray PVC 120cm Black shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Black shower with mechanical

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Chromed shower with mechanical stop.

STANDARD - SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Black shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Chromed shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Chromed shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Black shower with mechanical stop

SATIN SINGLE-LEVER HAIRDRESSER TAP Stainless steel supply hoses length 70 cm Flexible gray PVC 120 cm Satin shower with mechanical stop

SINGLE-LEVER HAIRDRESSER TAP Flexible stainless steel supply hoses, 70 cm long Flexible gray PVC 120 cm Chromed shower with mechanical stop

Single-lever hairdressing tap Flexible stainless steel supply hoses, 70 cm long Flexible gray PVC 120 cm Chromed shower with mechanical stop

Single-lever hairdressing tap Flexible stainless steel supply hoses, 70 cm long Flexible gray PVC 120 cm Red shower with mechanical stop

One space ground-based bike rack in stainless steel with caps.

With reference to the Specification: EN ISO 15983 dome head EN ISO 15984 countersunk head 522 525 Materials: Body: Austenitic stainless steel (A2) - Aisi304Cu - X3CrNiCu18-9-4 (EN 1.4567). Nail: Austenitic stainless steel (A2) - Aisi304 - X5CrNi18-10 (EN 1.4301).