Panels - Import export

STIFERITE Class S a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by saturated fibre glass facers. The Class S panel is suggested for insulation of flat roofs under synthetic mantles inview or weighted down and under bituminous mantles applied cold (not torched), pitched roofs, walls and floors. Also available in version Class SH with compression strength resistance of 200 kPa Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE Class B a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on the top side by a bitumenous mineral fibre facer, ideal for hot torch applications, and saturated mineral fibre facer on the bottom side. The Class B panel is suggested for roofs under bituminous waterproofing mantles and where high resistance to a flame torch is required. Available in Class BH version, with compressive straight resistance of 200 kPa Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE GT a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides with a special facer named Duotwin®. The GT panel is suggested for insulation of pitched roofs, flat roofs under cement slabs or synthetic membranes or bituminous glued, parameter walls, civil and industrial floors. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001 CE conformity marking on the entire line.

Bonded to STIFERITE GT panels with various type of bitumen membranes GT 3 bonded to bitumenous membrane polymer of 3 kg/m², reinforced in fibre glass GT 4 bonded to bituminous membrane of 4 mm, reinforced in TNT polyester GT 5 bonded to bitumenous membrane of kg/m², reinforced in TNT polyester and slate chips’ finish The bonded panels GT 3 GT 4 GT 5 are suggested for insulation and as a waterproofing primer of flat and pitched roofs. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

HEFLOMI is a panel made of a special fabric with an antibacterial and antiviral function that purifies the air from harmful substances and allergens and absorbs bad odors emanating from cleaning products and food, eliminating them. By exploiting the continuous motion of the air, it removes polluting molecules in a process of continuous exchange between the air and its surface.

The stairs panel is made up of a suitably shaped polystyrene (EPS) sheet, wherein the riser and tread can vary according to the needs of the project. The polystyrene is covered by two electrowelded mesh joined by connectors. This prefabricated panel is reinforced and completed with concrete casting in the special ribs inside the EPS polystyrene.

The double panel is made of two single sandwich panels, assembled leaving an intermediate crawl space of variable thickness depending on the type of building and the required wall resistance. These panels, prefabricated in the factory, are completed with concrete casting in the central crawl space the double panel could therefore be defined as a disposable, insulating formwork, whose thickness of polystyrene (EPS) sheets varies according to the insulation requirements. Externally, the double panel is completed using traditional plaster. This insulated precast panel is mainly used for main walls in structures completely built with insulating panels; main walls in structures with wooden roof or any other material.

The Single Panel is a sandwich panel made of two galvanized electrowelded mesh, joined by connectors and by an appropriately shaped polystyrene sheet (EPS) of variable thickness according to specific architectural and insulation requirements. This insulated precast panel, subsequently completed onsite, is used for Main walls in structures completely made with panels, compatibly with the structural inspections and technical standards; Main walls in structures with wooden roof or any other material; Partition walls; Infill walls of residential and commercial buildings; Infill of prefabricated industrial buildings or castings.

The floor panel is a sandwich panel used for floor and roof coverings, whose thickness varies according to the spans and the design loads. This prefab panel, prefabricated in the factory, is generally completed on site by placing concrete into the ribs and upper concrete casting a sort of a disposable, insulating formwork, whose thickness of polystyrene (EPS) varies according to the requirements of insulation and structural resistance. Alternatively, the reinforcement and casting can be done directly in the factory, as for the prefabricated concrete floors. These insulated precast panels are used for floors of structures completely made with panels; floors of buildings made with prefabricated structures, onsite castings or made with metal structure; floors of prefabricated modules.

STIFERITE FIRE B a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on one side by a mineralized fibre glass facers, and the other, to be positioned on toward the side more exposed to the risk of fire, by fibre glass with additional mineral fibre named STIFERITE FIRE B facer®. Specifically suggested for insulation of ventilated facades (it meets the requirements of the Technical Guide of “Anti fire safety requirements of facades in residential buildings” dated 15/04/2013). The FIRE B panel is suggested for Insulation of walls as in “ventilated facades”. Insulation for all applications where elevated fire reaction performance as in organic material insulation is required. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE Class SK a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by saturated fibre glass facers. The Class SK panel is suggested for external insulation walls in ETICSystem applications, correction of thermal bridges and porticoes. Panel used in ETICSystems with certification ETA Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE GTE a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered by a GasTight multilayer aluminium foil facer reinforced on one of the sides by glass netting. The GTE panel is suggested for insulation of pitched roofs or flat roofs under synthetic mantles, walls, normal and heated floors, and applications requiring a vapour barrier. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE RP is an high performance insulation board manufactured from CFC or HCFC free closed cell rigid polyisocyanurate polyiso foam. It's covered on both side with multilayer facing, and bonded to one side with a 13 mm (1/2 inch) plasterboard. It is available on request RP1 WP made with STIFERITE and a waterrepellent plasterboard 13 mm The RP panel is suggested for insulation of internal walls and suspended metal frame ceilings. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

Bearing walls in single sandwich panel Roof in single sandwich panel.

The software, designed by Schnell Home engineers, makes the production and installation of prefabricated sandwich panels much easier. The software works with AutoCAD and calculates the m² of insulating panels, the optional mesh , the quantities of materials and the necessary manpower hours; executes the production list by listing the number and dimensions of the different sandwich panels to be produced; produces the drawings to be used on site for the assembly and cutting of polystyrene panels (EPS); the cuts are calculated to optimize the production and minimize wastes.

Electromechanical automatic mesh cutting and bending machine for the production of U, L, Zshaped mesh and sandwich panels. Mesh handling is guaranteed by clamps driven by electric servomotors. Max mesh width 1250 mm; Max mesh length 6000 mm.

Robotic plant for the production of prefabricated sandwich panels made up of one or more assembling machines working side by side fed by a robot that loads the produced mesh and the polystyrene sheets that have already been cut. Once assembled, another robot placed at the end of the machine, unloads, stacks and binds the polystyrene panels to be used as main walls, partitions and infill walls of prefabricated and industrial buildings.

Mesh welding machine for the production of electro welded meshes supplied by bars and coils. This machine produces electro welded meshes with transversal wires prestraightened and cut to size and longitudinal wires supplied directly from coils. The mesh maximum width is equal to 1250 mm and the length is unlimited. These electrowelded mesh are used for the production of prefabricated sandwich panels.

Polistop is a sandwich panel that integrates with the traditional structures made of two galvanized electrowelded mesh, joined by connectors, and a suitably shaped polystyrene (EPS) sheet; the sheet can have a variable thickness according to the architectural and insulation requirements. This precast insulating panel, subsequently completed on site, can be used for fast building and excellent insulation Infill walls of residential and commercial buildings; Infill of prefabricated industrial buildings or on site castings; Partition walls.

STIFERITE BB a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by reinforced bitumenous paper. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

STIFERITE AI6 Edilizia a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on both sides by a 60 μm thick embossed aluminium facer. The STIFERITE AI6 panel is suggested for walls and floors. Ideal for applications requiring a vapore barrier. Available in AI8 version, embossed aluminium facer of 80 µm. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line..

Specific for preinsulated ductwork

STIFERITE Isoventilato a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on the top side by a water impermeable and vapore permeable Laminglass facer, and on the botton side by a saturated mineral fibre facer. Incorporated into the foam of the Isoventilato panel are wood (OSB3) laths that run along the entire length of the top side of the panel. The Isoventilato panel is suggested for insulation of ventilated roofs. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

PLB001 series efficient line lights provide 110° light beam angle, which can be used in lighting solutions such as retail stores and office spaces. It is mainly used as the main lighting for bright stores, offices, warehouses and other spaces, and is perfectly integrated into the ceiling

PLB002 series efficient line lights provide 110° light beam angle, which can be used in lighting solutions such as retail stores and offices. It is mainly used as the main lighting for bright stores, offices, warehouses and other spaces. 25W can replace similar 40W LED fixtures, control glare while ensuring high luminous efficiency.

Electric control panel and stirrers operation, with milk temperature display with relative processing times and relative electro-pilot for closing the steam control. Complete with water-repellent panel, IP65 protection rating, which guarantees perfect insulation of the underlying instruments; available with the option: TELEASSISTANCE & DEVELOPMENT SUPERVISION INDUSTRY 4.0 With Recipe management (database management, download / loading recipes in the boiler rooms) and boiler supervision (status display, any commands). Visualization and reporting of production-related statistics.

The panel saw machines perform the horizontal cutting of cheeses of all sizes and consistencies, both hard and semi-hard. Starting from the basic model, the manually operated bench disconnector suitable for delicatessens and small businesses, the range of disconnectors also includes electric and automatic machinery, developed for intensive use, typical of industrial realities. They offer the possibility to cut a large number of cheeses with maximum precision and without any effort or loss of product.

Our machines produce insulated and high resistant EPS panels for the building market.

Panel control