Heating - Import export

High quality heat gun with extensive temperature and airflow control. Two infinitely adjustable air flow rates and a digital display with memory function. Incredibly strong 2000W-motor, which can be quickly reach a temperature of 650°C. The heat gun has an improved thermal safety: the gun will be switched off automatically when the motor overheats. Nominal power consumption: 2000Watt Power supply: 220-240V/50-60Hz Length cable: 2m Working temperature and airflow adjustable in 2 positions: 50 - 650°C Position I: 50°C / airflow 250-500 l/min Position II: 50-650°C / airflow 250-500 l/min 4 mouthpieces included

The HEAT-SERT are inserts for plastic with heat/ultrasonic installation into cylindrical holes Suitable for all types of thermoplastics Designed for installation in notch-sensitive amorphous thermoplastic materials. The rounded knurling reduces stress on the contact surface while avoiding stress on the material in which it is inserted Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet They are available in unheaded and headed (flanged) versions. Headed (flanged) version provides bearing surface for the mating component to prevent jack-out. Also a screw can be inserted on the opposite side of the flange, allowing to achieve very high pull-out resistance. It also ensures a large contact area, which is useful for electrical contacts and specific applications Unheaded inserts in addition are symmetrical so they do not need to be oriented during installation process

The S29, S30 (Long version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes These are the longer versions of the S29, S30 inserts for higher torque and pull-out resistance Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates These inserts were designed to provide faster speed and ease of installation, and at the same time maximize torque and pull out performance. The outer profile was made symmetrical with respect to length, so that the insert does not have to be oriented during the installation process. These inserts are therefore suitable for automatic type installations in large volume The S29, S30 offer much higher torque and pull-out resistance than all other inserts Holes sizes are identical to those of the S19 and S20 inserts to provide an easy alternative

The S19, S20 (Long version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes These are the longer versions of the S19, S20 Short inserts for higher torque and pull-out resistance Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The S19, S20 inserts are designed with a wide center knurl coupled with two smaller knurls and deep undercuts on both ends to maximize torque and pull out performance They induce very low radial stresses and are therefore particularly recommended in holes with thin walls. In this case the hole must be a bit wider. Optimal size should be determined after appropriate practical tests Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet

The S14 (Short version) are inserts for plastic with heat/ultrasonic installation into tapered holes with an 8° angle In the short version these inserts offer the advantage of having reduced dimensions, shorter installation times and lower costs. On the other hand, the resistance to torque and pull out loads is reduced comparing to long version Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The tapered form facilitates proper seating and maximizes the surface contact between the insert and hole wall prior to the application of heat or ultrasonic vibration. These inserts are the best choice when using ultrasonic insertion techniques The insert's straight-toothed upper ring and oblique-toothed middle ring provide high torque and pull out resistance, ensuring complete filling of the plastic material in the cavities below Installation must be carried out using heat conduction or ultrasonic machines.

M.E.G.A.’s forging and heattreatment division is capable of forging fittings (in a closed die) up to 4” 16 kg. The heat treatment furnaces and tanks are all certified to Norsok M650 and ASTM A991 standards and can treat any product that M.E.G.A. produces (large and small forgings, pipes and any other type of part).

Heat treatment OPERATING TEMPERATURE: MAX 1200°C Standard power, size and shape or as indicated by the customer. Complete electrical BOXES with CONTROL and SAFETY systems (thermocouples). Stainless steel casing. Room insulation with technical material REFRACTORY and FIBROCERAMIC. Heating by resistive filament* SPIRAL. VIDEO: LINK

Standard power, size and shape or as indicated by the customer. Stainless steel casing. TYPE CERAMIC FIBRE: WORKING TEMPERATURE: MAX 850°C Armour in stainless steel or ALUSI sheets Internal insulation in ceramic fibre. Resistive wire* internal insulating TYPE MICANITE: WORKING TEMPERATURE: MAX 280°C Armour in stainless steel or ALUSI sheets Internal insulation in micanite Resistive wire* internal insulating ARMOURED TYPE: WORKING TEMPERATURE: MAX 700°C Armour in stainless steel Heater*, consisting of a ARMOURED heating element with stainless steel tube. Element development up to 8.00 m. Resistive internal filament* insulated with first choice MAGNESIUM OXIDE.

The wheel core of the RXT series is manufactured in special Ditherm® compound, combined with special fibers and molded under an innovative DC developed high pressure + extreme temperature process, and its tyre is made in a special high quality elastic rubber for high temperatures. The white rubber tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or vulcanization such as for almost any competition product. This particular bonding is resulting in the highest quality wheel in its range of application, featuring a drastic reduction in the risk of tyre de-bonding during the work in temperatures. They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement. The RXT wheels can be fitted into a specific series of brackets for high/low temperatures.

The wheel core of the RHT series is manufactured in special Ditherm® compound, combined with special fibers and molded under an innovative DC developed high pressure + extreme temperature process, and its tyre is made in a special high quality elastic rubber for high temperatures. The black rubber tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or vulcanization such as for almost any competition product. This particular bonding is resulting in the highest quality wheel in its range of application, featuring a drastic reduction in the risk of tyre de-bonding during the work in temperatures. They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement.The RHT wheels can be fitted into a specific series of brackets for high/low temperatures.

The XTW series is the only wheel which is assuring a temperature resistance up to +400°C and not being made out of aluminum or cast-iron, with the big advantage to preserve the floor and to secure a dramatic reduction of noise if compared to metal wheels.They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement. The XTW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted in the world of uses in temperatures and bakery / food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304 / 316, and are available in both metric and inches standard sizes, and are also available in double-layer galvanized pressed steel. They are RoHS - REACh compliant.

The STW series wheels are manufactured with an exclusive DC Di Candia Ruote’s composite material, the THT, which has been studied and developed in our plant in Besnate, and is used exclusively for the production of this wheel range. These wheels grants a superior and unmatched mechanical resistance to heavy impacts, an outstanding resistance against chipping and breaking caused by hitting of sharp obstacle and a great rolling capacity even in plain bore configuration, thanks to the self-lubricating properties of the THT material. They also assure an incredible resistance against aggressive cleaners, chemicals, oils, acids, steam and salty water, and are available with plain bore and with double special HT ball bearings, to allow a perfect rolling capacity in any condition of use. The THT material is certified by FDA for contact with foods. The STW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced.

Revamping of a furnace

C.R.E. di Verzeni is a certified firm, leader in the production of heating elements for over 50 years. Our experience and skills allow us to establish not only in the Italian market, but also worldwide. Thanks to the purchasing of new machinery technology we have increased our quality standards while reducing production costs. This guarantees our clients, quality at competitive prices. We are official distributors for the main machinery manufacturers of: •Plastic, rubber (press, blow, extrusion, injection etc.) •Chemical/Pharmaceutical •Food (dryers and mixers) •Packaging •Water sector •Etc. C.R.E. di Verzeni is characterized by: One of the best quality on the European market--we got UNI EN ISO 9001-2000 certification Italian design with customized products Good quality/price ratio Fully made in ItalyProduction times: 7 days after your order and if urgent up to 24hours after the order (depends on the type of heater). On our website www.creverzeni.com