Results for
FERPLAST SNC
Italy
Sealer machine designed for sealing of packaging of any size in the barrier material (polypropylene, paper and aluminum). Thanks to the small size and limited weight can be used in any place. The clamp sealing double hot bar is available with width mm. 200, mm. 300 and mm. 400 and the welds are repeatable, side by side, regardless of length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C by a temperature controller positioned on the caliper.
Request for a quoteFERPLAST SNC
Italy
The ME-FD double Impulse sealers with pedestal incorporate twin elements (top and bottom) for heavy-duty applications and can accommodate up to 0.5mm material. Makes a 5 mm wide seal and fuses the material from both sides. Ideal for sealing large heavy bags. Also equipped with slide switch to select single side sealing or double sides sealing. By having a foot control, the hands are free to feed the machine. Units come complete with pedestal, stand, adjustable working plan and adjustable foot control. The sealing time is adjustable with a timer and is indicated by a light. Easy and simple to operate. No pre-heating required. Maximum seal thickness 0,25 mm. (0,50 mm total).
Request for a quoteFERPLAST SNC
Italy
ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing bar (heats above and below) and the 5 mm sealing they allow the closure of envelopes with high thickness, laminated and envelopes with bellows. In addition to sealing polyethylene, polypropylene, coupled paper, aluminum, pvc and medical bags, it also allows the sealing of advertising banners. To seal the banners, we recommend sending samples, without obligation, to carry out the sealing tests. Maximum sealable thickness 0.20 mm (0.40 tot). Timers for regulating the sealing and cooling temperature ensure maximum reliability on all types of material.
Request for a quoteFERPLAST SNC
Italy
Impulse sealer with mechanical pedal and floor support for the closure of bags in plastic material heat-sealable, impulse sealing (resistance to heat for a few seconds) and timer for adjustment. At the end of the sealing is possible to trim the bag with the cutter installed on the bar. The open structure also allows you to install a coil on the back of the machine and to obtain envelopes of the desired length using the tubular film. The sealing head can be tilted up to 45 ° to allow the closure of the envelopes containing liquids or powders. Maximum thickness of 0.15 mm sealable . (0.30 mm. Overall)
Request for a quoteFERPLAST SNC
Italy
Semiautomatic table top version or with pedestal sealing machine with electrical pedal and double sealing impulse bar, (resistance to heat for a few seconds), suitable for closing envelopes polyethylene, polypropylene, PVC, coupled in aluminum, etc. The closing of the sealing bars by pressing the electric pedal with solenoid allows the operator to have both hands free. The timers for adjusting the sealing and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. The double sealing bar (above and below) and the sealing of 5 mm. allows the closing of envelopes with thick, laminated bags and bellows. Through a selector switch, you can choose whether to use one or two sealing bars. Maximum solderable thickness 0.25 mm. (0.50 mm. overall). It's also available the model ME 6010 FDA / FDV with 600 mm sealing bars and 10 mm welding.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
ME-ASD SERIES with 10 mm DOUBLE SEALING BAR BY IMPULSE WITH TEMPERATURE CONTROL Semiautomatic bench sealing machine with electric pedal and double impulse sealing bar with temperature control, (an electronic circuit prevents overheating and allows continuous operation), suitable for closing polyethylene, polypropylene, PVC, aluminum coupled bags, etc. The sealing bars are closed by means of an electromagnet with foot control. Timers for sealing and cooling control ensure maximum reliability on all types of material. The "cold closing" time allows the bars to remain closed for a time set by the operator and apply a pressure that reinforces the sealing. The ME ASD series sealers can in some cases be used for sealing advertising banners and creating pockets for fixing them.
Request for a quoteFERPLAST SNC
Italy
Dual heat multipurpose. Hand held constant heat sealer. Ideal for sealing clam shells or for tacking. Supplied with a high and low temperature control switch and proportional temperature control system. To spot seal OPS, PSP, PVC, and EPS food container.
Request for a quoteFERPLAST SNC
Italy
PORTABLE CONSTANT HEAT SEALER – SUPER CELLO ( for multi-layer bags) T Clamp sealers suitable for the sealing of large packaging in barrier material (polypropylene, laminated paper and aluminum) and polyethylene. Thanks to the power cable of 4.5 meters you can move easily around the product to be packaged. The clamp sealer performs a dual hot jaws over a length of 42 cm. The sealers are repeatable, one beside the other, without length limits. The temperature of the sealing bars is adjustable from 60 ° C to 250 ° C by a thermoregulator positioned on the caliper. The longitudinally knurled bars and coated with an anti-adhesive treatment are also suitable for welding polypropylene.
Request for a quoteFERPLAST SNC
Italy
Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal
Request for a quoteFERPLAST SNC
Italy
Tabletop manual bag sealers with manual closing and electromagnetic block. Impulse heat sealing (the resistance heats for a few seconds) with timer for adjusting the sealing time and a timer for adjusting the cooling time. The sealing cycle is indicated by an indicator light. Sealing bar length: mm. 300 - 400 and sealing width of 5 mm, maximum thickness weldable 0.20 mm(mm. 0.40 total). Suitable for sealing plastic polyethylene bags of medium thickness, polypropylene, light coupled polyethylene + aluminum / paper.
Request for a quoteFERPLAST SNC
Italy
Sealing machine with stand and mechanical footswitch, constant heat sealing bars fot the closure of polypropylene bags and coupled in aluminum, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The closing of the sealing bars by a mechanical pedal guarantees a high welding pressure and allows the sealing of high thickness envelopes with or without lateral bellows.
Request for a quoteFERPLAST SNC
Italy
CF SERIES - CONSTANT TEMPERATURE HEAT SEALERS WITH PEDESTAL AND FOOT PEDAL ( for multi-layer bags) THE CF SERIES of constant heat sealers with pedestal and operated by foot pedal, are ideal for sealing bags made of compunds, multi-layer films, co-extruded films, OPP, heat-sealable cellophane. It is not suitable for polyethylene films. Being operated by foot pedal, the hands are free to feed the machine. The sealing jaws of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The temperature of the sealing jaws is adjustable according to the type and thickness of the material to be sealed, and is kept constant by a heat thermo-regulator. The maximum sealable thickness, that always varies according to the type of sealable material, is 0.25 mm. (50 mm. total). Also available in CFN version with timer and acoustic signal at the end of sealing.
Request for a quoteFERPLAST SNC
Italy
ME-CFE CONSTANT AUTO SEALERS WITH MOTOR CONTROL Table top motorized sealer with electric pedal and welding bars at a constant temperature for sealing polypropylene bags and paired/laminated aluminium, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and thermostat for controlling the temperature from 30 ° C to 250 ° C. The closure of the bars it takes place through an engine which guarantees a high welding pressure (0,7 Kg./cm2) and allows the sealing of envelopes with hight tickness with or without side bellows. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag.
Request for a quoteFERPLAST SNC
Italy
MANUAL LEVER SEALER WITH CONSTANT TEMPERATURE Thermosealing machine that works with sealing bars at a constant temperature for the closure of polypropylene bags and coupled/aluminum laminate, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and controller for controlling the temperature from 30 °C to 200 °C. The closing of the bars is through a quick manual lever that guarantees a high sealing pressure and allows the sealing of envelopes high thickness with or without side gusset. Attention: it is necessary to preheat for about 5 minutes. The sealer is available in two models: ME 300 CFH BZ with checkered knurled bars ME 300 CFH BL with longitudinally knurled bars
Request for a quoteTAPPI STAMPATI S.R.L.
Italy
Inspection tank caps male threaded, in plastic material, complete with sealing gasket and fixing flange. We supply two different types of this product: Inspection cap for Ø 124 mm hole Inspection cap for Ø 215 mm hole We can also provide them equipped with safety chain. The inspection tank caps are generally used for canopies of power generators and on tanks of agricultural machines and industrial vehicles, spray dryer, water tanks and so on. We always guarantee quality and reliability of our product over time. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and international regulations.
Request for a quoteResults for
Materials for seals - Import exportNumber of results
16 ProductsCompany type