Results for
INTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Round die Application: General use Material of product: HSS Spiral entry: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 750 N/mm2 Standard: DIN 223 Tolerance: ISO-6g Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads.
Request for a quoteELETTROIDEA SRL
Italy
A double bed with a generous headboard designed for those who prefer important shapes that furnish and become the protagonists of the bedroom. The particularly high and wide headboard is ideal for accommodating soft cushions. There is a choice of numerous fabric or leather upholstery variants.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
1 outlet with detergent dispensing The cleaning and sanitizing activities with traditional methods can be replaced with the use of dry saturated steam, with a considerable advantage on the consumption of water and chemical agents. The steam masters are steam generators designed for cleaning and sanitizing surfaces, equipment and industrial environments.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
DI20 uses dry saturated steam technology for deep cleaning of machinery and environments. It was made primarily for external cleaning and is easily transportable. The combination of heat and pressure creates a powerful cleaning solution that removes all kinds of dirt, grease, oil, tree yield and bird droppings like no other system can.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric Fine, ISO DIN 13 Type: Short machine tap Form D, for through and blind holes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 800 N/mm2 Standard: DIN 2181 Tolerance: ISO2/6H Efficient internal thread cutting. The short structural type makes this tap usable by machine and hand. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants. Brand: Baer Tools (Germany)
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric Fine, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 2181 Tolerance: ISO2/6H Set of 2 taps (taper, finish). Two-piece hand taps- sets are used for fine threads with a smaller pitch than with coarse thread, as the thread profile surface is smaller than with coarse threads and the force effects on the taps are smaller. The advantage of two-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts the remaining thread profile to produce the 100% full and usable thread.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Hexagon die nut Application: General use Material of product: HSS Spiral entry: no For materials: Non abrasive materials Tensile strength up to: 800 N/mm2 Standard: DIN 382 Tolerance: ISO-6g For repairing and cleaning of damaged threads. For use in awkward places. The hexagon die nut is particularly advantageous for repairs, as it can be moved with ring or open-end spanners, making it easier to reach inaccessible places. Thiscutting tool has an external hexagon and - depending on the size - has three or more cutting edges inside. The holes between the cutting edges take up the chips, roll them and carry them away. Hexagonal die nuts are used to cut screws, nuts and threaded rods in everyday use.Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: General use Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use in blind holes. The fast spiral flutes provide good chip removal from the blind hole. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine bit tap Form D, for through and blind holes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: Factory standard Tolerance: ISO2/6H Bit taps have been designed for thread cutting using battery-powered screwdriver drills and electric hand drills with right-hand and left-hand rotation. But they are also suitable for thread cutting by hand or in a stationary drilling machine. Your battery-powered screwdriver drill should have a minimum power of 7.5 Volts. Take care that the tool and the axis of the hole are exactly aligned and use a suitable cutting oil. For thread cutting we recommend using battery-powered screwdriver drills and electric hand drills with lowest rotaionsettings (0 - 450 RPM) and maximum torque settings.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine nut tap Application: General use Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 850 N/mm2 Standard: DIN 357 Tolerance: ISO2/6H Maschine Nut tap for through holes with long shank for taking some thread cutted nuts. For thread depth up to 1,0 times diameter. Also useable for thread cutting in awkward places. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre-cutting and reworking with the intermediate tap (No. 2) bring the thread into shape. In the last step, the finishing tap (No. 3) is used, which has no ring marking.
Request for a quoteS.C.E. COMPANY SRL
Italy
Air conditioning is the operation by which the parameters of relative humidity, temperature and air speed are modified. For this sector, our company deals with the production and sale of copper and iron pipes which can be semi-finished or assembled suitable for different purposes, including: Improve people's well-being. Maintain suitable environmental conditions for the correct conservation of everything that is subject to temperature variations and requires a constant temperature. Allow the correct operation of equipment, removing the heat generated by use and maintaining the temperature constant for correct operation.
Request for a quoteCARISMA DI L. VIANO & C. SNC
Italy
Since 1975 present in Europe with regenerated solvents and thinners, regenerated glycols and polyethylene glycols, solvents for bitumen, acids, end-of-season and non-standard products. We carry out filtrations, neutralizations, dehydrations and rectification of non-standard products. Our regenerates: acetone, acetic acid, formic acid, butyl acetate, ethyl acetate, isobutyl acetate, methyl acetate, methoxypropanol acetate, isobutanol, normalbutanol, sec-butanol, denatured isopropanol, methoxypropanol, methylene chloride, dichloropropane, chlorinated mixtures, dimethylformamide , dimethylacetamide, dibasic esters, butyl glycol, monoethylene glycol, diethylene glycol, triethylene glycol, dipropylene glycol, HCFC141b, MEK, MIBK, n-methyl-2-pyrrolidone, PEG 200, PEG 300, PEG 4000, perchlorethylene, polyols, naphtha solvent, denatured toluene, THF , trichlorethylene, denatured xylene.
Request for a quoteCARISMA DI L. VIANO & C. SNC
Italy
C arisma has its own efficient internal Logistics Office which ensures rapid deliveries by land and sea everywhere, taking care of all operational and regulatory aspects of the transport of ADR and IMO classified chemical products. Our products are delivered: locally in 1000 liter IBCs, in 200 liter drums, in 25 and 5 liter canisters; in customized packaging upon request in Italy and Europe in single-compartment or multi-compartment tankers, in 1000-litre IBCs, in 200-litre drums
Request for a quoteCARISMA DI L. VIANO & C. SNC
Italy
Among the formulated products treated by Carisma of Turin we highlight: Eco-friendly PVC glues Chlorinated base PVC glues Brake fluids Antifreeze liquids Food coolants Washing solvents Cold bitumen solvents Hot bitumen solvents Contact Carisma for more information and to find out about the availability of the various products covered.
Request for a quoteCARISMA DI L. VIANO & C. SNC
Italy
Among the various types of solvents, glycols and chemical products marketed and distributed by Carisma of Turin, there are technical acids. Specifically, these are four different types of acids such as: Acetic acid 60% Acetic acid 85% Acetic acid 99% Formic acid For more information do not hesitate to contact the company.
Request for a quoteCARISMA DI L. VIANO & C. SNC
Italy
Since 1975 present in Europe with regenerated solvents and thinners, regenerated glycols and polyethylene glycols, solvents for bitumen, acids, end-of-season and non-standard products. We carry out filtrations, neutralizations, dehydrations and rectification of non-standard products. Our regenerates: acetone, acetic acid, formic acid, butyl acetate, ethyl acetate, isobutyl acetate, methyl acetate, methoxypropanol acetate, isobutanol, normalbutanol, sec-butanol, denatured isopropanol, methoxypropanol, methylene chloride, dichloropropane, chlorinated mixtures, dimethylformamide , dimethylacetamide, dibasic esters, butyl glycol, monoethylene glycol, diethylene glycol, triethylene glycol, dipropylene glycol, HCFC141b, MEK, MIBK, n-methyl-2-pyrrolidone, PEG 200, PEG 300, PEG 4000, perchlorethylene, polyols, naphtha solvent, denatured toluene, THF , trichlorethylene, denatured xylene.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CARISMA DI L. VIANO & C. SNC
Italy
Since 1975 present in Europe with regenerated solvents and thinners, regenerated glycols and polyethylene glycols, solvents for bitumen, acids, end-of-season and non-standard products. We carry out filtrations, neutralizations, dehydrations and rectification of non-standard products. Our regenerates: acetone, acetic acid, formic acid, butyl acetate, ethyl acetate, isobutyl acetate, methyl acetate, methoxypropanol acetate, isobutanol, normalbutanol, sec-butanol, denatured isopropanol, methoxypropanol, methylene chloride, dichloropropane, chlorinated mixtures, dimethylformamide , dimethylacetamide, dibasic esters, butyl glycol, monoethylene glycol, diethylene glycol, triethylene glycol, dipropylene glycol, HCFC141b, MEK, MIBK, n-methyl-2-pyrrolidone, PEG 200, PEG 300, PEG 4000, perchlorethylene, polyols, naphtha solvent, denatured toluene, THF , trichlorethylene, denatured xylene.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
The Steam Max series has been specially designed for professional cleaning. Steam Max and Steam Max Vacuum, with a professional dry saturated steam jet and extraction cleaning function, offers a cleaning system suitable for multiple applications. Steam Max combines technology and flexibility, and is equipped with a series of accessories designed for every need.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
Easy steam is a generator that works at 6 bar 165 ° C, designed for cleaning and sanitizing surfaces, equipment and environments. It differs from industrial models for its lightness and size. The accessories supplied allow a comfortable and manageable use of the machine, adapting to the different types of environment.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
Easy steam is a generator that works at 6 bar 165 ° C, designed for cleaning and sanitizing surfaces, equipment and environments. It differs from industrial models for its lightness and size. The accessories supplied allow a comfortable and manageable use of the machine, adapting to the different types of environment.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
Thanks to the sanitizing power of the MK2000 steam generator it is possible to clean surfaces, equipment and environments in an ecological way, avoiding the use of chemicals. Its powerful steam jet is effective wherever you need deep cleaning and a high level of hygiene. Thanks to its lightness and small size, MK2000 is perfect for all different types of environments.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
Thanks to the sanitizing power of the MK5 steam generator it is possible to clean surfaces, equipment and environments in an ecological way, avoiding the use of chemicals. Its powerful steam jet is effective wherever you need deep cleaning and a high level of hygiene. Thanks to its lightness and small size, MK5 is perfect for all different types of environments.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
Thanks to the sanitizing power of the MK4 steam generator it is possible to clean surfaces, equipment and environments in an ecological way, avoiding the use of chemicals. Its powerful steam jet is effective wherever you need deep cleaning and a high level of hygiene. Thanks to its lightness and small size, MK4 is perfect for all different types of environments.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
MK27 Process is a 30kW fixed steam generator that can be installed on a production line. It offers greater ease of use than mobile generators and is designed for complex cleaning cycles. It allows the delivery of dry steam at constant pressure during prolonged use, even 24 / 24h. It can be managed automatically by the customer's production line and combined with suction systems. It is possible to position it at a considerable distance from the place of use, for better integration in the spaces made available. It is simple to use and maintain. PRODUCT FEATURES 30 kW (27 lt boiler) Steam production from 15.6 to 39 kg / h Operating pressure 6 bar Steam temperature 165 ° C Horizontal boiler positioning
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
MK07 Process is a 12 kW stationary steam generator that can be installed on a production line. It offers greater ease of use than mobile generators and is designed for complex cleaning cycles. It allows the delivery of dry steam at constant pressure during prolonged use, even 24 / 24h. It can be managed automatically by the customer's production line and combined with suction systems. It is possible to position it at a considerable distance from the place of use, for better integration in the spaces made available. It is simple to use and maintain. PRODUCT FEATURES 12 kW (7 lt boiler) Steam production from 15.6 to 39 kg / h Operating pressure 6 bar Steam temperature 165 ° C Positioning the boiler horizontally
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
The cleaning and sanitizing activities with traditional methods can be replaced with the use of dry saturated steam, with a considerable advantage on the consumption of water and chemical agents. The Steam Masters are steam generators designed for cleaning and sanitizing surfaces, equipment and industrial environments.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
1 outlet at 10 bar with detergent delivery 1 outlet at 6 bar with detergent delivery 1 wet & dry vacuum cleaner Steamy is a 10 kW steam generator. It is equipped with one or two steam outlets and with a professional vacuum cleaner on request. The rear tanks can be connected to a water source for continuous steam production. Available in 7 different versions.
Request for a quoteGENERAL VAPEUR S.R.L.
Italy
1 outlet at 6 bar with detergent delivery Steamy is a 10 kW steam generator. The water tank on the back of Steamy can be connected with a continuos water supply for unlimited steam production.
Request for a quoteResults for
Generator - Import exportNumber of results
35 ProductsCountries
Company type