Coupling - Import export

Dynamic components for the construction of screw feeders suitable for conveying powder, grain and fibre products

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt.

Drum clamp to be installed on the forks of the forklift. The clamp is made of a sturdy steel frame and fork mounted with a forklift, the locking is ensured by two screws and a chain with safety catch that prevents the clamp from sliding off the forks. The coupling and release system of the drum is automatic and the operator must not get off the forklift. It is sufficient to bring the clamp close to the drum and lift. Closing of the clamp is favored by the weight of the drum; to unhook it, simply place the drum on the floor. The clamp cannot be used to handle empty drums. The clamp is suitable for 210 lt metal drums with a diameter of about mm. 580. The pliers can also lift plastic drums with edges but only of the type that can be seen in the picture.

Sealing Pliers designed for welding packaging of all sizes in the barrier material (polypropylene laminated paper and aluminum). Thanks to its small size and limited weight can be used anywhere. The pliers dual hot bar solder is available with a width mm. 300 and mm. 400 , furthermore the welds are repeatable side by side at any length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C using a temperature controller positioned on the plier. Thanks to the coated bars with antiadhesive teflon, it is also possible to weld polyethylene bags of high thickness. (Min 100 my each side - my 250 max each side)

PORTABLE CONSTANT HEAT SEALER – SUPER CELLO ( for multi-layer bags) T Clamp sealers suitable for the sealing of large packaging in barrier material (polypropylene, laminated paper and aluminum) and polyethylene. Thanks to the power cable of 4.5 meters you can move easily around the product to be packaged. The clamp sealer performs a dual hot jaws over a length of 42 cm. The sealers are repeatable, one beside the other, without length limits. The temperature of the sealing bars is adjustable from 60 ° C to 250 ° C by a thermoregulator positioned on the caliper. The longitudinally knurled bars and coated with an anti-adhesive treatment are also suitable for welding polypropylene.

double heating system with pre-heating that concurs to fuse with very low temperature respect to the standard temperature pressure system with “OUT” function for very delicate woven inside and outside belts cleaning devices carbon/graphite lower belt separation blade automatic turn ON and turn OFF by digital timer COUPLING, LAMINATION, TRANSFER, APPLICATIONS - COMPLETE LAMINATION LINE THAT CONCURS THE COUPLING OF 2 OR MORE LAYERS OF WOVEN WITH INTERLININGS, WEB GLUE OR FILM GLUE DIAGNOSTIC ON THE CONTROL PANEL introducion of the several rolls of wovens, interlinings, web glue or film glue by engine rolls perfect syncrony between fusing machine winding module and rewinding unit by inverter automatic cut machine availabilty for worked parts winding unit with vertical and horizontal control for a perfect alignment of the woven rolls during the winding fusing machine connected to the winding and rewinding module by inverter exit zone with rewinding unit equipped

The flexible joint mounted on the encoder shaft grants a very good coupling, without parallel and angular mis-alignment, and avoids overloads, which can damage the bushings life. Elap measuring wheels are fit for the use in touch with metal, steel profiles, varnished surfaces, plastic materials, paper, cardboard, wood, fabrics and leather; they offer an excellent resistance to oil, fuels, ozone and environmental agents.

Filler necks internal bayonet coupling passage diameter 30 mm, in steel or galvanized steel, to be screwed, welded or pressed on tank. They are available in different lengths and possibly equipped with vent / breather connection. In the following section you will find the most common versions of internal bayonet filler necks passage diameter 30 mm: for more details, please refer to the product’s technical sheet. This products shall be sold in combination with all our internal bayonet tank caps passage diameter 30 mm. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations.

PGE tank cap female threaded in aluminium, passage diameter 32 mm, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and it can be proposed in 3 standard colors (black, blue, red, green) for various needs in different sectors; on request we can also consider its realization in other special colors (for example gold color). This product can be also equipped with removable filter and it is compatible with our P3 filling system. PGE filling plug is mainly used on auxiliary water and hydraulic oil tanks. Thanks to its small dimensions and ergonomic design, it is also used on go-kart tanks or in fuel remote controlled model cars. The adoption of accurate production processes performed with latest generation CNC numerical control machines and the use of selected raw materials, are the first guarantee of quality and reliability over time of our product.

G3 fuel tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleansers, in stainless steel and galvanised steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the G3 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. It can be supplied, on request, equipped with safety chains or cables. This product shall be sold with our bayonet filling systems passage 40 mm.

690 tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleanser, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated. We can propose this product in a wide range of colors (black, gray, blue, red, green) for various needs in different sectors and, at your request, equipped with safety chains or cables. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments as well as for biodiesel and urea solutions tanks (AUS 32 (AdBlue®)). This product shall be sold with our bayonet filling systems passage Ø 40 mm or with our niches for connection to flexible fuel hose passage Ø 60 mm or with our complete filling systems, that we can customize in relation to your specific needs.

D.76 tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. We can propose this product in a wide range of colors (gray, blue, red, green, white) for various needs in different sectors and, at your request, equipped with safety chains or cables or lock protection door to protect it from dust, debris residues and rainwater. We supply this cap with variable or fixed code key or with the universal fixed code key 455: in this case, a single key allows to open all the components with keyed alike locking system, for example in a soundproofed cabin of power generator (cap with key, Pushbutton actuator with key, Handle with key, Selector switch activator key).

Realized in zinc-coated steel sheet with length of 100 mm. Thickness of sheet steel from 8/10 to 10/10 with Ø from 80 mm to 1000 mm. Available in plain, flanged and borded version. Product category DUCTWORK