Insulation panels - Import export

Polistop is a sandwich panel that integrates with the traditional structures made of two galvanized electrowelded mesh, joined by connectors, and a suitably shaped polystyrene (EPS) sheet; the sheet can have a variable thickness according to the architectural and insulation requirements. This precast insulating panel, subsequently completed on site, can be used for fast building and excellent insulation Infill walls of residential and commercial buildings; Infill of prefabricated industrial buildings or on site castings; Partition walls.

The double panel is made of two single sandwich panels, assembled leaving an intermediate crawl space of variable thickness depending on the type of building and the required wall resistance. These panels, prefabricated in the factory, are completed with concrete casting in the central crawl space the double panel could therefore be defined as a disposable, insulating formwork, whose thickness of polystyrene (EPS) sheets varies according to the insulation requirements. Externally, the double panel is completed using traditional plaster. This insulated precast panel is mainly used for main walls in structures completely built with insulating panels; main walls in structures with wooden roof or any other material.

The Single Panel is a sandwich panel made of two galvanized electrowelded mesh, joined by connectors and by an appropriately shaped polystyrene sheet (EPS) of variable thickness according to specific architectural and insulation requirements. This insulated precast panel, subsequently completed onsite, is used for Main walls in structures completely made with panels, compatibly with the structural inspections and technical standards; Main walls in structures with wooden roof or any other material; Partition walls; Infill walls of residential and commercial buildings; Infill of prefabricated industrial buildings or castings.

The floor panel is a sandwich panel used for floor and roof coverings, whose thickness varies according to the spans and the design loads. This prefab panel, prefabricated in the factory, is generally completed on site by placing concrete into the ribs and upper concrete casting a sort of a disposable, insulating formwork, whose thickness of polystyrene (EPS) varies according to the requirements of insulation and structural resistance. Alternatively, the reinforcement and casting can be done directly in the factory, as for the prefabricated concrete floors. These insulated precast panels are used for floors of structures completely made with panels; floors of buildings made with prefabricated structures, onsite castings or made with metal structure; floors of prefabricated modules.

Adhesive and scraper based on hydraulic binders for gluing and shaving inside and outside of polystyrene insulating panels, polystyrene (also embossed), polyurethane, cork, cement wood . Suitable also as a spur on concrete surfaces, rustic, plastic and/or mineral coatings, traditional or premised plasters based on lime and cement both new and old, even if painted provided that they be in an excellent State on plasters that have withdrawal injuries, with application in the first coat of Malvin net. Package: 25 kg sacks-70 sacks-17.50 QL footboards Usage: Indoor/outdoor Color: White/Grey Particle size: ≤ 0.6 mm Yield: As adhesive gluing points 2/3 kg/MQ/gluing at full surface 4/5 kg/MQ • As a spur 3/4 kg/MQ for two coats Vapour-passage resistance coefficient EN 1015-19: μ ≤ 10 Capillary water absorption EN 1015-18: Class "W1" Thermal conductivity EN 1745: λ10, dry, mat = 0.35 W/MK Flexibility: Excellent Certification: Tested according to ETAG 004

PNEUMATIC NAILERS FOR HEAVY STAPLES S29, section 2.10 x 1.80 mm, width 22.9 mm, length from 75 to 160 mm. USES: fixing insulation panels in the construction field. Available models: S29.130 model for staples with length from 65 to 130 mm. S29.160 model for staples with length from 65 to 160 mm.

Bearing walls in single sandwich panel Roof in single sandwich panel.

The software, designed by Schnell Home engineers, makes the production and installation of prefabricated sandwich panels much easier. The software works with AutoCAD and calculates the m² of insulating panels, the optional mesh , the quantities of materials and the necessary manpower hours; executes the production list by listing the number and dimensions of the different sandwich panels to be produced; produces the drawings to be used on site for the assembly and cutting of polystyrene panels (EPS); the cuts are calculated to optimize the production and minimize wastes.

Electromechanical automatic mesh cutting and bending machine for the production of U, L, Zshaped mesh and sandwich panels. Mesh handling is guaranteed by clamps driven by electric servomotors. Max mesh width 1250 mm; Max mesh length 6000 mm.

Robotic plant for the production of prefabricated sandwich panels made up of one or more assembling machines working side by side fed by a robot that loads the produced mesh and the polystyrene sheets that have already been cut. Once assembled, another robot placed at the end of the machine, unloads, stacks and binds the polystyrene panels to be used as main walls, partitions and infill walls of prefabricated and industrial buildings.

Machine for the assembly of the (EPS) polystyrene sheet shaped to two external electrowelded mesh. The assembling machine welds the vertical connectors to the two external mesh, producing the prefabricated sandwich panel. This way it is possible to produce all types of insulated panels single panels, double panels and floor panels of different thicknesses, ideal for the construction of residential, commercial and industrial buildings.

Mesh welding machine for the production of electro welded meshes supplied by bars and coils. This machine produces electro welded meshes with transversal wires prestraightened and cut to size and longitudinal wires supplied directly from coils. The mesh maximum width is equal to 1250 mm and the length is unlimited. These electrowelded mesh are used for the production of prefabricated sandwich panels.

Machine to cut (EPS) polystyrene blocks in sheets, useful for the production of precast sandwich panels. The machine cuts the blocks horizontally and vertically and obtains polystyrene sheets of different thicknesses and shapes.

Machine used to reinforce the polystyrene insert (EPS) of the Reinforced Thermal Block. The machine inserts automatically the vertical wires and their connectors into the polystyrene core.

The "Reinforced Thermal Block" is a new building block composed of two vibropressed concrete sheets separated by a suitably shaped (EPS) polystyrene core of variable thickness depending on the required insulation. The concrete sheets are joint by four galvanized steel connectors of Ø 23 mm, which make the block a single body. This insulating block may be used for Infill walls of residential and commercial buildings; Infill of prefabricated industrial buildings or on site castings

The stairs panel is made up of a suitably shaped polystyrene (EPS) sheet, wherein the riser and tread can vary according to the needs of the project. The polystyrene is covered by two electrowelded mesh joined by connectors. This prefabricated panel is reinforced and completed with concrete casting in the special ribs inside the EPS polystyrene.

These are specific materials for use in the thermoelectric sector and in thermo-mechanical applications. The range includes: Mica Continua Muscovite / Phlogopite is available in rigid or flexible sheets, tubes and / or shaped particles according to customer specifications. The main applications are in the following sectors: household appliances, packaging, lighting and electric heaters. Cementitious or calcium silicate based asbestos substitutes for all thermo-mechanical applications up to 1000 ° C Antistatic laminate to be used as a soldering template for printed circuits Misoglass1 / Deltherm1 have been designed to be used in all applications where thermal insulation is required under compressed conditions.

Details wall-mounted extraction with deflector profiles to increase filtering efficiency; easily removable for fast maintenance inside machine main structure formed by self-supporting galvanized panels with non-cutting edges lv control panel wired with flame-retardant cable atex lighting extractor with belt traction system high efficiency, antistatic, aluminum coated polyester filtering cartridges automatic compressed air filter cleaning system by detecting clogging of cartridges compressed air storage tank inside machine internal dust collection drawers deflectors inside machine to facilitate air conveying and dust collection in drawers Optional: dust extraction station with insulated paneling and, if necessary, wall-mounted filtration for air introduction

All standard tecno azzurra machines are ce marked and ready for use. Standard configuration: over-spray reduction system by wall or floor-mounted extraction structure made of thermal insulating and self-supporting insulated panels emergency door and sliding doors for entering/exiting pressurized system air emission chamber complete with viledon filter in oil bath control panel complete with all components necessary for correct operation of lv system. Timer for extraction of fumes before operator enters inside pressurized system atex lighting area for complete installation of air extraction unit pressurization unit complete with synthetic pre-filter, electric fan, support structure and manual shutter for regulating incoming air thermo-radiating unit integrated in pressurization unit and complete digital heat adjustment system All tecno azzurra systems can be designed and manufactured according to your specifications.

Our machines produce insulated and high resistant EPS panels for the building market.

The panels have standard dimensions with heights ranging from mm 1000/1 250/1 500 and lengths from mm 2950/3950; they can be made to be housed inside HE12O/1 40/1 60 profiles. The panel frame consists of horizontal and vertical beams with different insertion sections of mm 100 for HE 160 profile, mm 80 for HE 140 profile and mm 60 for HE 120 profile; The 20mm-thick rear side, representing the sound-insulating part of the barrier, consists of a battened or tongue&grooved matchboard. Inside the panel sound-absorbing material - mineral wool - with density 90 kg/mc, thickness 50 mm, supported by wooden pads to create an inner tube suitable to enhance the acoustic features: the sound-absorbing material is protected by a green or black smoke- and UV-resistant silicone net with 90% fine weft. The front face has slats for aesthetic/wool keeping purposes, which can be mounted diagonally, vertically or horizontally. An "EPDM" seal is fitted on the vertical sides of the panel front to lock