Automation - Import export

Panel control

CD3000S 1PH is a compact low cost family of solid state switches designd to replace contactors Single-phase thyristor units up to 90A. Applicable for resistive loads and infrared lamp. Zero crossing firing available with logic input signal (SSR) Constant current drain with SSR input Analog input 4÷20mA or 0÷10V with burst firing 4, 8 or 16 cycle at 50% power demand, is available as an option from 15A to 90A Heater break alarm (HB) to diagnostic partial or total load failure and short circuit on thyristor, is available as an option from 15A to 90A Side by side mounting Special design for heatsink with high dissipation IP20 protection Comply with EMC specification CE and cUL

CD3000S 3PH is a three leg switching three wire resistive load. General description Up to 90A. Applicable for resistive loads and infrared lamp. Fully isolated from power. Applicable for resistive loads. Zero crossing firing. Logic input signal SSR. Constant current drain. Side by side packaging. Special design for heatsink with high dissipation IP20 protection Comply with EMC specification CE and cUL

REVO S 2PH Thyristor Power Controller is suitable for resistive and medium or long wave infrared loads Current range – 30A, 35A, 40A, 60A, 75A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 450A, 500A, 600A, 700A, 800A Voltage range 480V, 600V and 690V (starting from 60A) Fully isolated from the power Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable) Logic input signal 4 to 30Vdc typical (SSR) plus 4-20mA or 0-10Vdc Linear input as an option Constant current drain, independent of supply voltage with SSR input Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option Side by side mounting Special design Heatsink with high dissipation value IP20 protection Complies with EMC, EAC, cULus® 508 Listed and cUL® listed up to 700A as an option. UL® listed for 800A as an option.

It is an high reliability Universal SCR Power Controller that has an advanced microprocessor that makes it universal and fully configurable via software. Particular attention has been gived to the Connectivity with the most popular Field Bus and to the unit management via Wi-Fi (optional) and CD Automation Smartphone APP. REVO Connect is fully Software configurable. Current Rating 30 to 2100A for 3 Phase unit. Voltage Range 480V, 600V and 690V. CE-EMC Listed, EAC Listed, cUL 508 Listed up to 700A, UL Listed from 800A to 2100A. Universal Input: The std analog inputs 4:20mA and 0:10V and SSR Configurable via Software. All types of firing mode Half Cycle, Single Cycle, Burst Firing, Delayed Triggering Phase Angle and Soft Start. OLED display on front Unit: This display give better operator interface and delivers use-friendly intuitive messages. Universal Control Mode: Current, Voltage, Power, Open Loop. High precision measurement (True RMS Value for V,I and VxI) ≤1%

The REVO PC unit is designed to handle applications with many zones. This enhanced unit, thanks to a particular algorithm, minimize your energy costs through the sync function and the power limit for each zone. Benefits include:Each loop’s process information is managed independently, Calculation of instant current and RMS Voltage, Current and Power Calculation of load resistance with Heater Break Alarm Modbus Master, Modbus slave, Profilbus DP, ProfiNet, Modbus/TCP, Ethernet IP and other Elimination of power overshoot (see video) Power factor close to one due to zero crossing firing REVO-PC keeps your instantaneous power within the limit of your electricity supply contract Prevents increases in energy supply tariffs imposed by your electricity supplier Quick return on your investment. Mishandling the Use of Power Results in Higher cost and Expensive Penalties for Exceeding the Contractual limits.

The REVO PN unit is designed to handle applications with multiple zones. This enhanced unit, thanks to a particular algorithm, minimizes your energy costs through the synchronization and the power limit for each zone. Revo PN keeps your instantaneous power within the limits of your electricity supply contract. This product meets modern connectivity needs REVO PN responds to the modern need for connectivity, data acquisition, monitoring and diagnostics of industrial plants through the most widely used field bus systems.It’s the ideal complement to your PLC / MULTILOOP for improved power control. EACH ZONE INCLUDE: • Power managements • Current Measurements in True Effective Value • Power measurements • Voltage measurements • Load resistance measurement • Communication • Thyristor Units with high I2T • Synchronizing Circuit • 480V Max Voltage • Digital Input and Relay Output • Integrated Extra Rapid fuse

REVO C is an high reliability Universal SCR Power Controller that has an advanced microprocessor that makes it universal and fully configurable via software. Particular attention has been gived to the Connectivity with the most popular Field Bus and to the unit management via Wi-Fi (optional) and CD Automation Smartphone APP. REVO Connect is fully Software configurable. Current Rating 30 to 2100A for 1 Phase unit. Voltage Range 480V, 600V and 690V. CE-EMC Listed, EAC Listed, cUL 508 Listed up to 700A, UL listed from 800A to 2100A. Universal Input: The std analog inputs 4:20mA and 0:10V and SSR Configurable via Software. All types of firing mode Half Cycle, Single Cycle, Burst Firing, Delayed Triggering Phase Angle and Soft Start. OLED display on front Unit: This display give better operator interface and delivers use-friendly intuitive messages. Universal Control Mode: Current, Voltage, Power, Open Loop.High precision measurement (True RMS Value for V,I and VxI) ≤1%

It is an high reliability Universal SCR Power Controller that has an advanced microprocessor that makes it universal and fully configurable via software. Particular attention has been gived to the Connectivity with the most popular Field Bus and to the unit management via Wi-Fi (optional) and CD Automation Smartphone APP. REVO Connect is fully Software configurable. Current Rating 30 to 2100A for 2 Phase unit. Voltage Range 480V, 600V and 690V. CE-EMC Listed, EAC Listed, cUL 508 Listed up to 700A, UL listed from 800A to 2100A. Universal Input: The std analog inputs 4:20mA and 0:10V and SSR Configurable via Software. All types of firing mode Half Cycle, Single Cycle, Burst Firing, Delayed Triggering Phase Angle and Soft Start. OLED display on front Unit: This display give better operator interface and delivers use-friendly intuitive messages. Universal Control Mode: Current, Voltage, Power, Open Loop.

REVEX is a real Universal Unit where you can select: • Input signal in digital mode, no link jumpers inside • Firing mode: Burst Firing, Zero Crossing • Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI • Communication RS485 with Modbus® protocol std. • Two Analog input • Two Digital input • USB port to program REVEX, should you ever need to re-program from your ordered configuration • With the units already programmed you can simply switch On and Go • Save money and time straight out the box without the need to read a long manual • Save money with REVEX and only pay for functionality you need

REVEX is a real Universal Unit where you can select: • Input signal in digital mode, no link jumpers inside • Firing mode: Burst Firing, Zero Crossing • Voltage, Current and Power or V2 and I2 • Communication RS485 with Modbus® protocol std. • Two Analog input • Two Digital input • USB port to program REVEX, should you ever need to re-program from your ordered configuration • With the units already programmed you can simply switch On and Go • Save money and time straight out the box without the need to read a long manual • Save money with REVEX and only pay for functionality you need

REVEX is a real Universal Unit where you can select: • Input signal in digital mode, no link jumpers inside • Firing mode: Single cycle, Half cycle, Burst, Phase Angle, Delayed Triggering, different types of adjustable ramp • Control Mode (V, V2, I, I2, VxI) • Communication RS485 with Modbus® protocol std. • Two Analog input • Two Digital input • USB port to program REVEX, should you ever need to re-program from your ordered configuration • With the units already programmed you can simply switch On and Go • Save money and time straight out the box without the need to read a long manual • Save money with REVEX and only pay for functionality you need

SCR Power Controller Unit suitable for resistive and medium or long wave infrared loads Current range – 30A, 35A, 40A, 60A, 75A, 90A, 120A, 150A, 180A, 210A, 300A, 350A, 400A, 450A, 500A, 800A Voltage Range 480V, 600V and 690V (starting from 60A) Fully isolated from the power Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable) Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option Constant current drain, independent of supply voltage with SSR input Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option Side by side mounting Special design Heatsink with high dissipation value IP20 protection Complies with EMC, EAC, cULus® 508 listed and cUL® listed up to 500A as an option. UL® for 800A as an option.

REVO S 1PH Thyristor Power Controller is suitable for resistive and medium or long wave infrared loads Current range – 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 500A, 600A, 700A, 800A Voltage range 480V, 600V and 690V (stating from 60A) Fully isolated from the power Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable) Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option Constant current drain, independent of supply voltage with SSR input Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option Side by side mounting Special design Heatsink with high dissipation value IP20 protection Complies with EMC, EAC, cULus® 508 and cUL® us listed up to 700A as an option. UL® listed for 800A units. Can be used in conjunction with REVO-PC to provide multi-zone control

CD3000S 2PH two leg switching three wire load star or delta resistive loads or infrared lamps up to 90A. Fully isolated from power. Zero crossing firing available with logic input signal (SSR) Constant current drain with SSR input Analog input 4÷20mA or 0÷10V with burst firing 4, 8 or 16 cycle at 50% power demand, is available as an option from 35A to 90A. Heater break alarm (HB) to diagnostic partial or total load failure and short circuit on thyristor, is available as an option from 35A to 90A Side by side mounting. Special design for heatsink with high dissipation Comply with EMC specification CE and cUL

REVEX PA is the latest born in the REVEX family. The REVEX are positioned between the two families REVO S and REVO C in terms of price and performance. The main characteristic is that they can be configured according to your needs by eliminating of all options that you do not want to use, in order to reduce the purchase price. It is an extremely flexible and performing unit. The REVEX PA is a three-phase unit with higher functions compare to the other REVEX 3PH models, because it is able to carry out phase angle firing with or without Current Limit. REVEX PA is therefore a unit suitable for driving inductive loads, such as three-phase transformers. The algorithms inside the unit allow the control of the power even for special loads, such as MoSi2 and SiC heating elements. It is suitable for controlling both normal resistive loads and short, medium or long wave infrared lamps.

REVO PB allows you to reduce the costs of electricity in industrial thermal processes. REVO PB is able to optimize your industrial electric heating systems and make your production processes more flexible. With traditional heating systems based on resistors and multi-zone power controllers, when you turn on the load you have a great impact on the peak absorption and when you modulate the load to keep the temperature constant you introduce a lot of disturbances into the electrical network. This leads to possible malfunctions of the electronic control and penal systems by the energy supplier. REVO PB power controllers are among the latest in the REVO family expanding REVO PN Family up to 90 A per channel. This is the ideal unit in cases where it is necessary to control and optimize the power. Its optimization algorithm, like an orchestra conductor, distributes the required power of the individual zones while keeping the total power absorbed on the line as constant as possible.

The REVO RT is a compact power controller unit, which integrates inside a single phase static group for each loop for control of the electrical power. Each unit manages 3 independent control loops. The unit can be purchased with the diagnostic functions for the load and for the SCRs. In this case there is a amperometric transformer for each channel. Each power channel is always equipped with extra rapid fuses . The power inside the unit, current transformer and extra rapid fuses in a single unit save a considerable space inside the panel and time for wiring . Available in the following currents: 35, 50, 75 and 90A with maximum voltages 480V and 600V.

Metallizing gun of all wires to be used with robot

Automated arc spray equipment of all metal wires

With timeliness and professionalism we provide assembly and maintenance services for electrical systems. Our qualified, up-to-date engineers are available to design, manufacture and adjust any kind of electricity system, from residential and civil systems to industrial ones. The company offers: Design and construction of electrical systems for industrial machines and production lines. Design and construction of civil electrical installations Production of subcontracted electrical systems Civil and industrial electrical systems maintenance Video surveillance Anti-theft systems Gate automation Home automation systems Lighting

We design, manufacture and install customized solutions for industrial handling, automation and logistics systems. Our products cover the needs of different industries, everything from automotives and metalworking through to the rubber industry and from the food industry to agriculture, mining and large-scale retailing. Experience and knowledge of our technology allow us to offer services which are especially related to the development of handling for the servicing of machinery used in mass production.

The COMPACT automated gold bars production plant includes the latest technological developments and the experience of over 100 installations in a small automatic unit. The automated vacuum-transferring system loads the grains inside the hopper and the COMPACT plant provide the finished ingots directly to the output area. DETAILS: Fully automatic Ultra-compact, ultra-precise and ultra-fast weighing machine; Angular Cooling zone to reduce the total footprint; Inductor electromagnetic shielding according to CE regulation; Industry 4.0 Ready

AIC – Automazioni Industriali Capitanio is a global system integrator providing advanced and tailored automation and robotic solutions for the steel industry, with the aim to continuously improve both efficiency, competitiveness and safety of the production processes. With more than 1000 applications worldwide and more than 40 years of history, AIC can boost an unique experience in both greenfield and revamping projects in meltshops, continuous casting machines and long products rolling mills. Thanks to the team of over 70 highly skilled professionals, the company designs, manufactures and commissions turn-key electrical, automation, PLC safety systems and robotic applications, ensuring long-time experience and technical know-how for engineering, AC and DC drives, PLC and SCADA for complete Levels 0, 1 and 2 automation and process control that are the critical issues of Mini Mills. For more information please visit the website www.aicnet.it or send us an email at aic@aicnet.

Automazioni Industriali Capitanio (AIC). AUTOMATIC TAGGING ISLAND is a solution for automatically tagging bundles of profiles, sections and rebars in long product rolling mills. Advantages: - 3D scanning time - 1.2 sec - Full tagging cycle time - 8 sec - Production capacity is up to 180 tph Main Benefits: - Incresed safety and productivity - Efficient and consistent equipment utilization - Cost reduction - Fully finished product tracking system - Tag charger can handle more than 10000 tags Contact us! Tel: +39 0365 826333 Web: http://www.aicnet.it/contacts.html

Platinum TT is the evolution of the modern induction brazing, this platform can be set up with 4 different stations to: flux, apply brazing paste, cool the parts, mark with galvo laser technology. This system will for sure adapt to all your process and needs. You can use all models of the Platinum series ranging from 2,5KW HF to 25KW MF. The intuitive control system perfectly fit with Seit Elettronica software philosophy: “We provide innovative industrial products with a simple and modern user interface.” These characteristics are pairing and expanding all the new functionalities of “Platinum App” to collect, compare, store and control all the keys datas from Your production cycle time and more.

Ekinex® proposes a KNX binary input and a 6 channel pushbutton interface. The binary input is an S-mode modular KNX device for panel mounting, used for the connection to the bus of traditional (i.e. not natively communicating on KNX bus) commands and sensors equipped with dry contacts. The pushbutton interface, besides being used as input, can also be used as an output line, with the specific purpose of controlling high efficiency indication LEDs.

Ekinex® delégo is a supervision system which allows to control and monitor a domotic plant using a mobile device (smartphone and tablets) equipped with Apple iOS or Android operating system. The supervision system is based on a dedicated hardware platform running a simple and intuitive configuration web interface. Through this interface it is possible to perform the plant’s setup in few steps, by directly importing the ETS project of the domotic plant: in this way, once the import phase is completed, the user can start to control and monitor all the domotic functions of the delégo application.

The Ekinex® gateways are modular KNX devices for panel mounting. The Gateway range includes: Modbus, which are devices that allow an exchange of information between one or more slave devices communicating on a RS485 differential serial network or by Ethernet through Modbus protocol; BACnet, which allow an exchange of information with a master device communicating on a RS485 differential serial network or by Ethernet through BACnet protocol; DMX, which allow an exchange of information between one or more slave devices communicating on a RS485 differential serial network or by Ethernet through DMX protocol; M-bus, which allow an exchange of information between one or more slave devices communicating through M-bus protocol; Profinet, which allow an exchange of information with a master device communicating by Ethernet through Profinet protocol; DALI, which allow an exchange of information between one or more slave devices communicating through DALI protocol.