It direct - Import export

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house. They work on the thermal store principle of storing central heating water and providing mains fed hot water via a powerful coil for power showering and quick bath filling. The coil is not pumped. The thermal store acts as a buffer for fast radiator heat up and boiler efficiency. The direct pattern cylinder (TSDC) without the integrated feed and expansion tank has to be fed with a remote F and E tank sited above the highest point of the radiator circuit. You need two pumps - one for the boiler to keep the store hot - controlled by the thermostat on the store, and one for the heating circuit - controlled by the room thermostat and heating programmer. These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, solid fuel or biomass(except Heat Pumps) are suitable for average to larger properties

SINGLE AND DOUBLE PE CONTAINMENT TANKS FOR 1000 LT TANKS. - DIRECT LOAD Direct load containment tanks made of sturdy polyethylene, very resistant and light. They are suitable for the safe storage and emptying of 1000 liter tanks. In the models with direct loading, the grid or pallet supporting the tank are replaced by the presence of special lateral supports which make the product particularly robust. The tanks are resistant to most acids, bases and oils. The standard color is blue. FPDC1 1000 PE direct charge single tank with load 1500 kg. - suitable for a 1000 l tank. FPDC2 1000 PE direct charge double tank with load 2500 kg. - suitable for two 1000 l tanks. side by side.

XRUST of Cosmochrome is an ideal gloss paint, that is applied directly on corroded metallic surfaces, with no need of anti-corrosive primer. It’s easy and effective solution against corrosion. Protects new or old metallic surfaces from corrosion and provides an attractive finish with long temp gloss and color retention. It dries quickly and has strong adhesion. Surfaces must be clean from all defective and raw materials, such as loose paints, rusted pieces, salts and grease. All difficult paints and corners must be covered, so no moisture allow to penetrate.

Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ASP’s. 1.5 – 30kw Drive Motors 2 + 4-Pole + Dual Speed, Direct Drives Submersible Motor – IP 68 protection AISI 304 / 316 or special SS

Bladed Horizontal surface aerator suitable for circular, racetrack or rectangular channel. Designed to be maximise oxygen and flow. Use of high-quality materials of construction together with mechanical gear driven equipment. Reliable equipment with extremely long service life. COMPONENTS Brush bridge shaft with anti-corrosion paint Galvanised Steel brush blades or stainless steel Side protection discs Bearings Vertical geared motor with high energy class IE3 enclosure and eciencies Horizontal geared motor with energy class IE3 enclosure and eciencies Geared motor support bracket Upstream and/or downstream rotor cover Automatic grease cartridge Operator safety features on and upstream of the brush aerator

Multi-purpose, multi-directional, submerged mixer ideal for general mixing and flow generation; adaptable to many tank configurations. Open, dual helical impeller providing intensive; directional sub-surface mixing pattern with minimal surface disturbance and low power to volume performance 1.5 – 22KW Drive Motors 4 + 6-Pole Speeds, Direct Drive AISI 304/316 or other SS Submersible motor – ip 68 protection High quality, low maintenance motor Robust + compact design – minimal vibration Easy installation + removal Directional mixing + flow generation plus general mixing of lagoons Basins + tanks activated sludge processes vey large surface area reservoirs Denitrification + sbr + asp

The IST AG FS2 flow sensors are applicable in gas and offer excellent long-term stability. In addition to measuring flow rates, the FS2 gas flow sensor is able to detect flow direction with outstanding sensitivity. Further advantages of the FS2 thermal mass flow sensor include: — Simple signal processing — Simple calibration — Bare sensor resists up to +450 °C (customer specific) — Stable platinum technology — Excellent reproducibility — No moving mechanical parts — Customer-specific sensor available upon request The IST AG FS2 flow sensors are optimal for measuring gas flow and direction.

- Simple automation directly using the control system without software and/or PC - Operation with limit switch or via power consumption - Left/right operation and speed control directly on the housing - Option for external switches/joysticks - Various modes of operation, such as tip operation and start to finish (semi-automatic) - Various adjustable acceleration ramps - Power supply via 24V/2.5A

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

UV digital printing on souvenir is a unique solution for high-quality printing on different surfaces as well as other applications for advertising miniature text, bright and solid colors. Direct printing is a technology where the print is happening directly from the client's file over the objects. The ink is transferred directly onto different surfaces such as plexiglass, glass, plastics, papers, self-adhesive film, PVC film, comatex, veralit, leather, textile, canvas, wood, ceramics and metal. The bigest advantage of this technology is the multicolor printing on small quantities, personalisation and advantage over dark surfaces and mirror printing over transperеnt materials.

The IKO Crossed Roller Way Unit consists of a Crossed Roller Way (CRW) mounted to a highly rigid table and bed. It performs smooth, limited linear motion with low elastic deformation and high rigidity. It can handle loads in every direction and is available in various sizes that can be selected according to the application.

IKO Linear Way F is a linear motion rolling guide with a highly rigid slide unit that performs endless linear motion over a wide track rail. Two rows of steel balls contact the raceway at four points with a high number of loadbearing balls. This enables stable high accuracy and rigidity even in applications where load has variable direction and size or complex load is applied. Since it is wide, it is also resistant to moment load in the width direction, so it is suitable for single row use as well.

φ0.8m 45°/ 90°arc, thousands of styles come from the connections of lines and arcs 20m flexible diffuser making it easy for installation without connections for over length application, no light leakage Various installation ways: pendant, recessed and surface mounted

Unidirectional ( UD ) fabric is one in which main, long, structural fibers are oriented in one direction, held in place by secondary nonstructural stitching threads. Structural orientation can be in 0 or 90”. Unidirectional fabrics are offering the ability to place fibres in the component exactly where it is required and in the optimum quantity.

Unidirectional ( UD ) fabric is one in which main, long, structural fibers are oriented in one direction, held in place by secondary nonstructural stitching threads. Structural orientation can be in 0 or 90”. Unidirectional fabrics are offering the ability to place fibres in the component exactly where it is required and in the optimum quantity.

"All our motors have a square frame with a compact and robust construction. A modular design allows a wide flexibility of assembly forms. The motors have a laminated housing, which allows high currents in transit. An insulation system with a higher class than F guarantees a longer life of the motors. They are suitable for a wide range of applications. The motors comply with the international requirements 34-1. The following conditions apply: continuous duty S1 and a DC power supply fully controlled by the drive. Features: - Depending on the application, the motors can be equipped with IC0666 air exchanger or ICW81 air water exchanger. - Predisposition for encoder or tachometric dynamo mounting 20 or 40 or 60V/1000T - On request, the motors can be built to measure to go in place of the existing motors - IP23 protection - Heating class F - In 12-24-48-220-440V - Cast iron - Up to 800kW - B3/ B35/ B5 - Insulation class H - Cooling IC06 - 100 - 355 size"

Metro anti-skateboard construction metal products

# Description Taihan Fiberoptics' multi-purpose loose tube cables are designed for outdoor applications to be used in Duct, Lashed or Direct Buried(Armoured) installation. Out Loose Tube designs are composed by flexible gel free fully water-blocked buffer tubes in a SZ stranded cable core facilitating handling, preparation and cable mid-span entry. Optional armoured type with corrugated steel tape provides mechanical protection and rodent resistance. # Features - Water Proof (Long product life) - Quick Identification (Color coded Fiber) - Durable Design (UV resistance) - All Dielectric (No effect to electric lines) - Easy to handle (Flexible & Light weight) - Excellent Flexibility (Easy to install) - Cost Saving (Fast Splicing) - Eco Friendly (Gel free material) - Easy Preparation ( All dry block) # Products - MT Single Jacket Non Armoured - MT Single Jacket Single Armoured - MT Double Jacket Non Armoured - MT Double Jacket Single Armoured

"We also offer used engines directly from our stock. These motors are a fast and efficient solution which allows us to help you out by offering short delays for sale or rent with or without purchase option and this at an extremely interesting price. These motors with cages, rings or direct current are revised and tested in our workshops to ensure you an optimal service. They are delivered with a 12 months warranty. Our stock offers used motors with power ranging from 15kW to 5MW. Characteristics: - From 15kW to 5MW - With or without purchase option - 12 months warranty"

Rentaload offers the rental of direct current load banks, allowing the reliability of a battery to be tested. Testing using load banks validates the operational performance and battery life of a system. It tests the inverter and generator under load conditions. Indeed, these tests, most often performed during preventive maintenance, can determine the condition of the inverter’s batteries and battery packs (or “strings”) and indicate whether individual cells are in good condition or approaching end of life and must be replaced. The load bank test will ensure that the backup system batteries will work together as expected when called upon to support a critical load.

"The demand for speed control has taken off with the advent of IGBTs and powerful microprocessors. Today, there is no longer any difference between DC and AC. 99% of new installations will be equipped with variable speed AC solutions. In our product range, we have both DC and static frequency inverters. Characteristics of a DC drive: - Three-phase power supply between 200 and 690V - Digital inverter - 2 and 4Q solution - Power between 2.4kW and 3.2MW - IP20 protection - Modular drive for cabinet mounting - We have a stock only in 4Q up to 900A"

It is mainly used to replace R22 and R502 refrigerants in low-temperature refrigeration equipment; because R290 refrigerant is flammable, it is usually only used in low-temperature refrigeration equipment with a small amount of liquid, or as a component of low-temperature mixed refrigerant; R290 is compatible with traditional refrigeration oil. High-purity R290 is used as a temperature-sensing working fluid; premium and first-grade R290 can be used as a refrigerant to replace R22, R502, compatible with the original system and lubricating oil, and used for central air conditioning, heat pump air conditioning, household air conditioning and other small refrigeration equipment . R290 is a hydrocarbon refrigerant; it has no damage to the ozone layer and has a very small greenhouse effect.

1.R32 refrigerant gas is an important mixture component of R410A and R407C 2. R32 is used for air-conditioning R32 molecular formula: CH2F2 Difluoromethane(1,1-Difluoromethane) UN Number: 3252 Risk grades: 2.1