Integral switches - Import export

Gigabit Ethernet PoE Switch can transmit huge data into backbone of high power servers in security topology. For the low delay and high integrity protection, the PoE switch supports high performance of Store and Forward With the intelligent address recognition algorithm. The Switch recognize architecture eliminates unnecessary traffic and solve the critical network congestion. Different Mac Address enables the filtering of complete transmission speed. • 10/100/1000Mbps TP 8 Ports (802.3at PoE) + 100/1000/2.5Gbps SFP 2 Slots • Web based Management, Telnet, SSH, SNMP, RMON, Syslog • Auto MDI/MDI-X for UTP • Auto Scan Manager Program(Scan, IP Setting) • S-Ring(Recovery time <10ms), Dual-Ring, ERPS • PMC support(IGMP/MLD) • Max. PoE Output Power budget: 30W/port, 240W(total) • Switch Fabric 26Gbps • DIN-Rail, Panel mounting • Power Input: DC24~56V • Dimension: W61 x D110 x H157(mm), Aluminum Case, IP30 • Operating Temperature - Operation: -40℃~70℃ - POE full load : 40°C~50°C

Switch probes are contact probes with integrated switch function, that opens or closes after a certain travel. This is very useful for testing the presence or exact position of a component or a connector element.

Incremental, digital interface, resolution 0.2 μm, with final position detection Profile MSK1100: Max. resolution 0.2 μm Repeat accuracy max. ±1 μm ≤0.4 mm reading distance Status LED display Robust metal housing two integrated limit switches, lateral scanning

The leakage sensor enables a realiable detection of water or other conductive media in seconds. The leakage sensor can be easily integrated into switching modules and systems via its RJ12 connector.

EH 25-H JDN Hydraulic Monorail Hoists Carrying capacities: 20 t up to 100 t Our hydraulic hoists can be deployed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systems or hydraulic aggregates are existent. Standard Features predestined for application in explosion-endangered areas (Explosion protection) super-silent encapsuled and robust gear motor integrated overload switch-off only two supply connections at hoist “P” and “T”, leakage oil drained internally

PROFI 6 TI-H JDN Hydraulic Hoists PROFI Carrying capacities: 3 t up to 100 t Our hydraulic hoists can be deployed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systems or hydraulic aggregates are existent. Standard Features predestined for application in explosion-endangered areas (Explosion protection) super-silent encapsuled and robust gear motor integrated overload switch-off only two supply connections at hoist “P” and “T”, leakage oil drained internally

Electric cylinders are self-locking. So they do not need energy when they stand still. This makes the electric cylinders to be an interesting alternative to pneumatic and hydraulic actuators. Powerful DC motors, signal lines, potentiometers and Hall-ICs for position indication, as well as integrated end switches uncomplicatedly serve for meeting the most frequent requirements.

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

Desiccant dehumidifier TTR 200 The lightweight under the high-quality dehumidifiers: the extremely compact and mobile TTR 200 The TTR 200 is an extremely compact and lightweight quality dehumidifier for keeping room air continuously dry or for drying during water damage restoration. All TTR 200 are equipped with the advanced electronic Monoventic air volume regulation which allows stepless, demand-oriented regulation of the required dry air volume. Dehumidification performance and thus power consumption as well as noise emission of the TTR 200 can therefore be defined as required at any time. Even the standard model has an integrated DIN socket for remote switching to control the TTR 200 by means of an optional hygrostat, time clock or other external switching devices with matching DIN plug.

2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with integrated positioning control. Note: Stepper motor with integrated positioning control. It forms a convenient unit consisting of stepper motor and intelligent controller. Reference travel is possible on a block with reduced electric current without proximity switch. Integrated rotational monitoring. Smooth running through dynamic switching of increment trip. Actuation via single I/O interface, 31 position configurations and call-ups. Control unit can be parametrised quickly and conveniently with the software. The software and manual for programming the positioning control are available as free download. When selecting a suitable motor, using just the retaining torque is not enough, as the motor’s torque decreases with the speed. It is therefore essential to select the correct motor according to the torque curve.

DIESELFIxx 60 l/min-230 V 50 Hz-EUS-EBZM-ZVABD-4 m specification Vane pump with integrated bypass (23 430) Switching on and off by removing the nozzle Hydraulic siphon protection according to WHG (Water Resources Act), permanent effective Flow counter NUMERIxx³, three-digit (23 192) Automatic nozzle with type approval and swivel joint, ZVABD (23 168) Dispensing hose, 4 m, DN 19, G 1" a, G 1" i (23 155 957) Foot valve with suction strainer (19 890) Fassverschraubung, G 2" a, G 1" a Intake hose required according to assembly: 1,6 m (23 156) 2,0 m (23 158 959) 4,0 m (23 155 950) 6,0 m (23 155 956) Packed in a box

PROFESSIONAL COMPLETELY ELECTRICAL LIFTERS SERIES FPLX PRO The price shown includes 1 traction battery 24V-225 Ah and high-frequency charger for traction battery 24V-225 Ah. The FPLX series is the next series of robust and professional stackers suitable for high utilization during the working day. In fact they have 6 hours autonomy. Characterized by high quality, are equipped with electric feed and lifting. High maneuverability: flexible and easy to use, the new model has a lateral dimensions reduced to 800mm. The wheels position is always within the width of the vehicle allows to handle goods in narrow spaces and corridors. Quick and easy battery maintenance thanks to the new opening with ABS cover. Accurate control system and integrated with safety switch and battery status indicator. Ergonomic rudder.

Calibrate and adjust mechanical yarn brakes for the textile industry The test specimen is inserted in the UUT, which is mounted on a pneumatic slide. By pressing a button, the candidate moves to the running belt drive. The sample is then tested in different locking positions, the switching of the individual Paramtersätze is realized via a rotary switch. In each latching position, IO / NIO statement about the GMV2 light mounted on the column is displayed visually. After passing the examination, the tray will open again and the next candidate can be inserted. A speed controller as well as an ON / OFF switch for the drive are also integrated in the switch box under the GMV2. The entire inspection unit is mobile and complained to a height-adjustable lifting unit. The GMV2 and connect the switch are also mounted height adjustable in the profiles.

Technical information The SC 03 is an electropneumatic crimp press. It is equipped with a very efficient pedal switch. The correct and fully controlled sequence is monitored by a microprocessor control. The machine is started by a foot-switch. An integrated adjusting mechanism enables a correction of the crimping depth. Crimping tools can be changed easily and are available for the processing of ferrules with a size of up to 70 mm² with different crimping lengths. On customers demand special tools with different crimping geometries can be developed and manufactured.

HGL offers tailor-made PC solutions that have been specially developed to form a holistic measurement system in combination with HGL amplifiers. The PCs offer sufficient power reserves and storage capacity to operate several measuring devices in parallel on one computer and are compact in design. The compatibility with the existing measurement hardware was tested in numerous test series. Different form factors offer different ways to accommodate the computer hardware. In the 19" format, installation in measuring cabinets is no problem. Other form factors offer the option of mounting the PC directly to the back of a monitor. Network switches integrated into the PC hardware provide additional flexibility and clarity when setting up and operating complex measurement systems.

Sensors of the family IGEX22 for use in zone 22 with integrated electronics and direct switching output to the non-explosive area do not need a separate analysis device. This saves space and costs. The EGE IGEX20 proximity switches are based on the conventional inductive principle and switch when a metallic object moves close. This family includes shock and vibration resistant solid stainless steel sensors. The sensors are certified according to ATEX and IECEx. The sensors of this family are suited in the area of explosive dust atmospheres (zone 22) for presence verification, position and movement monitoring and the counting of metallic objects and the speed control on conveyor belts.

Impressive development of the SHS series is assured with the design of the SHS3 switch. Having to replace the safety hinge switch whenever the equipment is bumped or damaged due to mechanical stress is unnecessary thanks to the solution offered by the SHS series. The hinge setting can be corrected even after the switching point is set. This process can be done with the assistance of the integrated adjustment system. The hinge switch is also reusable even when the system itself needs to be converted. Thanks to change kits, the operator can redefine the switching point without compromising the IP 67 protection rating.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

1 U chassis with 17" TFT display, English or German keyboard layout, with telescopic slides. Max. power consumption in operation, without optional KVM switch: 32 W; Max. power consumption when closed, without optional KVM switch: < 1 W. DK Monitor/keyboard unit, WHD: 482.6 mm (19")x1 Ux680 mm, 100-240 V, 1~, 50/60 Hz, german, RAL 7035

USBflex Extender over IP is the active extension for USB 2.0 high speed signals and has a range of 150m/492 ft. in copper as single version available. The in-house developed transparent USB 2.0 interface supports supports USB devices like tablets, touch sceens, sound modules, printers, USB sticks and USB hard drives. The kvm-tec „USB save“ function prevents virus intrusion via the USB interface by disabling mass storage devices. The USBflex Extender can be integrated into a matrix switching system up to 1000 endpoints in conjunction with a standard network switch. With the included Switching Manager software, convenient and intuitive management of KVM extenders in the switching system is possible

With digital Master-Slave function, overload protection and interference filter. Protection for your appliance from malfunctions in the mains, such as surges, indirect lightning strikes or circuit noises, with a maximum sum of leakage current of up to 30.000 A. Top quality protection against HF interference by means of an integrated filter. With the switching ON/OFF of the device, which is plugged into the red master socket, all further appliances in the slave socket can also be automatically switched ON/OFF. For example, you can use a computer as a master device, which can embrace slave appliances in the automatic control such as, e.g. monitor, sound-system, printer, scanner etc. Meets the high standards for the environmental safety symbol "The Blue Angel" - minimizes standby losses - low energy consumption - avoids materials that pollute the environment. Digital: Saves the correct setting for your master unit at the push of a button. Modern: Switches your slave unit safe and...

With digital Master-Slave function, overload protection and interference filter. Protection for your appliance from malfunctions in the mains, such as surges, indirect lightning strikes or circuit noises, with a maximum sum of leakage current of up to 30.000 A. Top quality protection against HF interference by means of an integrated filter. With the switching ON/OFF of the device, which is plugged into the red master socket, all further appliances in the slave socket can also be automatically switched ON/OFF. For example, you can use a computer as a master device, which can embrace slave appliances in the automatic control such as, e.g. monitor, sound-system, printer, scanner etc. Meets the high standards for the environmental safety symbol "The Blue Angel" - minimizes standby losses - low energy consumption - avoids materials that pollute the environment. Digital: Saves the correct setting for your master unit at the push of a button. Modern: Switches your slave unit safe and...

With digital Master-Slave function, overload protection and interference filter. Protection for your appliance from malfunctions in the mains, such as surges, indirect lightning strikes or circuit noises, with a maximum sum of leakage current of up to 120.000 A. Added protection against interference pulses via telephone, ISDN/DSL or aerial ports. Top quality protection against HF interference by means of an integrated filter. With the switching ON/OFF of the device, which is plugged into the red master socket, all further appliances in the slave socket can also be automatically switched ON/OFF. For example, you can use a computer as a master device, which can embrace slave appliances in the automatic control such as, e.g. monitor, sound-system, printer, scanner etc. 1 Master, 4 Slave and 4 permanent sockets (alternative adjustable: 9 permanent sockets). Meets the high standards for the environmental safety symbol "The Blue Angel" - minimizes standby losses - low energy...

USBflex Extender over IP is the active extension for USB 2.0 high speed signals and has a range of 160km/99mi in fiber as single version. The in-house developed transparent USB 2.0 interface supports supports USB devices like tablets, touch sceens, sound modules, printers,USB sticks and USB hard drives. The kvm-tec „USB save“ function prevents virus intrusion via the USB interface by disabling mass storage devices. The USBflex Extender can be integrated into a matrix switching system up to 1000 endpoints in conjunction with a standard network switch. With the included Switching Manager software, convenient and intuitive management of KVM extenders in the switching system is possible

The highly optimized Dual KVM Extender over IP has a range of 150m/492ft at a resolution of 1920x1200 @60 Hz and is available infiber as dual version. For point to point or in Matrix Switching Systems up to 1000 endpoints The perfect tuning of kvm-tec video compression with a low latency time enables a delay-free transmission of the signals. USB and video is transmitted via fiber cable. Due to the DVI extension Full HD videos can be transmitted in real time. USB memory, sound, RS232, analog VGA- as DVI transfer are already included. With the included switching upgrade up to 1000 endpoints, the MAXflex Extender can be integrated into a matrix switching system up to 1000 endpoints in conjunction with a standard network switch. kvm-tec Switching Manager - the intelligent software enables convenient management and intuitive operation of KVM extenders in the switching system. A Windows PC or Tablet with network interface is required for commissioning and operating the software.

The highly optimized KVM Extender over IP has a range of 150m/492ft at a resolution of 1920x1200 @60 Hz and is available in copper as single redundant version. For point to point or in Matrix Switching Systems up to 1000 endpoints Redundant for high security in critical applications The perfect tuning of kvm-tec video compression with a low latency time enables a delay-free transmission of the signals. USB and video is transmitted via fiber cable. Due to the DVI extension Full HD videos can be transmitted in real time. USB memory, sound, RS232, analog VGA- as DVI transfer are already included. With the included switching upgrade up to 1000 endpoints, the MAXflex Extender can be integrated into a matrix switching system up to 1000 endpoints in conjunction with a standard network switch. kvm-tec Switching Manager - the intelligent software enables convenient management and intuitive operation of KVM extenders in the switching system.

The highly optimized KVM Extender over IP has a range of 150m/492ft at a resolution of 1920x1200 @60 Hz and is available in copper as dual version. For point to point connection or Matrix Switching Systems up to 1000 endpoints The perfect tuning of kvm-tec video compression with a low latency time enables a delay-free transmission of the signals. USB and video is transmitted via CAT5e/6/7 cable. Due to the DVI extension Full HD videos can be transmitted in real time. USB memory, sound, RS232, analog VGA- as DVI transfer are already included. With the included switching upgrade up to 1000 endpoints, the MAXflex Extender can be integrated into a matrix switching system up to 1000 endpoints in conjunction with a standard network switch. kvm-tec Switching Manager - the intelligent software enables convenient management and intuitive operation of KVM extenders in the switching system. A Windows PC or Tablet with network interface is required for commissioning and operating the software