Integral switches - Import export

Switch probes are contact probes with integrated switch function, that opens or closes after a certain travel. This is very useful for testing the presence or exact position of a component or a connector element.

Incremental, digital interface, resolution 0.2 μm, with final position detection Profile MSK1100: Max. resolution 0.2 μm Repeat accuracy max. ±1 μm ≤0.4 mm reading distance Status LED display Robust metal housing two integrated limit switches, lateral scanning

The leakage sensor enables a realiable detection of water or other conductive media in seconds. The leakage sensor can be easily integrated into switching modules and systems via its RJ12 connector.

EH 25-H JDN Hydraulic Monorail Hoists Carrying capacities: 20 t up to 100 t Our hydraulic hoists can be deployed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systems or hydraulic aggregates are existent. Standard Features predestined for application in explosion-endangered areas (Explosion protection) super-silent encapsuled and robust gear motor integrated overload switch-off only two supply connections at hoist “P” and “T”, leakage oil drained internally

PROFI 6 TI-H JDN Hydraulic Hoists PROFI Carrying capacities: 3 t up to 100 t Our hydraulic hoists can be deployed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systems or hydraulic aggregates are existent. Standard Features predestined for application in explosion-endangered areas (Explosion protection) super-silent encapsuled and robust gear motor integrated overload switch-off only two supply connections at hoist “P” and “T”, leakage oil drained internally

Electric cylinders are self-locking. So they do not need energy when they stand still. This makes the electric cylinders to be an interesting alternative to pneumatic and hydraulic actuators. Powerful DC motors, signal lines, potentiometers and Hall-ICs for position indication, as well as integrated end switches uncomplicatedly serve for meeting the most frequent requirements.

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

Desiccant dehumidifier TTR 200 The lightweight under the high-quality dehumidifiers: the extremely compact and mobile TTR 200 The TTR 200 is an extremely compact and lightweight quality dehumidifier for keeping room air continuously dry or for drying during water damage restoration. All TTR 200 are equipped with the advanced electronic Monoventic air volume regulation which allows stepless, demand-oriented regulation of the required dry air volume. Dehumidification performance and thus power consumption as well as noise emission of the TTR 200 can therefore be defined as required at any time. Even the standard model has an integrated DIN socket for remote switching to control the TTR 200 by means of an optional hygrostat, time clock or other external switching devices with matching DIN plug.

DIESELFIxx 60 l/min-230 V 50 Hz-EUS-EBZM-ZVABD-4 m specification Vane pump with integrated bypass (23 430) Switching on and off by removing the nozzle Hydraulic siphon protection according to WHG (Water Resources Act), permanent effective Flow counter NUMERIxx³, three-digit (23 192) Automatic nozzle with type approval and swivel joint, ZVABD (23 168) Dispensing hose, 4 m, DN 19, G 1" a, G 1" i (23 155 957) Foot valve with suction strainer (19 890) Fassverschraubung, G 2" a, G 1" a Intake hose required according to assembly: 1,6 m (23 156) 2,0 m (23 158 959) 4,0 m (23 155 950) 6,0 m (23 155 956) Packed in a box

Calibrate and adjust mechanical yarn brakes for the textile industry The test specimen is inserted in the UUT, which is mounted on a pneumatic slide. By pressing a button, the candidate moves to the running belt drive. The sample is then tested in different locking positions, the switching of the individual Paramtersätze is realized via a rotary switch. In each latching position, IO / NIO statement about the GMV2 light mounted on the column is displayed visually. After passing the examination, the tray will open again and the next candidate can be inserted. A speed controller as well as an ON / OFF switch for the drive are also integrated in the switch box under the GMV2. The entire inspection unit is mobile and complained to a height-adjustable lifting unit. The GMV2 and connect the switch are also mounted height adjustable in the profiles.

Technical information The SC 03 is an electropneumatic crimp press. It is equipped with a very efficient pedal switch. The correct and fully controlled sequence is monitored by a microprocessor control. The machine is started by a foot-switch. An integrated adjusting mechanism enables a correction of the crimping depth. Crimping tools can be changed easily and are available for the processing of ferrules with a size of up to 70 mm² with different crimping lengths. On customers demand special tools with different crimping geometries can be developed and manufactured.

HGL offers tailor-made PC solutions that have been specially developed to form a holistic measurement system in combination with HGL amplifiers. The PCs offer sufficient power reserves and storage capacity to operate several measuring devices in parallel on one computer and are compact in design. The compatibility with the existing measurement hardware was tested in numerous test series. Different form factors offer different ways to accommodate the computer hardware. In the 19" format, installation in measuring cabinets is no problem. Other form factors offer the option of mounting the PC directly to the back of a monitor. Network switches integrated into the PC hardware provide additional flexibility and clarity when setting up and operating complex measurement systems.

Sensors of the family IGEX22 for use in zone 22 with integrated electronics and direct switching output to the non-explosive area do not need a separate analysis device. This saves space and costs. The EGE IGEX20 proximity switches are based on the conventional inductive principle and switch when a metallic object moves close. This family includes shock and vibration resistant solid stainless steel sensors. The sensors are certified according to ATEX and IECEx. The sensors of this family are suited in the area of explosive dust atmospheres (zone 22) for presence verification, position and movement monitoring and the counting of metallic objects and the speed control on conveyor belts.

Impressive development of the SHS series is assured with the design of the SHS3 switch. Having to replace the safety hinge switch whenever the equipment is bumped or damaged due to mechanical stress is unnecessary thanks to the solution offered by the SHS series. The hinge setting can be corrected even after the switching point is set. This process can be done with the assistance of the integrated adjustment system. The hinge switch is also reusable even when the system itself needs to be converted. Thanks to change kits, the operator can redefine the switching point without compromising the IP 67 protection rating.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

For lifting of ground parts, bulk material and for occasional sorting out of magnetizable parts. ERM are equipped with mounted switch and integrated rectifier, for direct connection to 230 V mains voltage. The field depth is approx. 80-120 mm. Not permitted for transporting solid workpieces in unprotected areas.

With digital Master-Slave function, overload protection and interference filter. Protection for your appliance from malfunctions in the mains, such as surges, indirect lightning strikes or circuit noises, with a maximum sum of leakage current of up to 30.000 A. Top quality protection against HF interference by means of an integrated filter. With the switching ON/OFF of the device, which is plugged into the red master socket, all further appliances in the slave socket can also be automatically switched ON/OFF. For example, you can use a computer as a master device, which can embrace slave appliances in the automatic control such as, e.g. monitor, sound-system, printer, scanner etc. Meets the high standards for the environmental safety symbol "The Blue Angel" - minimizes standby losses - low energy consumption - avoids materials that pollute the environment. Digital: Saves the correct setting for your master unit at the push of a button. Modern: Switches your slave unit safe and...

With digital Master-Slave function, overload protection and interference filter. Protection for your appliance from malfunctions in the mains, such as surges, indirect lightning strikes or circuit noises, with a maximum sum of leakage current of up to 120.000 A. Added protection against interference pulses via telephone, ISDN/DSL or aerial ports. Top quality protection against HF interference by means of an integrated filter. With the switching ON/OFF of the device, which is plugged into the red master socket, all further appliances in the slave socket can also be automatically switched ON/OFF. For example, you can use a computer as a master device, which can embrace slave appliances in the automatic control such as, e.g. monitor, sound-system, printer, scanner etc. 1 Master, 4 Slave and 4 permanent sockets (alternative adjustable: 9 permanent sockets). Meets the high standards for the environmental safety symbol "The Blue Angel" - minimizes standby losses - low energy...

Any device is only as reliable as the sum of its components. With more than fifteen years of experience in manufacturing tuned and detuned filter reactors for power factor correction, we are now offering our range of line reactors for application in power electronics. Same as with our capacitors, we focus on minimized power losses and maximum durability of the reactor – optimized for your application. Made of high-class transformer sheets and copper wire or aluminium band. Vacuum-impregnated with environmentally friendly, low-styrole resin for long operating life, high voltage strength and low noise levels. Standard terminals: copper terminal lugs, optional with screw-terminal blocks or cables. Integrated reversible thermal switch for monitoring of the reactor and control of external disconnection in case of overheating. Our standard range covers 400V 50Hz up to 300A per phase. Other values are available on request.

Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via PROFINET. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. The Profinet interface according to IEC 61158 / 61784 or PNO specifications order No. 2.712 and 2.722, version 2.2, is integrated into the model series TRT absolute encoders. Real time classes 1 - 3 are supported, i.e. Real Time (RT) and Isochronous Real Time (IRT) plus the requirements of conformance class C. Setting the address, baud rate or terminating resistances is not necessary. A name, which is stored in the absolute encoder's non-volatile memory, is assigned via the PROFINET controller to address the device.

The KRP model series rotary encoders are intended for connecting directly to the Ethernet/IP network. Setting the address, baud rate or terminating resistances is not necessary. The IP address is assigned via a BOOTP or DHCP server in the Ethernet/IP network.The integrated 2-fold switch enables the KRP model series rotary encoders to be used in star, tree and line network topologies.

This involves a play-free electronic switching cam encoder (abbreviated to: NOCI) with a maximum of four galvanically separated1) SIL2 switching outputs that can be set by the customer, and which are activated or deactivated depending on the respective position of the drive shaft. A parameterisable multiturn absolute encoder with incremental interface as well as the four switching outputs are integrated in the compact housing. The switching outputs can be preset. A special shaft design appropriate to the play-compensating measurement gear ZRS is available. The supply voltage, incremental signal and switching contacts are each galvanically separated from one another

The pressure switch P01 has been designed especially for use in mobile machines. The EMC characteristics as well as the impact and vibration resistances have been designed for this field of application. This facilitates their use in adverse ambient conditions such as can be found in mobile hydraulics. The integrated electronic switches (NPN or PNP) can be preconfigured ex-works. The P01 is available for pressure ranges from 0...10 bar to 0...1200 bar, whereby a switching accuracy of 1 % of the measurement range end value can be achieved. The maximum permitted media temperature totals 150 ºC; the ambient temperature totals 125 ºC. The parts coming into contact with media have been produced from stainless steel (1.4548) and guarantee, in combination with the welded thin-film measurement cell, maximum media compatibility. Optionally, a damping device can be integrated into the media access.

The potentiometers of the series 46 are used as multiturn sensors or manual adjusters, with outstanding linearity and resolution for measuring ranges from 3 to 30 turns. The optionally integrable limit switches can be factory-configured within the electrically effective angle of rotation or within the signal plateau. Potentiometer with many options. Multiturn 3…20 turns (30 turns on request) Power rating up to 10 W Single-wire versions have nearly infinite resolution

The Elevation Line includes both DC spring-pressure single-disc brakes as well as spring-pressure double-disc brakes which comply with EN 81 (Safety Regulations Concerning the Design and Installation of Elevators). Integrated micro-switches allow for remote inquiry of the brake condition (armature position, wear, armature bearing). Owing to the patented safety concept, the otherwise mandatory testing of the dual-circuit braking system of the spring-pressure brake at the approval of the elevator system can be dropped. The brake can be used in places where short construction lengths with respective system components like motor, gear and brake must be realized. The Elevation Line is primarily used for elevators, but can be used wherever the brake must meet demanding safety requirements. Electromagnetic spring-pressure brakes build up the braking torque when the current is switched off.

Optical sensors function contactlessly. They detect objects independent of their characteristics (e.g., shape, color, surface structure, material). The basic operating principle is based on the transmission and reception of light. There are three different versions: 1. The through-beam sensor consists of two separate devices, a transmitter and a receiver that are aligned with one another. If the light beam between the two devices is interrupted, the switching output integrated in the receiver changes its status. 2. With the retro-reflective sensor, the transmitter and receiver are located in one device. The emitted light beam is reflected back to the receiver by a reflector that is to be mounted opposite the device. As soon as the light beam is interrupted, the switching output integrated in the device changes its status. 3. With the diffuse reflection sensor, the transmitter and receiver are in one device. The emitted light beam is reflected by the object that is to be detected.

Optical sensors function contactlessly. They detect objects independent of their characteristics (e.g., shape, color, surface structure, material). The basic operating principle is based on the transmission and reception of light. There are three different versions: 1. The through-beam sensor consists of two separate devices, a transmitter and a receiver that are aligned with one another. If the light beam between the two devices is interrupted, the switching output integrated in the receiver changes its status. 2. With the retro-reflective sensor, the transmitter and receiver are located in one device. The emitted light beam is reflected back to the receiver by a reflector that is to be mounted opposite the device. As soon as the light beam is interrupted, the switching output integrated in the device changes its status. 3. With the diffuse reflection sensor, the transmitter and receiver are in one device. The emitted light beam is reflected by the object that is to be detected.

LED-bar light from with diffus and even light: Can used as a diffuse back lighting for line images and for diffuse top lighting. You can also use as wash down light ore low-angle light. LED-bar light with 30 degree beam angle: Can uses for bright lighting with short light distance and for lighting with large camera distance. In the led barlight we can integrate an switch input with opto-coupler. So you can switch the barlight from PC or SPS. LED-line light for line camera systems and dark field illumination: Light with only 3 degree beam angle, hight quality cylindrical lens. One light for various working distances. So you can use for line cameras for direct lighting, but also for a wash down light. LED-Spot MINI and Maxi: The small radiators with high capacity can be used universally. The already installes power controls and hte gate inputs make the handling very easy and sucure. You can use as spot light, but also as wash down light. The Spots will also will made in cusomer's specification. The same is valid for very big areas with break throughs. planistar is building a lot of standard lightings, but also customized lights. So we can build a special lighting for your application.

precision slides with ball screws or trapezoidal screw drive. - Three sizes – 100, 155 and 225 - Cover variants – sheet or bellows cover - Traversing carriage available in two lengths - Various stepper and servo motors, controllers, special versions such as - Motor deflections via timing belt drive make the precision slides universal can be used and are optionally available with or without motor. - Integrated limit switches (inductive proximity switches) with cable entry or plug connection in the endplate. - Base plate and end plates are made of a surface-treated and high-strength aluminium alloy. - Modular use, e. g. as multi-axis systems