Ibc - Import export

1) Modified PVC coated fabric is suited for placing heavy materials within the working space, occasional drive-in or –out scenarios and pedestrian traffic 2) Chemical resistant and withstands long-term UV exposure— great for outdoor use 3) Patented Rigid-Lock integral stainless-steel wall-support system is 30 cm deep and locks at 90° for secure, leakproof containment 4) Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space 5) Quick and easy setup – no assembly required

EMA intermediate bulk container (IBC) is a large vessel that is used to store fluid and bulk materials or transport them. IBC’s can be manufactured from many different materials such as stainless steel, aluminum, mild steel, and exotic alloys. EMA designes manufactures hundreds of intermediate bulk containers and bins (IBC's) per year. EMA 350 gallon (1325 liter) Intermediate Bulk Container is one of EMA’s most popular IBC’s. EMA's advanced manufacturing technology provides a one-piece body, 10-gauge (.135”/3.4 mm) stainless steel construction and single-seam welding, for greater strength and durability. The features either a center drain or side drain discharge outlet to meet your individual delivery system needs. All tanks are manufactured with sloped bottoms and 2” (5.08 cm) ball valve discharge and safety cap.

T&D International are the UK’s Specialist Distributor of Drum & IBC Heating Equipment to diverse industries including process, food and beverage, confectionery, manufacturing, chemicals, pharmaceutical and utilities – we service the international marketplace via our dedicated Exports Department. We are the UK’s largest supplier of highest performance heating jackets and systems for temperature control of bulk containers (IBC’s), storage drums, pumps, pipes, tanks and gas bottle cylinders. Specialist application heating jackets for drum and IBC containers are available including Hazardous Area certified heaters conforming to the ATEX Directive for safe use in potentially explosive atmospheres, including Zone 1 and Zone 2 – advice about storage of flammable liquids in bulk containers is covered by UK HSE HSG51. T&D provide even distribution and transfer of electric surface heat to drums and IBC’s without risk of hot or cold spots by thermostatically controlled insulated heating

The IBC/Bpro-Container Jacket Heater is an insulated heater jacket for the heating of bottle-in-a-cage containers. All four sides of the container are covered by the heater. The container heater has two separate heating circuits (top and bottom), allowing for an economical heating of half-filled containers, too. The HILC unheated insulated lid can be used in addition to shorten the heat-up time. The IBC/B heating jacket can also be combined with the IBC/A container base heater. It's a silicone heater mat that is placed below the plastic container before that is filled.

Some key features of the IBC weighing filling machine may include: High-precision load cells Automatic tare and gross weighing functions Product-specific filling programs Easy-to-use touchscreen interfaces Automatic valve control for precise filling Automatic IBC positioning and clamping A range of safety features, such as emergency stop buttons and safety guarding Overall, the IBC weighing filling machine is an excellent investment for any business that requires accurate and efficient filling processes for intermediate bulk containers.

MODULAR COLLECTION TANKS IN PE FOR 1000 LT IBC AND DRUMS Modular tanks placeable side by side and connectable in series for the safe storage and tapping of up to 4 drums side by side or containers containing liquids. Resistant to most acids, bases and oils and resistant to rust, they allow safe storage and prevent spills of dangerous liquids in the aquifers. The tanks can be moved with forklift trucks and transpallets and are stackable. They are designed for connection to each other and are supplied with a connection fitting. The standard color is orange.

The horizontally installed, compact container pump MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top. It is suitable for applications when gravity draining via the outlet tap is insufficient e.g. rapid dispensing or transfer to another container in a higher location. Power can ideally be provided by a commutator or compressed air motor. Benefits: - Can be used where ceilings are low - Allows pumping directly from floor-level outlets, even when containers are stacked - Significantly higher flow rate and pressure compared to draining by gravity - Minimal space requirement - Simple disconnection from IBC with union nut - Delivery against closed valve (e.g. hand nozzle, flap valve etc.) possible - Suitable for use in hazardous areas zone 1

Net weight filling machines use a weigh scale platform to monitor the weight of product as it is filling into a bottle or container. Net weight fillers are well suited for large container filling applications. This type machine is used for 5kg -30 kg,and 50KG to 300KG, and IBC system liquid filling. both of gravity filling or pump feeding liquid system with weight scale under filling nozzle or under the conveyor to assure filling accuracy. It can finish a series of operations automatically, such as bottle inlet, weight filling, and bottle outlet. Especially for SL, edible oil lubrication. it is a nice choice for foodstuff, pharmacy, cosmetic and chemical industries.Linear type machine, can be made with 2/4/6/8 filling nozzle for different filling capacity.

CONTAINMENT TANKS WITH PERCH FOR 1000 LITERS IBCS Containment tanks with perch to facilitate emptying, specific for 1000 liter cisterns. They are available for the storage of 1 or 2 small tanks. The containers of polluting liquids must be stored in a safe manner, in order to prevent contamination of the aquifers in particular. The collection tanks are watertight, oven-painted with epoxy powders and equipped with a hot-galvanized, removable grid. Color RAL 5010 blue. They are also equipped with special seats for forklift loading. Available models: FPB826C: tank for the storage of 1 1000 liter cisterns FPB8070T: tank for the storage of 2 1000 liter cisterns It is the responsibility of the user to check that the products destined to be stored and handled are compatible with the construction material and the possible painting of the tanks.

METALLIC CONTAINMENT TANKS FOR 1000 LITERS IBCS Containment tanks, specific for 1000 liter cisterns. They are available for the storage of 1 or 2 cisterns. The containers of polluting liquids must be stored in a safe manner, in order to prevent contamination of the aquifers in particular. The collection tanks are watertight, painted with epoxy powders and the support surface is in hot galvanized grating and can be removed. Blue RAL 5010 color. The tanks are equipped with special seats for forklifting. Available models: FPB826S: tank for the storage of 1 1000 liter cistern FPB8070C: tank for the storage of 2 1000 liter cisterns It is the responsibility of the user to check that the products destined to be stored and handled are compatible with the construction material and any painting of the tanks.

IBC/A-Container Base Heaters are used for the heating of bag-in-box containers. It's a silicone heater mat that is placed below the bag before that is filled. For a faster warming, an additional unheated insulating sheath covering the four sides and the HILC unheated insulated lid can be used. The IBC/Bpro-Container heating jacket as well as the HILC unheated insulated lid are perfect means to support the IBC/A base heater. Using the base heater together with the heating jacket and the insulation cover accelerates the heating process and to reduces heat losses.

The IBC weighing filling machine is a sophisticated piece of equipment that is designed to accurately fill intermediate bulk containers (IBCs) with a variety of different products. These machines feature high-precision weighing systems that ensure accurate measurement every time, and they are capable of liquid filling IBC Application Filling 60L, 100L, 200L and 1200Ldrums and filling IBC and POLY TANK Directly filling the drums stocked on the pallet Resin, solvent, and varnish products Food and beverage products such as liquid sugar, cooking oil, and resin Liquid chemical

IBC discharge valve with 90° hose nozzle and sealing cap. The hose can also be closed with the enclosed sealing cap. Hose nozzle external PA Ø 30 mm, suitable for flexible hoses. The IBC discharge valve is a sturdy, high-quality ball valve with a hose connection and connection adapter including seal, for standard thread S 60x6 external or 1" external, designed to fit all commonly used European IBC containers. With the appropriate thread, the discharge valve can also be screwed directly onto the original discharge valve that is already on the IBC tank if the original valve is leaking or faulty. In this way the IBC discharge valve ensures fast and reliable residual emptying of the container with good dosing. The discharge valve is an indispensable accessory to ensure a professional connection of the hose or for filling from your IBC container.

Rent our foldable berms for spill containment: 1) Modified PVC coated fabric is suited for placing heavy materials within the working space, occasional drive-in or –out scenarios and pedestrian traffic 2) Chemical resistant and withstands long-term UV exposure— great for outdoor use 3) Patented Rigid-Lock integral stainless-steel wall-support system is 30 cm deep and locks at 90° for secure, leakproof containment 4) Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space 5) Quick and easy setup – no assembly required

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * reinforced elastomers and thermoplastic diaphragms * absolutely oil-free * non-stalling operation

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * also available in the Pure version (5234-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated muffler up to model size AODD 1" * also available in the Pure version (5234-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * also available in the Pure version (5224-410) Features & Benefits * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * absolutely oil-free * non-stalling operation * conductive version approved according to ATEX Directive 2014/34/EU, Category 2

Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits: * high hydraulic performance * maintenance-optimised design and simple installation * self-priming (even when dry) * reinforced elastomers and thermoplastic diaphragms * absolutely oil-free * non-stalling operation

The tote tank mixers CRP-E are equipped with a pneumatic drive. It has been especially designed for plastic IBCs with filling openings of at least 150 mm and volumes from 600 l up to 1,200 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. Folding propellers that fit through the filling opening DN 150 mm are used for geared agitators. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. Explosion-proof mixers are also feasible.

The tote tank mixers CR-E are designed for operation on plastic containers with filling openings of 150 mm and volumes from 600 l up to 1,200 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. The fixing of the traverse bridge is adjustable for various container models. The impellers are designed to fit through the filling opening 150 mm when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker.

CRP-M - Pneumatic tote tank mixer for stainless IBCs The CRP-M tote tank mixers are featured with a pneumatic drive and were designed for the application in stainless steel tanks with filling openings of at least 400 mm and mixing volumes of 400 l to 1,500 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening of at least 400 mm when being inserted. All CRP-M series can be supplied as follows: Lid Muffler Explosion-protection design

CR-M - Electric tote tank mixer for stainless steel IBCs The tote tank mixers CR-M are designed for operation on stainless steel containers with filling openings of DN 400 mm and mixing volumes from 400 l up to 1,500 l. Depending on the viscosity of the mixing material, CR-Ms with fast running or gear reduced drives are available. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gear). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening DN 400 when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker. The electric container mixers can also be supplied with frequency converter drives. All CR-M...

CRP-E - Pneumatic tote tank mixer for plastic IBCs CRP-E Pneumatic tote tank mixer for plastic IBCs The tote tank mixers CRP-E are equipped with a pneumatic drive. It has been especially designed for plastic IBCs with filling openings of at least 150 mm and volumes from 600 l up to 1,200 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator Folding propellers that fit through the filling opening DN 150 mm are used for geared agitators. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are...

CR-E - electric tote tank mixer for plastic IBCs The tote tank mixers CR-E are designed for operation on plastic containers with filling openings of 150 mm and volumes from 600 l up to 1,200 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. CR-E 6 0,75 The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. The fixing of the traverse bridge is adjustable for various container models. The impellers are designed to fit through the filling opening 150 mm when being inserted. The electric...

The CRP-M tote tank mixers are featured with a pneumatic drive and were designed for the application in stainless steel tanks with filling openings of at least 400 mm and mixing volumes of 400 l to 1,500 l. The fast running pneumatic agitators are equipped with bearing and coupling housings. By means of the maintenance unit, pressurized air is enriched with oil for the vane drive. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening of at least 400 mm when being inserted. All CRP-M series can be supplied as follows: Lid Muffler Explosion-protection design

The tote tank mixers CR-M are designed for operation on stainless steel containers with filling openings of DN 400 mm and mixing volumes from 400 l up to 1,500 l. Depending on the viscosity of the mixing material, CR-Ms with fast running or gear reduced drives are available. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gear). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening DN 400 when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker. The electric container mixers can also be supplied with frequency converter drives. All CR-M series mixers can be supplied as follows:

Our products are manufactured in conformity with Reach, Rohs and Pah. Production is carried out in conformity with FDA. Our products are made in the diameter, length and hardness you want.

Our OliveOilsLand® branded Olive Oils, which are produced with Cold pressing technique in our facility where the food safety standards are protected at the highest level and in stainless steel tanks contact with air, feels pleasant in your palate with its unique taste. It is also called The Aegean Olive Oil's Flavour among the people A natural Extra Virgin Olive Oil with a high content of vitamins, aroma, polyphenols and antioxidants is obtained by storing under nitrogen gas and bottling away from light and oxygen. Quality control activities are planned and developed in accordance with ISO 9001 Quality Management System in all processes from harvest to reaching consumer.