Results for
IFA TECHNOLOGY GMBH
Germany
The range of IBC container filling systems and IBC container emptying systems from IFA Technology is versatile and ranges from small individual stations to large shelves offering space for several IBC containers. We consider your individual requirements and build customised IBC container filling stations and IBC container emptying stations for you. Our systems enable, for instance, automatic emptying and switching over of containers or the recording of filling levels. For this we consider the requirements of the German Water Resources Act (WHG) and the ATEX directive of the European Union.
Request for a quoteEXPERT-PACK MICHAL DOMARANCZYK
Poland
PM10, PM11, PM12 IBC tanks are commonly used for storage and transportation of chemicals, fluids, food and dangerous materials usually required by UN certification of storage. CAPACITY – effective 1000L capacity, effective for transportation. USAGE – simple and fast fill in, with 2 inch and 3 inch valve, wide inlet (150mm and 225mm). SAFETY – Made of high density and quality PE. Resistant to acids, alkalines, oils and other chemicals. Provided with metal housing and pallet – PM10 wood, PM11 plastic, PM12 plastic.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The IBC/Bpro-Container Jacket Heater is an insulated heater jacket for the heating of bottle-in-a-cage containers. All four sides of the container are covered by the heater. The container heater has two separate heating circuits (top and bottom), allowing for an economical heating of half-filled containers, too. The HILC unheated insulated lid can be used in addition to shorten the heat-up time. The IBC/B heating jacket can also be combined with the IBC/A container base heater. It's a silicone heater mat that is placed below the plastic container before that is filled.
Request for a quoteFRIEDR. FREEK GMBH
Germany
IBC/A-Container Base Heaters are used for the heating of bag-in-box containers. It's a silicone heater mat that is placed below the bag before that is filled. For a faster warming, an additional unheated insulating sheath covering the four sides and the HILC unheated insulated lid can be used. The IBC/Bpro-Container heating jacket as well as the HILC unheated insulated lid are perfect means to support the IBC/A base heater. Using the base heater together with the heating jacket and the insulation cover accelerates the heating process and to reduces heat losses.
Request for a quoteSUN CHEMICAL - COLORS & EFFECTS NETHERLANDS B.V
Netherlands
Intermediate Bulk Container (IBC) drum with 1000kg capacity/drum Use plastic drums with 200 kg weight capacity per drum
Request for a quoteSUN CHEMICAL - COLORS & EFFECTS NETHERLANDS B.V
Netherlands
Intermediate Bulk Container (IBC) drum with 1000kg capacity/drum Use steel drums with 170 kg weight capacity per drum
Request for a quoteSUN CHEMICAL - COLORS & EFFECTS NETHERLANDS B.V
Netherlands
Intermediate Bulk Container (IBC) drum with 1000kg capacity/drum Steel drums with 170 kg weight capacity per drum
Request for a quoteSUN CHEMICAL - COLORS & EFFECTS NETHERLANDS B.V
Netherlands
Intermediate Bulk Container (IBC) drum with 1000 kg capacity/drum or tank Use plastic drums with 200 kg weight capacity per drum.
Request for a quoteSUN CHEMICAL - COLORS & EFFECTS NETHERLANDS B.V
Netherlands
Intermediate Bulk Container (IBC) drum with 1000kg capacity/drum Use steel drums with 100 kg weight capacity per drum
Request for a quoteSUN CHEMICAL - COLORS & EFFECTS NETHERLANDS B.V
Netherlands
Intermediate Bulk Container (IBC) drum with 1000kg capacity/drum Use steel drum with 40kg/drum capacity and plastic woven bags with 40kg/bag capacity
Request for a quoteSUN CHEMICAL - COLORS & EFFECTS NETHERLANDS B.V
Netherlands
Intermediate Bulk Container (IBC) drum with 1000kg capacity/drum Use steel drums with 170 kg weight capacity per drum Use plastic drums with 180 kg or 200 kg weight capacity per drum
Request for a quoteAAAGILER GMBH
Germany
1) Modified PVC coated fabric is suited for placing heavy materials within the working space, occasional drive-in or –out scenarios and pedestrian traffic 2) Chemical resistant and withstands long-term UV exposure— great for outdoor use 3) Patented Rigid-Lock integral stainless-steel wall-support system is 30 cm deep and locks at 90° for secure, leakproof containment 4) Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space 5) Quick and easy setup – no assembly required
Request for a quoteAAAGILER GMBH
Germany
Rent our foldable berms for spill containment: 1) Modified PVC coated fabric is suited for placing heavy materials within the working space, occasional drive-in or –out scenarios and pedestrian traffic 2) Chemical resistant and withstands long-term UV exposure— great for outdoor use 3) Patented Rigid-Lock integral stainless-steel wall-support system is 30 cm deep and locks at 90° for secure, leakproof containment 4) Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space 5) Quick and easy setup – no assembly required
Request for a quoteIFA TECHNOLOGY GMBH
Germany
Different stirring elements and agitator speeds possible, adapted to your application, product density, viscosity and solid content Lockable IBC fastening crossbeam for IBC containers 400 to 2,500 litre capacity, with forklift truck adapter Addition of liquids under stirring possible, by connection nozzle at the IBC mounting crossbar Material: stainless steel 304 / 316Ti (product contacted parts) Geared motors in various power ratings optional with speed adjustment via attached frequency converter On/Off switch with motor protection and CEE plug with low voltage release FIELD OF APPLICATIONS
Request for a quoteFERPLAST SNC
Italy
CONTAINMENT TANKS WITH PERCH FOR 1000 LITERS IBCS Containment tanks with perch to facilitate emptying, specific for 1000 liter cisterns. They are available for the storage of 1 or 2 small tanks. The containers of polluting liquids must be stored in a safe manner, in order to prevent contamination of the aquifers in particular. The collection tanks are watertight, oven-painted with epoxy powders and equipped with a hot-galvanized, removable grid. Color RAL 5010 blue. They are also equipped with special seats for forklift loading. Available models: FPB826C: tank for the storage of 1 1000 liter cisterns FPB8070T: tank for the storage of 2 1000 liter cisterns It is the responsibility of the user to check that the products destined to be stored and handled are compatible with the construction material and the possible painting of the tanks.
Request for a quoteFERPLAST SNC
Italy
METALLIC CONTAINMENT TANKS FOR 1000 LITERS IBCS Containment tanks, specific for 1000 liter cisterns. They are available for the storage of 1 or 2 cisterns. The containers of polluting liquids must be stored in a safe manner, in order to prevent contamination of the aquifers in particular. The collection tanks are watertight, painted with epoxy powders and the support surface is in hot galvanized grating and can be removed. Blue RAL 5010 color. The tanks are equipped with special seats for forklifting. Available models: FPB826S: tank for the storage of 1 1000 liter cistern FPB8070C: tank for the storage of 2 1000 liter cisterns It is the responsibility of the user to check that the products destined to be stored and handled are compatible with the construction material and any painting of the tanks.
Request for a quoteSHANGHAI NPACK AUTOMATION EQUIPMENT CO., LTD.
China
The IBC weighing filling machine is a sophisticated piece of equipment that is designed to accurately fill intermediate bulk containers (IBCs) with a variety of different products. These machines feature high-precision weighing systems that ensure accurate measurement every time, and they are capable of liquid filling IBC Application Filling 60L, 100L, 200L and 1200Ldrums and filling IBC and POLY TANK Directly filling the drums stocked on the pallet Resin, solvent, and varnish products Food and beverage products such as liquid sugar, cooking oil, and resin Liquid chemical
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BÜRKLE GMBH
Germany
IBC discharge valve with 90° hose nozzle and sealing cap. The hose can also be closed with the enclosed sealing cap. Hose nozzle external PA Ø 30 mm, suitable for flexible hoses. The IBC discharge valve is a sturdy, high-quality ball valve with a hose connection and connection adapter including seal, for standard thread S 60x6 external or 1" external, designed to fit all commonly used European IBC containers. With the appropriate thread, the discharge valve can also be screwed directly onto the original discharge valve that is already on the IBC tank if the original valve is leaking or faulty. In this way the IBC discharge valve ensures fast and reliable residual emptying of the container with good dosing. The discharge valve is an indispensable accessory to ensure a professional connection of the hose or for filling from your IBC container.
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Depending on the application and requirements, the AdBlue® containers we offer provide the optimum solution for your business. Whether 5l canisters, 10l canisters, 210l drums, 1000l IBC containers or the loose delivery of AdBlue® by tank truck – let our consulting team advise you without cost or obligation. All AdBlue® products in our portfolio meet the specifications: AUS 32, DIN 70070, ISO 22241.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying aqueous and fatty food from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motorsareavailable , which can be combined with the Pump tubeat any time. This gives you flexibility at all times, thus saving important resources. * Horizontal connection on the bottom run of the container * Pump tube equipped with Lutz original hand wheel * also for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents Features & Advantages * Optionally with electric or compressed air drive * Low loss of the medium when disconnected * Food grade connections * Low space requirement * Approved according to FDA and regulation (EG) 1935/2004
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container * IBC connection: S60 x 6 Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Easy to install * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying highly aggressive, thin-bodied, flammable and explosive liquids from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. * Horizontal connection at the bottom run of the container * Pump tube equipped with Lutz original hand wheel * Suitable for emptying alternative fuels, oils, flammable liquids * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Explosion-proof versions for applications in hazardous areas (Zone 1 and 2) * Easy to dismantle * Low space requirement
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Depending on the application, various motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Horizontal connection at the bottom of the container * Also for alcoholic foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Food-safe connections * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2 * Approved according to FDA and Regulation (EC) 1935/2004 The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteIFA TECHNOLOGY GMBH
Germany
Liquids (for instance raw materials or end products) are stored in canisters, drums, IBC containers or storage tanks. Solids and bulk materials, on the other hand, are stored in bags, big bags, silos or various special containers. IFA Technology offers sound and safe handling for the storage of liquids, solids and bulk materials as well as suitable storage containers such as customised shelves, tank farms or silo systems. We check and control among other things the compatibility of the substances, the effect of environmental influences as well as the conformity with legal requirements. We ensure compliance with various regulations such as the German Water Resources Act (WHG) or Explosive Atmospheres Directive (ATEX) by means of temperature-controlled storage tanks and the blanketing of the relevant substances by means of nitrogen, dry air or gas displacement systems or their circulation via agitators or circulation.
Request for a quoteWACHSFABRIK SEGEBERG GMBH
Germany
We offer you the filling of your products With our production technology, we are able to meet almost all requirements and have appropriate filling facilities for: Tubes, bottles, cans, jars, canisters, barrels, pails, containers (including IBCs) Take advantage of our expertise in the filling of a wide variety of products. We react quickly, flexibly and precisely to changing requirements with well-organised processing times and reliable scheduling.
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit for food and pharma. The pump-kit is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. Comprising drum pump FP 427 FOOD, outer tube stainless steel 1000 or 1200 mm, commutator motor F 458, hose, hand nozzle, hose connection and compression gland. Product attributes: - Sealless in the liquid area - Minimal dead spots - Can be taken apart completely in only a few steps - Disassembly almost without tools possible Benefits: - Ideal as hygienic pump - Can be quickly and easily taken apart for cleaning - All parts in contact with the medium can be sterilized - Transfers also fluids containing solids such as juices with pulp or soups with spices - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21 - Also available for the ex-area with drum pump FP 430 Ex FOOD
Request for a quoteFLUX-GERÄTE GMBH
Germany
The Drum pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel (316 Ti resp. 1.4581). The pump is also available as FOOD and 3A certified version and complies with international safety standards. Benefits: - Ideal as hygienic pump - Can be quickly and easily taken apart for cleaning - All parts in contact with the medium can be sterilized - Transfers also fluids containing solids such as juices with pulp or soups with spices - Available with different connection at the pressure side (e.g. Clamp 1 1/2" or RD 58x1/6) - Available with 3A Certificate - Available as FOOD version - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21
Request for a quoteResults for
Ibc containers - Import exportNumber of results
52 ProductsCountries
Category