Results for
IFA TECHNOLOGY GMBH
Germany
The range of IBC container filling systems and IBC container emptying systems from IFA Technology is versatile and ranges from small individual stations to large shelves offering space for several IBC containers. We consider your individual requirements and build customised IBC container filling stations and IBC container emptying stations for you. Our systems enable, for instance, automatic emptying and switching over of containers or the recording of filling levels. For this we consider the requirements of the German Water Resources Act (WHG) and the ATEX directive of the European Union.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The IBC/Bpro-Container Jacket Heater is an insulated heater jacket for the heating of bottle-in-a-cage containers. All four sides of the container are covered by the heater. The container heater has two separate heating circuits (top and bottom), allowing for an economical heating of half-filled containers, too. The HILC unheated insulated lid can be used in addition to shorten the heat-up time. The IBC/B heating jacket can also be combined with the IBC/A container base heater. It's a silicone heater mat that is placed below the plastic container before that is filled.
Request for a quoteFRIEDR. FREEK GMBH
Germany
IBC/A-Container Base Heaters are used for the heating of bag-in-box containers. It's a silicone heater mat that is placed below the bag before that is filled. For a faster warming, an additional unheated insulating sheath covering the four sides and the HILC unheated insulated lid can be used. The IBC/Bpro-Container heating jacket as well as the HILC unheated insulated lid are perfect means to support the IBC/A base heater. Using the base heater together with the heating jacket and the insulation cover accelerates the heating process and to reduces heat losses.
Request for a quoteAAAGILER GMBH
Germany
1) Modified PVC coated fabric is suited for placing heavy materials within the working space, occasional drive-in or –out scenarios and pedestrian traffic 2) Chemical resistant and withstands long-term UV exposure— great for outdoor use 3) Patented Rigid-Lock integral stainless-steel wall-support system is 30 cm deep and locks at 90° for secure, leakproof containment 4) Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space 5) Quick and easy setup – no assembly required
Request for a quoteAAAGILER GMBH
Germany
Rent our foldable berms for spill containment: 1) Modified PVC coated fabric is suited for placing heavy materials within the working space, occasional drive-in or –out scenarios and pedestrian traffic 2) Chemical resistant and withstands long-term UV exposure— great for outdoor use 3) Patented Rigid-Lock integral stainless-steel wall-support system is 30 cm deep and locks at 90° for secure, leakproof containment 4) Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space 5) Quick and easy setup – no assembly required
Request for a quoteIFA TECHNOLOGY GMBH
Germany
Different stirring elements and agitator speeds possible, adapted to your application, product density, viscosity and solid content Lockable IBC fastening crossbeam for IBC containers 400 to 2,500 litre capacity, with forklift truck adapter Addition of liquids under stirring possible, by connection nozzle at the IBC mounting crossbar Material: stainless steel 304 / 316Ti (product contacted parts) Geared motors in various power ratings optional with speed adjustment via attached frequency converter On/Off switch with motor protection and CEE plug with low voltage release FIELD OF APPLICATIONS
Request for a quoteAAAGILER GMBH
Germany
Rent or hire mobile, drivable, foldable collection trays, e.g. for filling trucks, drums and IBC containers. These are a simple and effective means of collecting escaping substances, not only in industry when there is only a temporary need or capacity bottlenecks. UV-resistant and therefore suitable for outdoor use. There are two standard sizes for the folding tubs for hire: 1) Small: approx. 1.8 x 2.4 m x 0.3 m, volume 1344 l, 1 approx. 16 kg weight. 2) Medium: approx. 3.25 m x 3.25 m x 0.3 m, volume 2820 l, approx. 33 kg weight 3) Other sizes on request. The tub walls are foldable and the tub floor can be carefully driven over with a forklift truck.
Request for a quoteBÜRKLE GMBH
Germany
IBC discharge valve with 90° hose nozzle and sealing cap. The hose can also be closed with the enclosed sealing cap. Hose nozzle external PA Ø 30 mm, suitable for flexible hoses. The IBC discharge valve is a sturdy, high-quality ball valve with a hose connection and connection adapter including seal, for standard thread S 60x6 external or 1" external, designed to fit all commonly used European IBC containers. With the appropriate thread, the discharge valve can also be screwed directly onto the original discharge valve that is already on the IBC tank if the original valve is leaking or faulty. In this way the IBC discharge valve ensures fast and reliable residual emptying of the container with good dosing. The discharge valve is an indispensable accessory to ensure a professional connection of the hose or for filling from your IBC container.
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Depending on the application and requirements, the AdBlue® containers we offer provide the optimum solution for your business. Whether 5l canisters, 10l canisters, 210l drums, 1000l IBC containers or the loose delivery of AdBlue® by tank truck – let our consulting team advise you without cost or obligation. All AdBlue® products in our portfolio meet the specifications: AUS 32, DIN 70070, ISO 22241.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying aqueous and fatty food from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motorsareavailable , which can be combined with the Pump tubeat any time. This gives you flexibility at all times, thus saving important resources. * Horizontal connection on the bottom run of the container * Pump tube equipped with Lutz original hand wheel * also for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents Features & Advantages * Optionally with electric or compressed air drive * Low loss of the medium when disconnected * Food grade connections * Low space requirement * Approved according to FDA and regulation (EG) 1935/2004
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container * IBC connection: S60 x 6 Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Easy to install * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying highly aggressive, thin-bodied, flammable and explosive liquids from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. * Horizontal connection at the bottom run of the container * Pump tube equipped with Lutz original hand wheel * Suitable for emptying alternative fuels, oils, flammable liquids * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Explosion-proof versions for applications in hazardous areas (Zone 1 and 2) * Easy to dismantle * Low space requirement
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Depending on the application, various motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Horizontal connection at the bottom of the container * Also for alcoholic foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Food-safe connections * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2 * Approved according to FDA and Regulation (EC) 1935/2004 The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteIFA TECHNOLOGY GMBH
Germany
Liquids (for instance raw materials or end products) are stored in canisters, drums, IBC containers or storage tanks. Solids and bulk materials, on the other hand, are stored in bags, big bags, silos or various special containers. IFA Technology offers sound and safe handling for the storage of liquids, solids and bulk materials as well as suitable storage containers such as customised shelves, tank farms or silo systems. We check and control among other things the compatibility of the substances, the effect of environmental influences as well as the conformity with legal requirements. We ensure compliance with various regulations such as the German Water Resources Act (WHG) or Explosive Atmospheres Directive (ATEX) by means of temperature-controlled storage tanks and the blanketing of the relevant substances by means of nitrogen, dry air or gas displacement systems or their circulation via agitators or circulation.
Request for a quoteWACHSFABRIK SEGEBERG GMBH
Germany
We offer you the filling of your products With our production technology, we are able to meet almost all requirements and have appropriate filling facilities for: Tubes, bottles, cans, jars, canisters, barrels, pails, containers (including IBCs) Take advantage of our expertise in the filling of a wide variety of products. We react quickly, flexibly and precisely to changing requirements with well-organised processing times and reliable scheduling.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FLUX-GERÄTE GMBH
Germany
The Drum pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel (316 Ti resp. 1.4581). The pump is also available as FOOD and 3A certified version and complies with international safety standards. Benefits: - Ideal as hygienic pump - Can be quickly and easily taken apart for cleaning - All parts in contact with the medium can be sterilized - Transfers also fluids containing solids such as juices with pulp or soups with spices - Available with different connection at the pressure side (e.g. Clamp 1 1/2" or RD 58x1/6) - Available with 3A Certificate - Available as FOOD version - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21
Request for a quoteFLUX-GERÄTE GMBH
Germany
The horizontal Drum and container pump F 430 TR is ideal for conveying media from IBCs, tanks and other containers with low level outlet. E.g. if a tank is not accessible from the top, or if the spatial conditions do not allow use of a vertical pump. For cleaning, the pump can be easily and quickly taken apart in its two main components. The pump is available in stainless steel or polypropylene. The stainless steel version can also be used in hazardous areas. Benefits: - For containers with floor drain - Provides highest flexibility in installation and mobility - Can also be used at low ceiling heights - Stainless steel version for use in hazardous areas - Can also be integrated into pipe systems - A horizontal centrifugal pump that can be used with different FLUX motors
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pump F 430 PP 100/50 in polypropylene was designed for higher delivery pressure. Instead of a rotor, it is equipped with an impeller in a pump housing. In connection with the powerful FLUX motors the pump delivers a far higher pressure of over 3 bar compared to pumps with semi-axial rotors. This makes it especially convenient for conveying media out of e.g. IBCs and other containers into higher lying pipe systems or out of an IBC in the basement to a higher floor. Benefits: - The pump has a significantly higher delivery head in the range up to 40 l/min compared to pumps with half-axial rotor (Z-rotor) - Allows the conveying of media out of an IBC stock in the basement into higher floors - Ideal for pumping media into a higher lying pipe system - Can be used as a supply pump of line networks e.g. for feeding of process water
Request for a quoteBALLERSTAEDT & CO. OHG
Germany
The hand-held sealer is ideally suited for the sealing of IBCs (Intermediate Bulk Containers) and container mouths. efficient one hand sealing head digital temperature control unit with error report table top support with hanging device
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
Fully automatic labelling machine for labelling drum pallets IBC Conatiner All chemicals are subject to mandatory classification and labelling before they are placed on the market. Often, several labels (product label, hazardous goods label and logistics label) are used up on the containers or drum pallets. Labelling can take place in a continuous flow or at a standstill. Vacuum belts are used for transferring labels to the drum, which can process different label sizes with the appropriate special vacuum plate. The IBLM labeller can be used as a stand-alone labeller or integrated into existing production lines and filling lines.
Request for a quoteFRICKE ABFÜLLTECHNIK GMBH & CO. KG
Germany
A filling station with electronic scale for the filling of viscous to pasty liquids e.g. paints. varnishes or dispersions, adhesives, bitumen. For the filling of open containers, such canisters, open lidded drums or IBCs (Intermediate Bulk Container), directly on the pallet. Above level filling coarse/fine. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. The System offers you: ■ calibrated above level filling of several containers on one pallet ■ thread-cutting, non-dripping filling valve ■ fast and easy valve cleaning (the produkt contact area is made of 3 parts) ■ a rapid changeover to other container sizes and changing products ■ simple operation by one person ■ Handling of empty containers (lifting heavy loads (filled containers)) not applicable
Request for a quoteFRICKE ABFÜLLTECHNIK GMBH & CO. KG
Germany
A filling station with electronic scale for the filling of non-frothing liquids e.g. chemical liquids or oils. For the filling of open bunghole containers, such as canisters, bunghole drums or IBCs (Intermediate Bulk Container), directly on the pallet. Below bunghole filling coarse/fine, no dripping of the filling material after transfer. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. The System offers you: ■ an almost froth-free, calibratable below bunghole filling of several containers on one pallet ■ fast and easy valve cleaning (the produkt contact area is made of 3 parts) ■ rapid changeover to other container sizes and changing products ■ simple operation by one person ■ Handling of empty containers (lifting heavy loads (filled containers)) not applicable
Request for a quoteFRICKE ABFÜLLTECHNIK GMBH & CO. KG
Germany
A filling station with electronic scale for the filling of viscous to pasty liquids e.g. paints. varnishes or dispersions, adhesives, bitumen. For the filling of open containers (min. Ø 150mm opening) just above fill level, e.g. canisters, open lidded drums or IBCs (Intermediate Bulk Container), directly on the pallet. above level filling coarse/fine. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. The System offers you: ■ calibratable above tevel filling just above the fill level with a ride-on valve of several containers on one pallet ■ fast and easy valve cleaning (the produkt contact area is made of 3 parts) ■ a rapid changeover to other container sizes and changing products ■ simple operation by one person ■ handling of empty containers (lifting heavy loads (filled containers)) not applicable ■ automatic height adjustment and automatic change of position
Request for a quoteH. TIMM ELEKTRONIK GMBH
Germany
The danger of electrostatic charges must always be observed when loading, unloading or handling bulk solids or inflammable liquids in the petrochemical, chemical, gas, as well as in the food and feed industry. For application with containers, IBCs, barrels or trays, the EKX-4 (2-pole) is the Grounding Control Device to choose. APPLICATION AREAS: EKX-4 (2-pole) is mounted stationary, close to the loading/unloading gantry. It is used in gas and dust hazardous areas of zone 1 and 21 for objects to be grounded, that cannot be detected by the standard 1-pole Grounding Control Device EKX-4 such as containers, IBCs or barrels. Further areas of application are the grounding of materials handled with trays on conveyors in automated industrial processes.
Request for a quoteBALLERSTAEDT & CO. OHG
Germany
The hand-held sealer is ideally suited for the sealing of IBCs (Intermediate Bulk Containers) and container mouths. • efficient one hand sealing head • digital temperature control unit with error report • table top support with hanging device
Request for a quoteResults for
Ibc containers - Import exportNumber of results
28 ProductsCountries
Company type
Category