Hole edge - Import export

Micron hand tools are made of high quality stainless steel material. Remember to use a plastic mallet, not a steel hammer.

Polished barrel with hardened cutting edge. Hole tapers inside for easy punching clearings. Available in 2 sizes. These punches should be used on an Micron Cutting Board.. The use of an Micron wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Perforated gravel retainer L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

SPIROL Standard Slotted Spring Pins SPIROL Standard Slotted Spring Pins have a slot width narrower than the wall thickness and thus do not nest or interlock. This feature, combined with a smaller expanded (pre-insertion) diameter, results in a number of advantages for SPIROL Standard Slotted Pins compared to ISO 8752 pins including: • Lower insertion force and smoother insertion. • Rounder pins, which in turn results in better conformance of the pin to the hole wall and eliminates the edge of the slot damaging the hole during insertion. • Lower stress in the spine of the installed pin. This results in longer pin life in shock or fatigue applications. • Ability to use automatic vibratory feeding of pins for installation without interlocking. • Plating of pins for additional corrosion resistance or appearance without “touch marks” or the bonding of nested pins. Please visit www.SPIROL.com to learn more!

The Series 500 Extra Light Duty Coiled Pins were specifically designed for use in soft or fragile materials. The 1½ coil formation ensures that the radial force exerted against the hole wall does not exceed the strength of the hole material to prevent deformation. These pins are also an economical solution where pin strength is not a major design consideration. Typical applications for Series 500 Extra Light Duty Pins include: hinge pins in plastic or ceramic assemblies, alignment pins, and fastening applications where the hole is close to an edge of an assembly component.

SPIROL's Series 600 Superflex Coiled Pin has a loosely wrapped outer coil and a diameter at 90° to the seam equal to the hole size to provide a low insertion force and enhanced flexibility after insertion. The Superflex Pin eliminates insertion problems associated with hardened holes with sharp edges. A Superflex Coiled Pin is not distorted during insertion and maintains its straightness. One example of a great application for the Superflex Pin is when the pin is inserted into a shaft with both ends exposed for engagement into a slotted clutch component.

Features • A single solution for everything: Building authority approval for cracked & uncracked concrete, perforated and solid masonry and additional reinforcement connections • LEED and emission tested: for ecological and healthy living • Usual threaded rods* can be used • Earthquake tested C1 • Processing even possible at extremely low temperatures (down to -10° C) • Can be used in wet and water-filled drill holes • Small axis and edge distances for anchoring without spreading pressure • Fixing of high loads weighing up to 13.3 tonnes • Can also be processed overhead • Reuse of the broken cartridge by changing the static mixer • Variable anchoring depth – saves time and material *according to Approval Description & Area of Application • Liquix Pro 1 is a styrene-free, vinylester injection mortar available in various cartridge types and cartridge sizes with static mixer Liquix Mix • For approval-relevant fixings in cracked and uncracked concrete and masonry

43mm x 22mm ZIRCONIA CERAMIC 3-hole Slitter Blades * Blades are 0.3mm thick, also known as “3-hole slitters” * Double edged * Used in film, foil, paper slitting, and other precision applications. * Ceramic slitter blades are designed for high performance industrial applications. Also available in the slotted style to meet your slitting and converting needs. Precision manufacturing: Cylindricity up to 0.004mm, linear tolerance up to 0.001mm, dimensional accuracy up to 0.001mm, thread minimum machinable internal thread M2, thickness up to 0.02mm, concentricity up to 0.003mm, minimum aperture up to 0.07mm...And other parameters. * The durability and performance of Zirconia ceramic is unmatched, they will last 20-30 times longer than other types of blades and are extremely hard, sharp and wear resistant.

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

At X-Keen Blades BV, we pride ourselves on being a premier wholesaler of high-quality industrial blades and cutting tools. Our extensive product range includes tungsten carbide blades, steel blades, wolfram knives, and bespoke blades, all designed to meet the exacting standards of various industries. Whether you require plotter blades for precision cutting, slitting blades for packaging machinery, or blades and knives tailored for solar panels and paper slitting, we have the expertise and products to meet your needs.

ECKOLD Handformer HF 100 for stretching, shrinking, notching, hole punching, edging and clinching. The HF 100 makes forming easy, as it does away with time-consuming hammer beating. The HF 100 is able to stretch and shrink sheet metal and profiles up to 1.5 mm (steel) or 2.0 mm (Aluminium) in thickness. The Handformer is a stationary machine with a throat depth of up to 100 mm, and is mainly used in trade workshops. Apart from standard forming tools, ECKOLD offers tool inserts for notching, hole punching and edging as well as for clinching. • Adjustable working height • Quick tool change • Tool storage trays • Stop for precision guidance of workpieces • Also available with PA 80 pneumatic drive unit For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Contact us for a customised offer, tools included!

ECKOLD Handformer HF 100 PA for stretching, shrinking, notching, hole punching, edging and clinching. When working with the HF 100 PA, you can use both hands to hold and guide your workpiece, while the precision strokes are triggered with a foot pedal. The Handformer HF 100 PA is therefore the ideal device for the forming of large, unwieldy workpieces. The machine is pneumatically driven and features a pressure control device to prevent tool overload. Each machining process is actuated by pressing the foot switch, whereby the stroke force is proportional to the force applied to the pedal. • Adjustable working height • Quick tool change • Tool storage trays • Stop for precision guidance of workpieces For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Contact us for a customised offer, tools included!

Master FRESH ECO LINE floor cleaning cloth is made of 100% high-quality cotton. Cotton is a completely natural and environmentally friendly material that does not cause allergies. Ultra-soft; wear-resistant; perfectly absorbs moisture and dries quickly; easy to wring; does not leave fibers; XXL-size 100*75cm; can be used with household detergents, including chlorine; can be washed in the washing machine at t no higher than 30°C; recommended to use together with the MOP Master FRESH, simply wrap the platform with the cloth and slide the edges into the holes on the platform; yellow color of the cloth during the use is allowed , it completely proves the naturalness of the raw material from which made the cloth, the color does not affect the performance properties of product.

Thread standard: Metric, ISO DIN 13 Type: Hexagon die nut Application: General use Material of product: HSS Spiral entry: no For materials: Non abrasive materials Tensile strength up to: 800 N/mm2 Standard: DIN 382 Tolerance: ISO-6g For repairing and cleaning of damaged threads. For use in awkward places. The hexagon die nut is particularly advantageous for repairs, as it can be moved with ring or open-end spanners, making it easier to reach inaccessible places. Thiscutting tool has an external hexagon and - depending on the size - has three or more cutting edges inside. The holes between the cutting edges take up the chips, roll them and carry them away. Hexagonal die nuts are used to cut screws, nuts and threaded rods in everyday use.Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials

Thread standard: Metric, ISO DIN 13 Type: Round die Application: d25x9 Material of product: HSS Spiral entry: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 750 N/mm2 Standard: DIN 223 Tolerance: ISO-6g Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials

Thread standard: Metric, ISO DIN 13 Type: Round die Application: Undersized diameter Material of product: HSS Spiral entry: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 750 N/mm2 Standard: DIN 223 Tolerance: ISO-6e Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads.

Thread standard: Metric, ISO DIN 13 Type: Round die Application: For brass Material of product: HSS Spiral entry: yes For materials: Brass (short and long chipping) Tensile strength up to: Standard: DIN 223 Tolerance: ISO-6g Special geometry for brass. Lapped for sharp cutting edges, smooth surface and increased tool life time. Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads.

Thread standard: Metric, ISO DIN 13 Type: Round die Application: For stainless steel Material of product: HSSE Spiral entry: yes For materials: Stainless steel (INOX, V2A, V4A etc.) Tensile strength up to: 1200 N/mm2 Standard: DIN 223 Tolerance: ISO-6g Special geometry for Stainless steel. Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads.

Thread standard: Metric, ISO DIN 13 Type: Round die Application: General use Material of product: HSS Spiral entry: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 750 N/mm2 Standard: DIN 223 Tolerance: ISO-6g Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads.

Round die. Metric, ISO DIN 13. HSSE. DIN 223. Tolerance ISO-6g. For high-tensile materials. Up to 1200 N/mm2. Professional thread cutting Thread standard: Metric, ISO DIN 13 Type: Round die Application: For high-tensile materials Material of product: HSSE Spiral entry: yes For materials: Tensile strength up to: 1200 N/mm2 Standard: DIN 223 Tolerance: ISO-6g Special geometry for high-strength material. Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut.