Hole edge - Import export

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Perforated gravel retainer L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

SPIROL Standard Slotted Spring Pins SPIROL Standard Slotted Spring Pins have a slot width narrower than the wall thickness and thus do not nest or interlock. This feature, combined with a smaller expanded (pre-insertion) diameter, results in a number of advantages for SPIROL Standard Slotted Pins compared to ISO 8752 pins including: • Lower insertion force and smoother insertion. • Rounder pins, which in turn results in better conformance of the pin to the hole wall and eliminates the edge of the slot damaging the hole during insertion. • Lower stress in the spine of the installed pin. This results in longer pin life in shock or fatigue applications. • Ability to use automatic vibratory feeding of pins for installation without interlocking. • Plating of pins for additional corrosion resistance or appearance without “touch marks” or the bonding of nested pins. Please visit www.SPIROL.com to learn more!

The Series 500 Extra Light Duty Coiled Pins were specifically designed for use in soft or fragile materials. The 1½ coil formation ensures that the radial force exerted against the hole wall does not exceed the strength of the hole material to prevent deformation. These pins are also an economical solution where pin strength is not a major design consideration. Typical applications for Series 500 Extra Light Duty Pins include: hinge pins in plastic or ceramic assemblies, alignment pins, and fastening applications where the hole is close to an edge of an assembly component.

SPIROL's Series 600 Superflex Coiled Pin has a loosely wrapped outer coil and a diameter at 90° to the seam equal to the hole size to provide a low insertion force and enhanced flexibility after insertion. The Superflex Pin eliminates insertion problems associated with hardened holes with sharp edges. A Superflex Coiled Pin is not distorted during insertion and maintains its straightness. One example of a great application for the Superflex Pin is when the pin is inserted into a shaft with both ends exposed for engagement into a slotted clutch component.

Features • A single solution for everything: Building authority approval for cracked & uncracked concrete, perforated and solid masonry and additional reinforcement connections • LEED and emission tested: for ecological and healthy living • Usual threaded rods* can be used • Earthquake tested C1 • Processing even possible at extremely low temperatures (down to -10° C) • Can be used in wet and water-filled drill holes • Small axis and edge distances for anchoring without spreading pressure • Fixing of high loads weighing up to 13.3 tonnes • Can also be processed overhead • Reuse of the broken cartridge by changing the static mixer • Variable anchoring depth – saves time and material *according to Approval Description & Area of Application • Liquix Pro 1 is a styrene-free, vinylester injection mortar available in various cartridge types and cartridge sizes with static mixer Liquix Mix • For approval-relevant fixings in cracked and uncracked concrete and masonry

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

ECKOLD Handformer HF 100 for stretching, shrinking, notching, hole punching, edging and clinching. The HF 100 makes forming easy, as it does away with time-consuming hammer beating. The HF 100 is able to stretch and shrink sheet metal and profiles up to 1.5 mm (steel) or 2.0 mm (Aluminium) in thickness. The Handformer is a stationary machine with a throat depth of up to 100 mm, and is mainly used in trade workshops. Apart from standard forming tools, ECKOLD offers tool inserts for notching, hole punching and edging as well as for clinching. • Adjustable working height • Quick tool change • Tool storage trays • Stop for precision guidance of workpieces • Also available with PA 80 pneumatic drive unit For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Contact us for a customised offer, tools included!

ECKOLD Handformer HF 100 PA for stretching, shrinking, notching, hole punching, edging and clinching. When working with the HF 100 PA, you can use both hands to hold and guide your workpiece, while the precision strokes are triggered with a foot pedal. The Handformer HF 100 PA is therefore the ideal device for the forming of large, unwieldy workpieces. The machine is pneumatically driven and features a pressure control device to prevent tool overload. Each machining process is actuated by pressing the foot switch, whereby the stroke force is proportional to the force applied to the pedal. • Adjustable working height • Quick tool change • Tool storage trays • Stop for precision guidance of workpieces For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Contact us for a customised offer, tools included!

Whether as electrical isolator or sensor-feed-through, our thin glass plates with defined edge- and inner hole-processing are suited ideally. The reason for this are the specific glass-characteristics. The high electrical insulation value or the high transparency of glass make use of its advantages. Always customized on your application!

Application of pneumatic round hole puncher: The hole puncher is pneumatic type, usually should be installed on bag making machine and punch euro hole for plastic or paper bag. It is 15mm circle hole puncher with 50mm passing slot length. Passing Slot (throat depth) means the space to pass bag (from hole center to inside edge). The main hole shapes we made for aluminum foil bag, foil ziplock bag , food packaging bag , grape bags and stand up pouches are: Euro hole puncher, Butterfly hole puncher, Round hole puncher, Triangle hole puncher, Die-cut hole puncher, Handle hole puncher, Tear notch puncher and so on. Any hole size and shape can be customized. Punching materials are: PO, PP, PE, OPP, CPP,PVC, PPE, PPU, CPE plastic material, paper , laminated materials,non-woven and so on.

Application of pneumatic triangle hole puncher: The hole puncher is pneumatic type, usually should be installed on bag making machine and punch triangle hole for plastic or paper bag. It is 30x30x40mm hole puncher with 140mm passing slot length. Passing Slot (throat depth) means the space to pass bag (from hole center to inside edge). The main hole shapes we made for aluminum foil bag, foil ziplock bag , food packaging bag , grape bags and stand up pouches are: Euro hole puncher, Butterfly hole puncher, Round hole puncher, Triangle hole puncher, Die-cut hole puncher, Handle hole puncher, Tear notch puncher and so on. Any hole size and shape can be customized. Punching materials are: PO, PP, PE, OPP, CPP,PVC, PPE, PPU, CPE plastic material, paper , laminated materials,non-woven and so on.

Application of pneumatic handle hole puncher: The hole puncher is pneumatic type, usually should be installed on bag making machine and punch handle hole for plastic or paper bag. It is 80x20 mm carry hole puncher with 50mm passing slot length. Passing Slot (throat depth) means the space to pass bag (from hole center to inside edge). The main hole shapes we made for aluminum foil bag, foil ziplock bag , food packaging bag , grape bags and stand up pouches are: Euro hole puncher, Butterfly hole puncher, Round hole puncher, Triangle hole puncher, Die-cut hole puncher, Handle hole puncher, Tear notch puncher and so on. Any hole size and shape can be customized. Punching materials are: PO, PP, PE, OPP, CPP,PVC, PPE, PPU, CPE plastic material, paper , laminated materials,non-woven and so on.

Application of pneumatic Euro slot hole puncher: The hole puncher is pneumatic type, usually should be installed on bag making machine and punch euro hole for plastic or paper bag. It is 30x6x9mm hole puncher with 50mm passing slot length. Passing Slot (throat depth) means the space to pass bag (from hole center to inside edge). The main hole shapes we made for aluminum foil bag, foil ziplock bag , food packaging bag , grape bags and stand up pouches are: Euro hole puncher, Butterfly hole puncher, Round hole puncher, Triangle hole puncher, Die-cut hole puncher, Handle hole puncher, Tear notch puncher and so on. Any hole size and shape can be customized. Punching materials are: PO, PP, PE, OPP, CPP,PVC, PPE, PPU, CPE plastic material, paper , laminated materials,non-woven and so on.

Application of pneumatic tear notch hole puncher: The hole puncher is pneumatic type, usually should be installed on bag making machine and punch V-cut tear notch for plastic or paper bag. It is V2x4mm hole puncher with 100mm passing slot length. Passing Slot (throat depth) means the space to pass bag (from hole center to inside edge). The main hole shapes we made for aluminum foil bag, foil ziplock bag , food packaging bag , grape bags and stand up pouches are: Euro hole puncher, Butterfly hole puncher, Round hole puncher, Triangle hole puncher, Die-cut hole puncher, Handle hole puncher, Tear notch puncher and so on. Any hole size and shape can be customized. Punching materials are: PO, PP, PE, OPP, CPP,PVC, PPE, PPU, CPE plastic material, paper , laminated materials,non-woven and so on.

Application of pneumatic rounded corner hole puncher: The hole puncher is pneumatic type, usually should be installed on bag making machine and punch rounded corner for plastic or paper bag. It is R15 rounded corner hole puncher with 50mm passing slot length. Passing Slot (throat depth) means the space to pass bag (from hole center to inside edge). The main hole shapes we made for aluminum foil bag, foil ziplock bag , food packaging bag , grape bags and stand up pouches are: Euro hole puncher, Butterfly hole puncher, Round hole puncher, Triangle hole puncher, Die-cut hole puncher, Handle hole puncher, Tear notch puncher and so on. Any hole size and shape can be customized. Punching materials are: PO, PP, PE, OPP, CPP,PVC, PPE, PPU, CPE plastic material, paper , laminated materials,non-woven and so on.