Functional testing - Import export

readycable® harnessed cables are ready-to-connect cables for use in energy chains®. As manufacturer and harnesser, igus® provides everything from a single source, thus reducing throughput times and the number of suppliers. The portfolio includes an extensive range of catalogue products, including cables harnessed according to manufacturers' standards and diverse industrial standards as well as individual singly or series produced components. Numerous types of cable of different qualities, with different approvals and with different certifications of conformity are available to choose from. All components are subjected to extensive quality checks and functional tests.

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Our services •Layout creation •Material procurement •SMD assembly •Manual and semi-automatic •Mounting •Reflow and wave soldering •Selective soldering •Automatic Optical Inspection (AOI) •X-ray inspection •System assemblies •In circuit tests and •Function test •Revision and repair •Rework Station •Short delivery times

We offer our customers an "all-in-one" service at the highest level: from profiles to assembly, right up to integrated system solutions. SCHOCK has extensive expertise in the assembly and manufacturing of complex assemblies. As a result, our customers can source a fully assembled assembly from SCHOCK instead of multiple individual components. They benefit from our manufacturing facilities with experienced teams in assembly, surface finishing, quality assurance, and logistics. Service Overview: Assembly of complex assemblies Joining, welding, connecting Punching, embossing, and bending technology Surface finishing Integrated functional testing Procurement of purchased parts Packaging and logistics

The robust and reliable gas detector Triple Plus-IR of Crowcon provides effective protection against up to four gases of various dangerous gases at the same time. With the help of modern pump technology and hydrocarbon- infrared- recognition for measurement of hydrocarbons (in the unit measurement % LEL and vol.%), it is especially adventurous for monitoring of inert atmospheres (e.g. tank cleaning) Features of Triple Plus-IR Permanent display up to 4 gases in real time at the same time. Shock- and waterproof Self test of all functions of sensor, battery, electronic and acoustic/optical alarm Bright, wide-angle flashing alarm display Free adjustable alarm points Integrated gas probe pump with reliable membrane technology PC- interface for configuration of device Technical data of Triple Plus-IR Size (cm): 11,8 x 16,7 x 7,3) Weight (g): 900 Application temperature: -20 up to +50°C Alarm: optical, vibration and acoustic (95dB) low, high, Stel, MAK, OL (exceedance of measuring...

With the robust and reliable gas detector GasAlertMicro5 of BW-Technologies, it is possible to measure and to control up to five dangerous gases at the same time. Thanks to intelligent, integrated pump technology (optional) long distance samples in containers or enclosed rooms are possible, and is suitable for a broaden range of industrial applications. GasAlertMicro5 is available as standard version for toxic and flammable gases, as well as PID version for detection of volatile organic compound or as IR-version for detection of carbon monoxide. Features of GasAlertMicro5 Permanent display up to 5 gases concentrates in real-time at once Impact- and water-resistant Self-test of all functions for sensors, battery, electronic and acoustic / visual alarm Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Free adjustable alarm points Integrated gas sampling pump with reliable membrane technology Setting of various languages...

GasAlertMicroClip is called now: GasAlertMicroClip XL with improved technology. In future, this device shows its correct operation function by a green flashing light. Newly li-ion battery was developed for a longer service life for over 2 years The handy and compact multigas detector of BW-Technologies provides protection effectively up to 4 dangerous gases at once. Due to single-button operation it provides easy handling and therefore it reduces time while briefing its user. Features of GasAlertMicroClip: Service life: 2 years Permanent display up to 4 gases concentrates in real-time at once Impact- and water-resistant Self-test of all functions for sensors, battery, electronic and acoustic (95dB)/ visual alarm Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Compatible with BW-MicroDock II Free adjustable alarm points Setting of various languages (German, English, French, Spanish, Portuguese Technical Data Size (cm): 10.8...

With the simple, robust and maintenance-free single gas monitor GasAlertClip Extreme of BW-Technologies a reliable monitoring and detection is secured (e.g. personal security) of all threats by single gases, whereby the measured value is displayed in real-time. The operating time is limited to 2 years and absolutely maintenance-free, batteries neither need to be charged nor to be exchanged. Thanks to simple operation time exposure reduces considerably, therefore this device is excellently suitable for industrial applications. Features of GasAlertClip Extreme: Large LCD-display indicates remaining operation lifetime in months, days, and hours Impact- and water-resistant Self-test of all functions of sensor, battery, electronic and acoustic/ optical alarm Compatible with the automatic testing station “BW-MicroDock II” Bright, wide-angles blinking alarm display With integrated vibration alarm for surroundings with higher noise level Daily self-test activated by user Recording and...

With the simple, handy and robust single gas monitor GasAlertExtreme of BW-Technologies a reliable monitoring and detection is secured (e.g. personal security) of all threats by single gases, whereby the measured value is displayed in real-time. A broaden range of user options as multilingual display, data recording function and the comprehensive range of models for toxic gases make the device to an ideal solution for many areas of application. Features of GasAlertExtreme: Permanent displays of measurement values in real-time (LCD display) Self-test of all functions for sensors, battery, electronic and acoustic / visual alarm Impact- and water-resistant Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Free adjustable alarm points Setting of various languages (German, English, French, Spanish, Portuguese) Technical data of GasAlertExtreme: Dimension (cm): 2.8 x 5.0 x 9.5 Weight (g): 82 Application temperature: -20 + 50...

The optionally available FANh2 software offers comprehensive conveniences as built–in breath test definitions, timer functions, clearly arranged representation of measurement results and report templates. The WINDOWS® software can be connected to practise or hospital EDP systems via standard data interfaces like GDT, HL7 or ASTM easily. Printout examples: Excel template Word template Built–in report

The FAN ci2 is a highly sensitive analysis instrument for the determination of the ratio of the stable isotope 13C and 12C in the CO 2 of respiratory gases. The field of application for the device are all diagnosis techniques in which tracer substances marked with the 13C stable isotope are catabolized and finally expelled through respiration. The 13C breath test analyzer FAN ci2 can be equipped with a highly stable dual beam infrared spectrometer module. So this device with its 8 or 16 ports is suitable both for medical routine diagnostics and for long term measurements with high demands for precision and stability. The included FANci–software for measuring and interpretation supports all current operating systems of the connected PC. You are free to select from more than 20 integrated breath tests, e.g. Helicobacter pylori test, liver function test, or measuring intestinal transit time. FAN ci2 is the ideal device for physicians’ office laboratories as well as for scientific institutes. Special features simple and save handling small sample volume (approx. 100ml) high performance (approx. 30 samples/h) high repeatability (standard deviation < 0.5‰) low servicing by internal checks of system status wide field of application by flexible adaptation to special questions Fields of application Medicine diagnostic studies for Helicobacter–gastritis investigation of aminoacid metabolism monitoring the circulation of bile acid detection of fat malabsorption indication of bacterial overgrowth in the jejunum specific liver function tests measurement of gastric emptying rate of solids determination of the lactase activity with 13C labeled cornstarch test of the pancreas function with the lipase enzyme Animal nutrition and biochemistry utilisation of feedstuff dynamics of metabolism Operating principle The principle of measurement is based upon the specific absorption of infrared light in the middle of the infrared spectrum between 2 and 8µm wave length (NDIR: Non Dispersive Infrared Spectroscopy). The high selectivity of the infrared detectors is obtained by filling themselves with the corresponding components, 13CO 2 and 12CO 2 respectively. The cross sensitivity of 13CO 2 to the high 12CO 2 concentrations is reduced by using a 12CO 2 gas filter in the 13CO 2 channel and mathematical hods. To yield the high accuracy the temperature is stabilized by thermostat and the system is closed to the environment. Software The control of the FAN ci2 is realized by the FANci WINDOWS®–software that guarantees an easy handling of the analyzer system and a clearly arranged representation of the results of measurements. So the user is informed about the progress of the measurements at any time. All controls needed for the routine procedures of the FAN ci2, as recording of sample data, start of measurement, evaluation and documentation of the results are easy available. All relevant system parameters are observed continuously and any disturbances in the process reported immediately. By selecting only a few system parameters, the FAN ci2 is adaptable to different questions. Via standard data interfaces like GDT, HL7 or ASTM the software can be connected to practise or hospital EDP systems easily. System configuration The FAN ci2 only consists of one unit that includes the acquisition unit and the gas management system. The gas sample–ports for the breath bags are located in front of the device. There are only two connections necessary: the power supply and the connection to the Personal Computer. The software communicate with the components of the device via USB. Simple and secure handling by in the hardware integrated sample recognition system compact design and neat layout of controls internal control with fail-save CAN bus heated gas path to eliminate residual moisture low stoppage times and service costs by internal status checks for early failure diagnosis Optical system with integrated thermostat, optimized for the measuring process new efficient IR–sources modified light modulation, optimized to the signal processing and, due to this markedly smoother output signal with lower drift insensitive to nuisance gases by higher selectivity