Welding equipment - Import export

Robust and maintenance-free 90° magnetic clamping angle for flat material. The permanent magnet welding angle is a classic from Assfalg for welding and assembly work on flat material. It is available in two sizes, with a base length of 200mm and 300mm.

Each side can be switched separately with this magnetic welding angle. They are suitable for round and flat material. Metal workpieces can be held at 90° with this durable and maintenance-free welding angle. Workpieces can be easily positioned, aligned and fastened.

These ferrous welding angles are your indispensable third hand during welding and assembly work on round and flat material. With these small and handy ferrous welding angles, metal workpieces can be held at angles of 45° and 90°. They are durable, maintenance-free and can be used with a temperature of up to 80 °C. Workpieces can be easily positioned, aligned and fastened.

The Pivot magnetic welding angle has a holding angle range from 28 to 270 degrees. The Pivot magnetic welding angle is a universal handyman for smaller welding and assembly work on round and flat material. Through the quick release and a scale, the angle can be set simply and precisely. Components can be clamped on the inside or outside. Each leg can be switched on and off through a rotary switch.

Fixed 90° welding angle with two switchable and removable magnet modules that can be used separately as well. The A90 can be used for aligning heavy and larger steel plates with precision in a 90° angle. This magnetic welding angle can be used as an inside and outside angle. Magnet modules can be removed and used separately. A total of four versions can be chosen from, which are different in their holding forces. Magnetic welding angles with rotating magnetic modules that can be completely shut off. Your compact helper for welding or assembly works, for round and flat materials. The angles can be set exactly using the engraved scales. The Boomer magnetic welding angles from Assfalg are available in 3 different sizes, which are different significantly in their holding forces. They make it possible to align heavy and larger workpieces both on the inner and on the outer side and to clamp them accurately.

These magnet welding angles can be gradually adjusted in their angle from 30° to 275°. Every leg can be switched separately. These magnet clamping angles hold round and square tubes and flat material secure. Thanks to the engraved scale and the quick release, the angles can be quickly and precisely set.

The Magsquare represents a universal welding and assembly aid. The magnetic force acts on 3 sides. The system can be switched off through a simple 180° rotation of the switch lever. It can also be used as an addition to the magnetic welding angles A 90 and Boomer. Several thread drill holes are already present as mounting options. Four versions can be chosen from, which are different in their holding forces and dimensions. The magnet squares are suitable for round and square workpieces.

With high demands on accuracy and dynamics, the base frame in welded construction or hard stone is also a possible and reasonable part of the scope of supply. Here, all axes are specified, assembled, aligned, measured, tested and recorded - according to desired specifications. By means of hard stone, the required accuracies can be achieved. Hard stone offers all the characteristics required - ranging from a small coefficient of expansion, high abrasion resistance, optimum vibration damping, absence of unwanted residual stresses up to the necessary accuracies regarding flatness, parallelisms and angularity.

Stampling device for welding work ■ positioning, centering & clamping of metal part, with integrated part scanning The individuel customized solution will be performed according to customer specification!

Swept outlet similar to ANSI B 16.19 / ANSI B 36.10 Swept outlets in pipeline construction A swept outlet is used in pipeline construction just like a welding outlet, a socket welded outlet or a threaded outlet for a 90 ° branch. A swept outlet is an alternative to the T-piece / red. In comparison to the T-piece / Red.Tee, the installation effort for a swept outlet is lower because only one hole has to be drilled into a pipe. The swept outlet can then be welded into this hole. A swept outlet differs from a welding outlet in the type of welding. While a welding outlet is only placed on the run pipe and then welded, a swept outlet is welded directly into the run pipe. Ideal stress distribution Swept outlets were developed in order to achieve the best possible stress distribution for internal pressure and pipe forces. Due to the favorable voltage level, swept outlets are often used in highly stressed pipes in the oil and gas industry.

Numerous designs available at short notice Support-free assembly Nipple outlets (MSS SP 97) have been specially developed for support-free assembly. Nipple outlets are available with different ends. Smooth or beveled ends are used for welded connections, while the ends have an external thread for screw connections. We can deliver nipple outlets with NPT thread according to ASME B1.20.1 from our warehouse. We can deliver nipple outlets with BSP / T threads according to ISO 7-1 and BSP / P threads according to DIN ISO 228 with short delivery times. Standards and special requests We deliver nipple outlets in different wall thicknesses (STD, XS, S 160 & XXS and special wall thicknesses) as well as in all common materials. If required, we can also supply special materials. Technical specifications You can find more details, technical data and dimensions in our data sheet "Nipple outlet" in the download area.

Numerous designs available at short notice Branch connections on straight pipe sections Lateral outlets are used for 45 ° branches on straight pipe sections. Other departure angles are possible on request. Standards and special requests We deliver lateral outlets in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. Technical specifications You can find more details, technical data and dimensions in our data sheet “Lateral outlets” in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.

Elbow outlets for 90 ° bends 1.5 D Up to 2 “elbow outlets fit on elbows of all diameters mentioned in our data sheet (see download area). Larger branches are manufactured precisely for the respective arch diameter. Standards and special requests We deliver elbow outlets in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. If required, we can also supply special materials. Technical specifications More details, technical data and dimensions can be found in our data sheet "elbow outlets" in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.

Straight from our warehouse We have around 150 different versions of Socket Weld Outlets (ANSI B 16.11 / MSS SP 97) in our extensive warehouse in Kamen. We can deliver to you at short notice at any time. We only deliver goods of European origin. Standards and special requests We supply socket weld outlets in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. We can also supply special materials on request. Furthermore, socket weld outlets differentiate between reduced and full branches. Express service We can deliver socket weld outlets in stock to the customer within Germany the next day if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service. Technical specifications More details, technical data and dimensions can be found in our data sheet “Socket weld outlets” in the download area. We will be happy to provide you with information on special dimensions and custom-made products on request.

Straight from our warehouse Approx. We always have 150 different versions of threaded outlets (ANSI B 16.11 / MSS SP 97) available in our extensive warehouse in Kamen. In our warehouse we have threaded outlets with NPT threads according to ASME B1.20.1 in stock. Threaded outlets with BSP / T threads according to ISO 7-1 and with BSP / P according to DIN ISO 228 are available with short delivery times. We only deliver goods of European origin. Standards and special requests Threaded outlets are available in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. In the case of threaded outlets, a distinction is also made between reduced and full branches. Express service We can deliver threaded outlets in stock within Germany the next day to the customer if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service.

Straight from our warehouse Approx. We keep 300 different versions of welding outlets (ANSI B 16.9 / MSS SP 97) in our extensive warehouse in Dortmund. We can also supply you at short notice. We only deliver goods of European origin. Standards and special requests We deliver welding outlets in different wall thicknesses (STD, XS, S 160 & XXS and special wall thicknesses) and in all common materials. If required, we can also supply special materials. In the case of welding outlets, a distinction is also made between reduced and full waste. Express service We can deliver welding outlets in stock within Germany to the customer the next day if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service.

ROTAWELD is our platform to cover a wide range of applications requiring circumferential seam welding. The precision servomotor rotation axis combined with our advanced control system form the basis for the production of accurate and repeatable circumferential seam welds. Machine sizes, part holders, welding equipment, torch holders and any additional positional axes are designed specific to the customer and their products.

Schnelldorfer CORNERWELD seam welding machines have been designed to weld sheet metal plates in a 90° joint. The precision clamping system with inert gas coverage and advanced OEM control package precisely controls the welding sequence and weld parameters, resulting in the perfect weld for your corners. CORNERWELD applications include welded corners for food, medical equipment, HVAC drip pans, electrical enclosures, and laboratory furniture. Complex inward and outward flanges can be accommodated with custom made tooling pieces. A wide range of materials can be welded, including Stainless Steel, Carbon Steel and Aluminium. Complete welded parts do not require any costly grinding, polishing or blending thus greatly saving on manufacturing costs.

Welding assembly

Hand riveters are essential tools for anyone who needs to join two materials together permanently. These tools work by compressing a metal rivet through two or more layers of material, creating a secure and permanent bond. Hand riveters are used in a wide range of industries, including construction, metalworking, and automotive repair. They are especially useful when working with materials that cannot be easily welded or screwed together. Equipped with 4 heads of different sizes, Ronix RH-1604 is ready to help you in your next repair or maintenance work.

Tube squaring machines are necessary to achieve burr-free and right-angled seam preparation for orbital welding. That‘s why Orbitec offers two machines, from the small handy Planfix 40 S to the large Planfix 115 S. The Planfix 115 S is a high-performance tube squaring and chamfering device with angle gear for mobile or stationary use with a mains drive. It has a large viewing window, a chip collector and a feed with 0.1mm scale graduation. Optionally, the device can be equipped with a tool carrier and a double-sided indexable insert holder or the well-known Orbitec L facing tool bits. Package includes exemplary for Planfix 115 S Power 230 V: — Tube clamping attachment — Drive — Tool set — Transport box

Water cooling unit for use with the EVO 200 WP or LITE controller and Tetrix 200 in conjunction with water-cooled welding tools.ols. — Standalone or continuous operation possible — Temperature-regulated fan control — Water flow feedback through in-built flowmeter Package includes: — Water cooling unit — Inverter / cooling unit (permanently mounted) connection cable — Fasteners for EVO series — 4 l blueCool 10i-5 coolant

The RBK 60 S is an extremely robust water-cooled weld head for a standard heat exchanger application up to an ID of 60 mm, modified to an ID of 99 mm or 120 mm. The head is pneumatically centred and is available with a rotating wire device and/ or arc voltage control (AVC) as an option. The head can also be used with a pneumatic positioner instead of a balancer. Versions: — RBK 60 S weld head with pneumatic centring, including hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring and wire feeder incl. hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring, wire feeder and AVC incl. hose package, 8m, water-cooled Package includes: — Weld head — Small torch incl. torch consumables and tungsten electrode Ø 2.4 mm — Water-cooled hose package, 8 m — Pull bar B — Transport case Optional: — Div. spring sleeves and pull bar sets for RBK 60 S — Torches, Balancer, Tube-to-tubesheet positioner...

Our latest series of 3 gas-cooled weld heads technical optimized and in an new design covers the tube size ranges from 6mm – 114.3mm / 0.250” - 4.500”. Unique construction and material selection allows a high duty cycle even without water cooling. The weld heads are one of the narrowest on the market and have a ‘quick latch’ system for retaining the collets. For the high duty cycle applications we also offer the gas-cooled S series weld heads in a water-cooled SW-version (the overall width remains unchanged). Full water-cooling of the lower clamp housing. Also available as an upgrade for standard OSK S weld heads. Weld head type \ Field of application mm \ inch \ weight OSK 53 S + SW \ OD 6 - 53mm \ 0.250" - 2.087" \ 2.1kg OSK 76 S + SW \ OD 6 - 76.2mm \ 0.250" - 3.000" \ 2.6kg OSK 115 S + SW \ OD 9.53 - 114.3mm \ 0.375" - 4.500" \ 3.4kg OSK 170 GW \ OD 50 - 168.3mm \ 1.969" - 6.626" \ 7.5kg

Turn table, especially suitable for orbital components with higher quantities and can be connected to all Orbitec controllers. Package includes: — Turning device — 3-jaw chuck — Interchangeable jaws — Chuck key — Durable multi-positional torch arm with central mechanical clamping — Ground cable — Interconnection cable with wire and AVC outlet Special versions available on request.

The EVO Industry 4.0 series is new to the market. Several systems, initially compact as the 200 A Autorange and now also modular in connection with the Tetrix inverters. The systems are small, lightweight and handy and offer a high-resolution colour display, multilingual intuitive user guidance due to a colour touch interface, or alternatively operation using a membrane keyboard, a stable operating system (without data loss during power outages and quickly ready for use again), full access through tablet with QR-code scanner, data transfer via USB, LAN and WLAN, fault analysis program, manufacturer support via remote maintenance, a mountable cooling unit as an option, and many other functions... Connection to Tetrix 200 or Tetrix 351. Compact and light with the external dimensions (L x W x H) 405 x 325 x 170 mm and weighing only 9.7 kg. Optional: — Water Cooling Unit COOL 50 or EVO COOL — EVO Remote Control — Gas Controller Box

Mobile inverter power source for TIG manual or orbital welding with built-in cooling system and gas sensor. Can be used with all Orbitec controllers, particular in high-demand applications such as tube-to-tube-sheet. Technical Data: Output: DC Mains voltage: AC 3 x 400V Mains frequency: 50 / 60Hz Power rating: 15 kVA Generator output: 20.3 kVA Current range: 5A – 350A Welding current: — 60% TIG / MMA: 350A — 100% TIG / MMA: 300A Cooling efficiency: 1500W Water column: 35m / 5l / min. Tank capacity: 12l Weight: 131kg Dimensions (L x W x H): 1100 x 455 x 1000 mm Package includes: — Inverter — Power cable — 10l coolant

The 5th generation of our reliable, tried-and-tested standard controller. Can be connected to Tetrix 200 or Tetrix 351. — 5.7" display — Extremely simple multilingual user guidance thanks to programming support — Monitoring of gas and water cooling — Option of welding in up to SIX sectors, in continuous or step travel mode — Individual modification of the calculated program parameters, also using current percentage button — Graphic display of the welding progress — Real-time monitoring of the welding parameters — Integrated day counter (assignment to isometries and weld joint numbers) ... Package includes: — Controller — Power cable — Controller / power source interface cable — USB stick — 2 pieces tungsten boxes — Pen with touch screen function and LED light Optional: — Cool 50 or EVO Cool cooling unit — AVC upgrade kit — Docutronic 2.2 software for documentation — Orbicontrol 3 remote control — Spare paper rolls, spare ribbon cartridges

The pressure regulator can be tightened by hand without the need for a spanner. It reduces the stored bottle pressure from max. 200bar (on request 300bar) to an outlet pressure which is adjusted at the flowmeter. The flowmeters are used to set the required flow in l/min. Important: The pressure regulator has a constant outlet pressure of 2.5bar which is necessary to protect the gas flow sensor of the orbital unit. Versions: — Special Argon Pressure Regulator with twin flowmeter, brass — Special Pressure Regulator with twin flowmeter for H2-gases, brass — Special Argon Pressure Regulator with triple flowmeter, brass Pressure regulators with different connections and for use with other gas types or nickel-plated version available on request.