Water valves - Import export

It can achieve a cutting depth of up to 155mm. The powerful and lightweight motor paired with the compactness of the machine allows for an excellent weight-to-performance ratio. Starting the machine is also very easy due to its design. Because of the combination of Poly-V belt, maintenance-free DuraStarter, and efficient air filter system the maintenance intervals are extended. Through the progressive water valve, the water supply can be exactly regulated, which makes the dust binding as efficient as possible and the mud formation as low as possible. In conclusion the K 970 is a pretty good choice for a wet cutter.

Sealant and lubricant for cold and hot-water valves in plumbing and heating sector, in vehicle heating systems or cooling circuits, ground seals on glass taps and desiccators For lubricating O-rings and rubber seals during assembly and operation, as well as plastic parts of all kinds Advantages and benefits Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Consistent properties without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol

Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators Lubrication of O-rings and rubber seals for assembly and during operation Lubrication of plastic parts Advantages and benefits NSF H1 registered Tasteless and odourless Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Completely EPDM-compatible High long-term stability without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol MOSH/MOAH-free

Shut off valves suitable for water, petrol and oil application. Very compact construction made of steel or aluminum

TOPAZ differential valves are the ideal valve for water tanks in pressurised systems. The float valve with diaphragm offers a high flow rate of up to 200 l/min. Furthermore, an adjustable level control from 50 mm up to 2500 mm is possible. This minimises the number of start-stop operations of the pump system and ensures minimal pump operation.

Being produced in ELKON’s latest tech production facilities, stationary continuous mixing plants (pugmills) are mainly used for subbase (stabilization) material with / without cement production and RCC concrete for dam or road pavement projects. Equipped with 5000/2500 l. capacity ELKON continuous twinshaft mixer, there two models of pugmill plants, 300 tons/h and 500 tons/h capacity. In this mixing plants, thanks to aggregate bins equipped with dosing belts, it’s possible to adjust material flow rate by means of frequency inverters. Cement flow rate can also be precisely adjusted by a screw equipped with frequency inverter whilst the water flow by a proportional valve. All materials are mixed passing through ELKON C200 mixer continuously according to the recipe and flow speed.

Trotec's most powerful submerged clear water pump TWP 9005 E pumps off up to 14,000 litres of clear to slightly contaminated water per hour. This makes it the perfect partner if you suddenly need to pump large amounts of water off or over quickly and efficiently. It is excellently suited for draining water from pools, for the quick elimination of leakages caused by a defective washing machine or of ground water ingress in basement rooms as well as of water that has penetrated the walls owing to a flood or heavy rainfall. Another possible application would be when work is required in drainage shafts. The maximum delivery head of the TWP 9005 E can amount up to 11.5 metres. An integrated check valve prevents the water from flowing back after switch-off and so reduces the time to restart suction. With its high-performance and maintenance-free 900 W motor the TWP 9005 E pumps off even slightly contaminated water with particle sizes of up to 5 millimetres.

The multiple water quantity control system in modular design that is available in several versions fulfils not less than three requirements at the same time. It combines the advantages of the conventional water distributors, the impulse cooling systems and the continuously operating temperature control units while eliminating the disadvantages of each of these systems. The temperature control system disposes of up to 128 individually adjustable circuits and is suitable for the processing of polyolefins and technical thermoplastic materials. In case of the basic execution (itd B) the requested flow rate is adjusted manually and is then monitored by a flow meter and presented digitally and graphically on the central display of the control unit. In the standard execution (itd R) the water quantity is individually set for each circuit at the central operating unit and - if necessary - is readjusted automatically via a water quantity regulation valve within adjustable limit values.

Butterfly valve type 22.013 for drinking water Use: for drinking water

Main products: Hpb59-1、Hpb58-2A、C3604、C3771、C37700、C36000、C46500、C46400、CZ132、CW602N、Grade A polished copper ingots Product characteristics: Excellent mechanical properties, excellent hot workability, good machinability, excellent resistance to stress corrosion. Applications: Valves, pipe fittings, water heating and sanitary ware, air conditioning components and other hardware Production capacity: 207,000 tons Honorary titles: China's Top 10 Copper Wire & Rod Company, Zhejiang Famous Brand Product, Ningbo Model Unit Manufacturing Enterprise

Compact, lightweight Cuplas with only 9.5mm outer diameter. Pushtoconnect operation. Tube Fitter type for even easier tube insertion. Even though the valve is built in the socket, the sleeve outer diameter is confined to 9.5mm. Pushtoconnect design. Just push in and the tube mount is completed. Compact design for piping in narrow spaces. Plated brass and stainless steel bodies are available for excellent corrosion resistance. Available in various end configurations to satisfy a wide range of pneumatic applications. Fluid will flow out from the plug when disconnected because of no valve inside the plug. If the fluid is water and you require a valve in the plug, ask for semistandard Little Cupla or Compact Cupla series.

• Orifice (DN): 0.6 mm • Pressure range: 0.5 – 10 bar • Operating voltage: 6 VDC • Power consumption: max. 1.4 W • Degree of protection: IP65 Staiger pilot valves are used in order to operate non-contact water taps in energy-saving mode. These valves fitted with microbatteries operate only after being actuated by an electrical impulse. This impulse is triggered by moving your hand in front of the sensor, which triggers the extremely robust pilot valve. After water has been dispensed, the valve returns to its inoperative position. This valve is characterized by robustness, durability and small size. Benefit The low power consumption by the impulse control is ideally suited for use in electronically controlled taps with battery operation. The valve is constructed entirely of water-approved materials and is certified according to KTW, W270, WRAS, ACS and NSF 61.

Suitable for water and glycol. Valve drive with mechanical position indicator and automatic reset. Stainless steel body. Voltage: AC/DC 24 V With 10 m Kabel Protection Code: IP 65

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Water hardness is influenced by changes in raw water, flow, pressure and bypass valve. The continuous monitoring of the water hardness behind a blending system with Softcontrol V-UE is therefore of great importance. The device monitors the limit value of the water hardness of blended water on a water softener approx. Every 30 seconds. The limit value can be parameterized in the range between 18 ppm and 360 ppm. The data is shown on the display, saved on the USB stick and output via a 4 to 20 mA current loop. The integrated ion-selective sensor works without the use of an indicator. Installation is simple, the limit value can be parameterized and the sensor, as the only common spare part, reports that it is easy to replace if necessary.

The European Drinking Water Directive 98/83/EC describes water as our most important good and thus highlights the importance of its protection. Drinking water is of high value as it has a direct impact on human health. For drinking water installations, that means that planning, construction and operation of a drinking water system should not cause illnesses due to mistakes or errors. A regular test for drinking water is prescribed in the Directive 98/83/EC. All member states need to adopt these regulations and should have adjusted them to the state's specific needs and conditions. — made of lead-free brass for sampling all chemical and microbiological parameters — rotable around 360° — chemically and thermally desinfectable/ deflagratable — easy installation — vertical sampling in all installation positions — lead-free body — incl. adapter to 3/8" male thread

— brackets are equipped with cross slots to guarantee an ideal adjustment of the installation set — Length compensation fittings to find the optimum position of the water meter — Screw connections with roughened external thread for even more tightness QUICKTURN piston valves — easy operation by ergonomically shaped handles — fast operation with just a few turns from "open" to "closed" — Direction of rotation indication on the handle — The label on the handle allows the clear line marking — non-rising top — Dead space top — Functional parts of the piston valve maintenance-free and permanently lubricated — Deposition-resistant sealing piston by special profile All materials meet the requirements of the Federal Environmental Agency and are approved for drinking water.

Tapping of water is also possible during frost periods because the hydrant is completely emptied when in „closed“ Position. Simple emptying per Drainage. Wear-free operation due to the use of ceramic disks. Water jet and flow rate are alterable by use of different tap aerators. Non-return valve in the water inlet. Free choice of location (a wall etc. is not necessary). Hydrants are also available with lockable handle. height: 1400mm outlet: 150mm Art.-No.: 376797 height: 1400mm outlet: 250mm Art.-No.: 376803 height: 1400mm outlet: 300mm Art.-No.: 376810 height: 1600mm outlet: 150mm Art.-No.: 376827 height: 1600mm outlet: 250mm Artikelnummer: 376834 height: 1600mm outlet: 300mm Artikelnummer: 376841 height: 2000mm outlet: 250mm Artikelnummer: 376858 height: 2000mm outlet: 300mm Artikelnummer: 376865

Valve tapping bridge with service shut-off and for tapping 1 "- 2". Combination rubber insert chambered with several micro-sealing lips. Seal material according to KTW / W 270. Seal the bore with the auxiliary shut-off via the side outlet and seal it after tapping until the valve bonnet is reassembled. For each dimension, a top with matching clamp. scope of application • for plastic pipe (PE or PVC) DN 50 - 200 • for sluice-free, upper tapping under pressure by means of Rehbein auxiliary valve • for water up to PN 16

Flat slide with operating shut-off for water up to PN 16 (optional for gas up to PN 5) and for top tapping 1 "- 1½" under operating pressure. Thread outlet 1 "- 1½" parallel to the supply line. Connection piece with extremely low height. Outlet by means of elbow union. Front and main shut-off with externally driven, chrome-plated switching ball. Nominal diameter range DN 80 - 500 with only one connection piece with patented Vario seal. Seal material is from DVGW to KTW / W 270. Scope of application • for cast iron, steel and AZ pipes DN 80 - 500 • For sluice-free tapping under pressure without auxiliary valve • for water up to PN 16 • optional for gas up to PN 5