Transmitters - Import export

The weight transmitter PR 5230 processes weight values reliably and highly accurately from silo and vessel scales with analogue and digital load cells. The field housing enables direct and safe installation regardless of the ambient conditions. High precision, reliable and fast processing of weight values Convenient and efficient calibration of the scale in under one minute Global remote servicing with the Remote Service functionality Integrated display for status monitoring Dosing function EasyFill® reduces programming time

With its rugged housing and a stainless steel sensor element, the transducer is particularly robust and ideally suited to the harshest environments. This also means that the sensor can be installed anywhere with no effect on the measurement signal. The built-in instrumentation amplifier converts the sensor signals into noise-immune voltage signals or current signals that can be transmitted over relatively long distances. For high viscose materials, a front-level membrane M12 x 1 is available, and with this disruptive dead volumes can be expelled. The sensor has a small protected hole on the rear to allow measurement of atmospheric pressure (measurement type relative). For the absolute measurement option, the applied pressure is measured with respect to an enclosed vacuum. As an electrical connection, a DIN 43650A valve connector or an M12 x 1, 4-pin connection is available.

Freely scalable Adjustable Pt 1000 resistance sensor Assembling to application needs

With Pt100 or Pt1000 sensor NiCr-Ni sensor also available Scalable versions available With practical angle plug

Several probe lengths available Max. measuring range -200 to +500 C With Pt1000 sensor, Compact design, high precision

The pressure transmitter illustrated here measures differences in pressure between the two connections of the measuring element. Pressure differences can be measured with respect to a reference pressure, such as atmosphere, or to the command variable of a regulation system. Equally, however, it is possible to measure pressure differences within systems that have a high static pressure. One practical example of this would be measuring a flow rate by determining the pressure drop occurring across a metering diaphragm. The differential pressure transmitter measures in both directions and can therefore, for instance, be used on double-acting hydraulic cylinders. Its construction permits it to be used with liquid or gaseous media. Venting holes simplify installation. The robust design and the use of stainless steel make it possible to use the pressure transmitter under tough operating conditions.

The sensor model 8228 with its measuring accuracy of 0.05% F.S. (for the measuring ranges ≤ 1 bar, the measuring accuracy is 0.1% F.S.) ideally suited as a reference sensor. The compact dimensions, the robust housing and the industrial-grade output signal result in a very wide range of applications. All components in contact with media are made of stainless steel. An integrated measuring amplifier converts the measuring signals directly into interference-free voltage signals or current signals that can be transmitted over long distances. With the „gage“ measurement type, the pressure measurement is carried out against the ambient pressure, the sensor has a bore that is protected against ambient influences to compensate for the ambient pressure. With the „Absolute“ measurement type, the applied pressure is measured against an enclosed vacuum; this measurement type is available from the measuring range 0 ... 250 mbar. The electrical connection is made via an M12 x 1 connector.

The weight transmitter CSD-892 processes weight values from silo and vessel scales quickly and reliably with analogue load cells. Space-saving installation on DIN top hat rails. Configurable display for greater ease of use Time-saving configuration Connectivity for an easy data transfer Basic dosing possible without additional programming effort

Slipring transmitter are required for all rotating systems. We are able to construct and adapt them according to your requirements and of course combined with our rotary unions. So control-, working-, signal- and measuring currents are transfered from the static to the rotating unit. Our range of services: temperature range: up to 200°C, furthermore with internal cooling maximum diameter: 1600 mm current rating: up to 20.000 ampere signal transmission possible options: EX-proof, water- and gasproof, chemistry- and food resistant, special solutions

As the first weight transmitter for analogue strain gauge load cells, the Link E has a high-contrast touch display that makes it easy to read and easy to find all settings and information. Configuration takes place via your favourite web browser – no additional software required. ‘Smart Calibration’ enables adjustment entirely without the need for weights. This keeps installation and access times to a minimum. The Link E gives you the option to choose from nine widely-used interfaces for any application, including ModBus-TCP, Profibus, ProfiNet, DeviceNet or Ethernet/IP. The Link E is the result of the continued development of the successful PR 5211.

The ‘German Quality’ weight transmitter PR 5220 processes weight values from silo and vessel scales quickly and reliably with analogue and digital load cells. High precision, reliable and fast processing of weight values Convenient and efficient calibration of the scale in under a minute Global remote servicing with the Remote Service functionality Dosing function EasyFill® reduces programming time Space-saving installation on DIN top hat rails

The industrial pressure transmitter DMP 334 has been especially designed for use in hydraulic systems up to 2200 bar. The base element of DMP 334 is a thinfilm sensor, that is welded with the pressure port and meets high demands of foolproofness and reliability. All of characteristics and the excellent mesurement data of DMP 334 as well as distinguished offset stability offer a pressure transmiter with easy handling, reliability and robustness for hydraulic user. The DMP 334 is deliverable with pressure ports of extrem pressure technics. Features: — nominal pressure: 0 ... 600 bar up to 0 ... 2.200 bar — accuracy: 0.35 % FSO — pressure sensor welded — extremly robust and excellent longterm stability Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — pressure port M20 x 1.5 oder 9/16 UNF — adjustability of span and offset — different kinds of electrical connections

The pressure transmitter DPS 300 was developed for the differential pressure measuring for dry, non aggressive gases and compressed air and can be used for several HVAC applications. The DPS 300 is a multi range transmitter with up to three adjustable ranges. The device is equipped with a two-line LC display optionally and can simply parameterised. Values, status of the contact and the unit are shown on the display. Features: — differential pressure 0 ... 1.6 mbar up to 0 ... 1.000 mbar — accuracy: 0.5 % FSO BFSL — current and voltage output signals in 2- and 3-wire systems — adjustable ranges — adjustable damping Optional Features: — LC-display, two-line — automatic zero adjustment — contacts (only in combination with display) — square root extraction (only in combination with display)

The pressure transmitter DMK 457 with ceramic sensor has been designed for typical applications in shipbuilding and offshore constructions as alternative to our pressure transmitter DMP 457 with piezoresistive stainless steel sensor. In combination with the copper-nickel-alloy the DMK 457 is suitable for seawater, e.g. level measurement in ballast tanks, etc. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.5 % FSO — shipping approvals GL (Germanischer Lloyd), DNV (Det Norske Veritas), CCS (China Classification Society), ABS-certificate (American Bureau of Shipping), LR-certificate (Lloyd´s Register) — pressure port CuNiFe (sea water resistant) — oxygen application Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts

Features: — nominal pressure: 0 ... 1 bar up to 0 ... 400 bar — accuracy: 0.5 % FSO Optional Features: — oil and grease free version

Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 6 bar — accuracy: 0.5 % FSO — piezoresistive stainless steel sensor

The pressure transmitter DMK 331P is suitable for measuring the pressure of viscous and pasty media, where a totally flush pressure port is required. As on all industrial pressure transmitters made by BD\SENSORS, you may choose between various electrical and mechanical connections also on DMK 331P. Features: — nominal pressure: 0 ... 60 bar up to 0 ... 400 bar — accuracy: 0.5 % FSO — suited for viscous and pasty media Optional Features: — IS-version Ex ia = intrinsically safe for gases and dusts — SIL 2 according to IEC 61508 / IEC 61511 — food compatible oil filling with FDA approval — cooling element for media temperatures up to 300 °C — customer specific versions

Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 6 bar — accuracy: 0.5 % FSO — stainless steel sensor without media isolation

Features: — ceramic sensor — nominal pressure: 0 ... 1.6 bar up to 0 ... 250 bar — accuracy: 1 % FSO

The precise pressure transmitter x\act ci measures the pressure of gases, steam and fluids. The special-developed capacitive ceramic sensor for this transmitter, which can optionally be delivered in pure ceramic, has a high overpressure capability and excellent media stability. Several process connections e.g. inch thread or hygienic versions like Varivent, dairy pipe or Clamp are available. The robust stainless steel globe housing has a high ingress protection IP 67 and all characteristics for a residue-free and antibacterial cleaning. Features: — nominal pressure: 0 .. 160 mbar up to 0 .. 20 bar — accuracy: 0.1 % FSO — turn-down 1:5 — hygienic version — flush mounted, capacitive ceramic sensor — several process connections (inch thread, Clamp, ...) — with integrated display and operating module — diaphragm Al2O3 (99.9 %) Optional: — IS-Version Ex ia = intrinsically safe for gases and dusts — HART®-communication

Features: — differential pressure 0 ... 1 bar bis 0 ... 70 bar — display mode selectable: P+, P-, ∆P — display and pressure ports rotatable — 2 piezoresistive stainless steel sensors

The DMD 341 is a differential pressure transmitter for non-aggressive gases and compressed air. Because of its compact and robust aluminium housing it is suited for machine and plant engineering. Basic element is a piezoresistive stainless steel silicon sensor, which features high accuracy and excellent long term stability. In combination with our display and switching unit ASM 430 the user has a 4-digit LED-display for representing the differential pressure as well as up to 2 freely configurable contacts. Features: — differential pressure 0 ... 6 mbar up to 0 ... 1000 mbar — accuracy: 0.35% / 1% / 2% FSO — piezoresistive silicon sensor — compact and robust aluminium housing — suited for non-aggressive gases and compressed air — current and voltage output signals in 2- and 3-wire systems Optional Features: — display and switching module with up to 2 contacts — customer specific versions

The pressure transmitter DMK 387 has been specially designed for applications in plant and machine engineering as well as laboratory techniques and is suitable for measuring small system pressure and filling heights. By using our own-developed capacitive sensor, available in AI2O3 99.9%, the DMK 387 offers a high overpressure resistance and a high temperature and media resistance. The pressure transmitter is available in an intrinsically safe version for usage in explosive environments. Product characteristics: — Nominal pressure from 0 ... 100 mbar up to 0 ... 60 bar — Output signal: 2-wire: 4 ... 20 mA / 3-wire and others on request — diaphragm ceramics 99.9 % Al2O3 — accuracy: 0.35 % (opt. 0.25 %) FSO Optional features — IS-version Ex ia = intrinsically safe for gases and dust — different kinds of inch threads — pressure port in PVDF or PP-HT for aggressive media

The process pressure transmitter XMP i has been especially designed for the process industry and measures vacuum, gauge and absolute pressure ranges of gases, steam, fluids and dust up to 600 bar. Different process connections such as threads and flanges with an internal or flush welded diaphragm are available and can be combined with a cooling element for media temperatures up to 300°C. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.1 % FSO — turn-down 1:10 — two chamber aluminium die cast case or stainless field housing — internal or flush welded diaphragm — HART®-communication — explosion protection: intrinsic safety (ia) Optional Features: — explosion protection flameproof equipment (d) — SIL2 -version according to IEC 61508 / IEC 61511 — integrated display and operating module — special materials as Hastelloy® and Tantalum

The precise pressure transmitter x\act i has been especially designed for food industry, pharmacy and biotechnology and measures vacuum, gauge and absolute pressure of gases, steams and fluids up to 40 bar. Several process connections e.g. thread or hygienic versions like Varivent, dairy pipe and Clamp with a flush welded diaphragm are available, which can be combined with a cooling element for media temperatures up to 300 °C. The robust stainless steel globe housing has a high ingress protection IP 67 and all characteristics for a residue-free and antibacterial cleaning. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 40 bar — accuracy: 0.1 % FSO — turn-down 1:10 — hygienic version — flush welded diaphragm — integrated display and operating module Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — HART®-communication — Cooling element for media temperatures up to 200 °C

The precise pressure transmitter x\act ci measures the pressure of gases, steam and fluids. The special-developed capacitive ceramic sensor for this transmitter, which can optionally be delivered in pure ceramic, has a high overpressure capability and excellent media stability. Several process connections e.g. inch thread or hygienic versions like Varivent, dairy pipe or Clamp are available. The robust stainless steel globe housing has a high ingress protection IP 67 and all characteristics for a residue-free and antibacterial cleaning. Features: — nominal pressure: 0 .. 160 mbar up to 0 .. 20 bar — accuracy: 0.1 % FSO — turn-down 1:5 — hygienic version — flush mounted, capacitive ceramic sensor — several process connections (inch thread, Clamp, ...) — with integrated display and operating module — diaphragm Al2O3 (99.9 %) Optional: — IS-Version Ex ia = intrinsically safe for gases and dusts — HART®-communication

The precision pressure transmitter DMP 331Pi demonstrates the further development of well-tried industrial pressure transmitter DMP 331P. The signal from the specially designed piezoresistive stainless steel sensor is processed by the newly developed digital electronic system, performing thus an active compensation of sensor-specific deviations such as hysteresis, thermal errors and non-linearity. The temperature field of application of -40 ... 125 °C can be extended by the integration of a cooling element up to 300 °C. Features: — nominal pressure: 0 ... 400 mbar to 0 ... 40 bar — accuracy: 0.1 % FSO — excellent temperature response 0.04 % FSO / 10K (≤ 0.04 % FSO / 10K) — hygenic version — vacuum resistant — processing of the sensor signal using digital electronics Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts

The industrial pressure transmitter DMP 335 is based on a stainless steel welded pressure sensor without fluid. This characteristic has a special advantage with applications where silicon oil or elastomeric seals cannot be used. Features: — nominal pressure: 0 ... 16 bar up to 0 ... 600 bar — accuracy: 0.5 % FSO — suitable for oxygen applications — insensitive to pressure peaks — high overpressure capability Optional Features: — IS-version Ex ia = intrinsically safe for gases and dusts — customer specific versions

The pressure transmitter DMP 343 has been especially designed for the measurement of very low gauge pressure and for vacuum applications. Permissible media are non-aggressive, dry gases and non-aggressive, low viscos oils. The DMP 343 features excellent thermal behaviour and outstanding long term stability. A variety of standard output signals as well as mechanical and electrical connections make the DMP 343 covering a wide field of applications. Features: — nominal pressure: 0 ... 10 mbar up to 0 ... 1000 mbar — accuracy: 0.35 % — small thermal effect — excellent long term stability — excellent linearity Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — different electrical and mechanical connections — customer specific versions