Transmitters - Import export

Freely scalable Adjustable Pt 1000 resistance sensor Assembling to application needs

With Pt100 or Pt1000 sensor NiCr-Ni sensor also available Scalable versions available With practical angle plug

Several probe lengths available Max. measuring range -200 to +500 C With Pt1000 sensor, Compact design, high precision

Slipring transmitter are required for all rotating systems. We are able to construct and adapt them according to your requirements and of course combined with our rotary unions. So control-, working-, signal- and measuring currents are transfered from the static to the rotating unit. Our range of services: temperature range: up to 200°C, furthermore with internal cooling maximum diameter: 1600 mm current rating: up to 20.000 ampere signal transmission possible options: EX-proof, water- and gasproof, chemistry- and food resistant, special solutions

THA 200 THA 400 THA 1000 THA 1250 Compatible with any thermocouple probe type K, J or T (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THK 200 THK 400 THK 1250 Compatible with any thermocouple probe type K, J, T or R/S (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THN 200 THN 400 THN 1250 Compatible with any thermocouple probe type K fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

USB temperature converter - including free readout software - efficient and flexible measurement without additional measuring system - mobile and directly on site - for all common thermocouples.USB stick with software for direct reading and further processing on the PC Plug connection - flexibly connect the USB stick to the temperature sensor Processing of the measured values, transfer to the software Different temperature sensors and thermocouples possible Various cable types , lengths and types of connections can be selected

Precision: (at nominal temperature = 25 °C) NiCr-Ni: ±1% ±1 digit (from -20 to +550 °C or 920 to 1,150 °C) NiCr-Ni: ±1.5% ±1 digit (from 550 to 920 °C) Pt100, Pt1000: ±0.5 °C ±1 digit or ±1 °C ±1 digit Offset adjustment: (only with Pt100 and Pt1000) The sensor”s zero offset (e.g., caused by a long cable) can be adjusted with the aid of the offset trimmer on the rear of the device.

Compatible with any thermocouple probe type K fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

Thanks to our many years of experience in the controls sector, you can benefit from a comprehensive range of products that also includes the right solution for even the most demanding requirements. Control your cranes, machinery and installations with our wire-connected control pendants – and utilise the wide choice of configuration options. Or profit from the maximum flexibility, safety and reliability offered by our radio controls. All of our controls give you ergonomic design, convenient operation and many opportunities to tailor the solution to meet the needs of your application.

The cable transmitter µCAN.1.sg-TRS is the universal data acquisition module for standard analogue full bridge strain gauge signals. The bridge is powered via the transmitter. The TRS family is ideally suited for being integrated directly in the measuring lines at a short distance from the sensor.

The cable transmitter module µCAN.1.ai-TRS is designed to acquire one analogue measurement signal. The TRS module is integrated directly in the measurement line where the analogue signals are digitized and transmitted to the processing unit via CAN interface.

Radar (FMCW) level transmitter for liquids with hygienic requirements The OPTIWAVE 3500 is a 2-wire 80 GHz radar (FMCW) level transmitter for liquids in hygienic applications. It is designed for continuous, non-contact level measurement in the food and beverage as well as pharmaceutical industry. The device features a flush-mounted PEEK Lens antenna with a small beam angle and dead zone for precise measurement even in small and narrow tanks with agitators. It is equally suited for use on larger tanks up to measuring distances of 50 m / 164 ft. As the radar withstands process temperatures up to +150°C \ +302°F and pressures up to 25 barg / 362 psig, it can be used in CIP/SIP cleaning procedures. The OPTIWAVE 3500 offers a large choice of hygienic process connections. It comes with extensive device diagnostics as well as HART®7 communication.

The OPTIBAR PC 5060 is a pressure transmitter for process pressure and hydrostatic level measurement in all kinds of process applications. It is designed for absolute and gauge pressure measurement in open tanks and – as dual version for electronic differential pressure measurement – also in closed vessels. The pressure device features a ceramic capacitive measuring cell that guarantees maximum overload and vacuum resistance for high plant availability. The measuring cell can be built into the process absolutely flush and the radially recessed position of the gasket provides additional protection in abrasive media. It is resistant to sudden temperature shocks and can handle operating temperatures of up to +150°C/ +302°F. The OPTIBAR PC 5060 comes with robust plastic and aluminium housing or hygienic stainless steel versions (incl. ingress protection IP69k). The pressure transmitter comes with various diagnostics and digital communication options.

Radar (FMCW) level transmitter for agitated and corrosive liquids The OPTIWAVE 7400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in harsh environments like tanks with agitators containing corrosive media. It is particularly designed for continuous, non-contact level measurement under extreme conditions prevalent in the chemical, petrochemical or oil and gas industry. The device features Metallic Horn antennas as well as PTFE and PEEK Drop antennas for measuring distances up to 100 m / 328 ft. The Drop antennas are perfectly suited for aggressive liquids in tanks. In applications with toxic and dangerous products, this radar device can be equipped with a Metaglas® second sealing barrier.

Radar (FMCW) level transmitter for powders and dusty atmospheres The OPTIWAVE 6500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding applications with powders in very dusty atmospheres. With its small beam angle, this radar is particularly suited for continuous, non-contact level measurement in high and narrow silos, hoppers or buffer storage containers up to 100 m / 328 ft. Due to the high signal dynamics of the FMCW radar, the level transmitter is ideal for low-reflective media, dust, uneven surfaces or tanks with obstacles. As it features a flush-mounted PEEK Lens antenna, there is no intrusion of the antenna into the tank.

The OPTIFLEX 1100 is a guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for basic storage applications in non-hazardous areas. The level transmitter is a higher performing replacement for traditional level transmitters such as RF capacitance or conductive level transmitters. It offers 3 types of probes which can all be shorted on site.

For liquids in basic process applications The OPTIWAVE 5400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in basic process applications. It is particularly designed for continuous, non-contact level measurement in the chemical, petrochemical as well as oil and gas industry. It can be equipped with a PP Drop antenna for condensing atmospheres and corrosive media but features also Metallic Horn antennas. Due to its high dynamic range, the 24 GHz radar can measure distances up to 100 m / 328 ft.

Radar (FMCW) level transmitter for solids from granulates to rocks The OPTIWAVE 6400 is a 2-wire 24 GHz radar (FMCW) level transmitter for basic applications with solids. This radar is designed for continuous, non-contact level measurement of stones, plastic granulates, coffee beans and other products in solids processing of various industries. The level transmitter features a Metallic Horn antenna as well as PP and PTFE Drop antennas. The Drop antenna design minimizes scaling and is unaffected by the angle of repose. Hence no need for expensive antenna aiming kits or purging systems.

Digital pH sensor SMARTPAT analytical sensors from KROHNE are the first and only sensor line in the market with integrated transmitter technology. The complete circuitry is miniaturised and fits into the sensor head. This technical achievement cuts the price in half compared to all measurement systems without integrated transmitter technology. KROHNE is the only company who offers a real open standard without additional external transmitter and with a direct connection via standardised fieldbus from the sensor to the process control system. The SMARTPAT sensor stores all data and sends these as bidirectional digital signals with 4...20 mA / HART® 7 protocol to the control and asset management systems, handhelds, PC and other peripherals.

Analogue 3-wire temperature Transmitter The OPTITEMP TT 11 is an analogue, multirange 3-wire temperature transmitter which works together with single resistance thermometers of the type Pt100 and Pt1000. A special feature of the device is its 0...10 VDC output that predestines it for the HVAC systems in building services applications. The transmitter has a high reliability and a good industrial performance. The OPTITEMP TT 11 series consists of 2 different versions in terms of the mounting. The TT 11 R is the rail-mount version for DIN rails whereas the TT 11 C is primarily intended to be mounted in a "B connection head" or larger according to DIN EN 50446. As an alternative you can also mount the in-head version on a DIN rail according to EN 60715 with the help of an optionally available rail mounting kit.

Analogue 2-wire temperature Transmitter The OPTITEMP TT 10 is an analogue, multirange 2-wire temperature transmitter which works together with RTDs of the type Pt100. The main field of application is an industrial environment, therefore the device has a high reliability and an excellent industrial performance. The OPTITEMP TT 10 series consists of 2 different versions in terms of the mounting. The TT 10 R is the rail-mount version for DIN rails whereas the TT 10 C is primarily intended to be mounted in a "B connection head" or larger according to DIN EN 50446. As an alternative you can also mount the in-head version on a DIN rail according to EN 60715 with the help of an optionally available rail mounting kit.

Guided Radar (TDR) Level Transmitter for the nuclear industry This 2-wire loop-powered HART® TDR level transmitter measures distance, level and volume of liquids. Ist different versions, high resistance to radiation and seismic qualification make it the ideal TDR device for safety-related and non-safety-related nuclear applications. — Agrees with nuclear standards (e.g. ASME Section III, RCC-M) — Qualified according to IEEE Std 323, IEEE Std 344 and RCC-E — Remote converter can be installed up to 400 m / 1312 ft away from probe

Air speed, Temperature 0.05 ...20m/s 4 20mA output Four configurable ranges

Double analog output extended range -40 +150 C 0 100%RH RS485 output MODBUS- RTU

Air speed, Temperature 0.05 ...20m/s 4 20mA output Four configurable ranges