Thin tube - Import export

BORSIG manufactures reformed gas waste heat boilers for more than 50 years. We supply reformed gas waste heat boilers for gas inlet temperatures of up to 1,200°C and steam pressures of up to 160 bar (16,000 kPa) for petrochemical industry (ammonia plants, methanol plants, hydrogen plants, ethylene plants, styrene plants, MTBE plants, oxo-alcohol plants, direct reduction iron plants, coas gasification plants, gas to liquid plants, and others. Every reformed gas waste heat boiler is designed and manufactured exactly in accordance with the customer´s individual requirements. BORSIG offers two different designs: 1. Reformed gas waste heat boilers with BORSIG´s thin stiffened tube sheet design 2. Reformed gas waste heat boilers with thin flexible tube sheet design.

The roller brush type 964 is made of single section brushes mounted together on a core up to the required face width. This roller brush type can be mounted on cores made from stainless steel, plastic coated steel, or mild steel. Kullen-Koti recommends especially this brush type for heavy-duty operations with a high dense brush surface, e. g. by using our single section brushes with twisted steel knots (Type Z-SH). But we can manufacure the single section in almost all other fill material types. For mounting the single section brushes on the core or by the operator himself on the existing primary shaft, we use our fixing ring (FRB / scew nut (MB) system. The single section brushes are available in 10 particular series-diameter (KD.) The single section brushes can be supplied as roller brushes type 964 with the following core systems: - system WK 1/WK 2 with journals. - tubular core with reduction bushes (WK 3). - "Throw-Away" system with thin-walked tube with arbor hole fitting on...

Our highly flexible vacuum hoses are produced from longitudinal seam-welded, thin-walled stainless steel tubes, which are hydraulically formed in special-purpose machines. Our vacuum hoses are specifically cleaned after metal forming, during processing protected from uncleanness and prior to dispatch shrink-wrapped. Furthermore, all vacuum hoses will be leak tested prior to dispatch, by means of helium leak testing with up to 10E-8 mbar*l/s.

BIEGLO offers polyimide tubes with inner diameters starting from 2mm and going down to 100 micron. Our polyimide tubing are mainly used in the medical industry for catheters or neurovascular applications. Dexnyl polyimde tubings are extruded from thermoplastic polyimides and offer excellent pushability and tractability as well as ultra-smooth surface and transparency. USP class VI (USP 6) compliance is of course a given.

The Dexnyl PEEK tubes can be an intelligent solution for round and hollow pieces. They are mostly extruded or compression molded. But BIEGLO GmbH offers also injection molded PEEK tubes and spin casting PEEK tubes in long and short length and special thin wall tubes. Parts made-up of our PEEK offer excellent hydrolysis and electrical insulation. PEEK is the ideal replacement for metal and other plastics due to its high temperature resistance of up to 240°C , excellent chemical and wear resistance. Our range of PEEK tubes starts with 25mm up to 1.480mm (external diameter); 20mm up 1.300mm (internal diameter). Our PEEK tubes are also available made of compounded PEEK.

The 2M connector was developed for thin pipes such as capillary tubes with an outside diameter from 0.7 to 6.35 mm. It consists of a sealing cone which is pushed into the matching inner cone of the connector and acts as a bushing for the pipe while performing a sealing function. An additional O-ring, which is protected from damage by a pressure disc, holds the pipe in place and prevents it from being pulled out accidentally.

Fixtures Thin wall , zero halogen shrinkable tubing Material Halogen free tube shrink Colors Standard colours: black, yellow, white. Non-standard colours are available on request. Temperature range Continuous operating temperature range of –30ºC to +105ºC (–22oF to +221oF). Resistance According to BS 6853:1999, According toCEN/TS 45545-2 According toUNI CEI 11170-3.

Conventional thermometers measure the temperature by means of length or volume change of a material, and are only suitable as display instrument. Temperature sensors from Lenord+Bauer use resistance thermometers that feature an almost temperaturelinear resistance curve, and output the resulting measurement data as electrical signal. They are suitable for a measurement range from 40 °C to +250 °C. A thin stainless steel tube protects the electronics from dirt, humidity and corrosion, allowing the sensors to meet the requirements of protection class IP 68. The sensors are in compliance with fire protection standards EN 45545 and are typetested according to EN 50155. • Platinum resistance thermometer Pt100 / Pt1000 • Measuring tube lengths from 30 mm to 140 mm • Connection with 2, 3 or 4wire technology • Fire behaviour according to DIN 5510 and NF F16101 • Custom configuration

Deep-drawn tubes from stainless steels (with a closed side or open) Deep-drawn tubes from non-ferrous metals as bronze, brass,... Seamless sleeves made with stamping processes Ultra thin-walled tubing in Beryllium copper or other special alloys Annealing services in vacuum furnaces Washing technologies for soap and oil The precision tubing is needed at Mera Bellows to manufacture seamless metal bellows.

Stainless steel bellows, formed from seam-welded thin wall tubing Stainless steel bellows, formed from deep-drawn seamless tubing Bronze and Brass bellows for measuring and controlling applications Hydroformed bellows from exotic alloys as Beryllium copper or Monel400 Customized designs and end forms, also off-the-shelf standard solutions Special coatings on demand

Due to change in weather (wind, sun, snow...), pipe systems of solar thermal systems are subject to thermal expansion, to vibration, to make in short; various movements that have to be compensated in order to keep the system stable. Mera Bellows manufactures stainless steel expansion joints, formed from thin-walled seam-welded tubes, that are widely used for this scope of application.

Our high-grade friction saw blades, MALTESERKREUZ BRAND, are used among other things for cutting profiles, thin-walled tubes, gratings etc.. It is characterised by its high abrasion resistance and a long life-time. Basic version in material 80 CrV 2 (material-no. 1.2235) chrom-vanadium-steel, plain hardened, hollow or surface ground, tensioned and straightened. Tooth geometry: Tooth Trennjäger; pointed toothing Standard Dimension: 400 x 3,0 mm 240 teeth 450 x 3,0 mm 240 teeth 520 x 3,0 mm 300 teeth 520 x 4,0 mm 300 teeth 550 x 4,0 mm 300 teeth 600 x 4,0 mm 300 teeth 700 x 5,0 mm 300 teeth 1000 x 8,0 mm 350 teeth

Stamping of especially thin-walled tubes with high demands on precision and a burr-free surface is one of our specialities. We are stamping with full and half automated stamping units and can produce any stamping geometry in one clamping withoud deforming the parts.

Stamping of especially thin-walled tubes with high demands on precision and a burr-free surface is one of our specialities. We are stamping with full and half automated stamping units and can produce any stamping geometry in one clamping withoud deforming the parts.