Well construction - Import export

The three-disc sanding machine for perfect fine sanding! Among other things, it is characterised by its extremely effective dust extraction performance. Another highlight is the near-edge and direction-free sanding. The TRIO is also versatile, extremely user-friendly and easy to maintain. Its mode of operation enables sanding results with highest quality. When it comes to achieving a premium quality of a wooden surface, the TRIO is the right choice! For example oiling and colouring a wooden floor create special challenges, which require a high surface quality. This task is mastered by the TRIO as well. Its ergonomic construction allows easy handling with minimal physical strain. Both, the abrasive and the dust bag, can be changed quickly and easily. Due to the integrated filter system, the dust extraction is very efficient, which enables almost dust-free sanding.

Almost no-one understands complex construction as well as MS-Graessner, due to the fact that the gear tooth and gear specialist‘s creations are based on more than 60 years of experience. Intelligent solutions for a wide range of sectors and applications make MS-Graessner a reliable industry partner in both gear tooth technology and gear construction.

Gas storage systems by Lipp have been successfully installed in more than 300 projects in Germany and worldwide. The gas storage capacity extends from 30 to 5,000 m³. The gas resistant PVC gas holder is protected by a galvanised steel cylinder. The self supporting roof is made of 1.4301 high grade stainless steel. The Lipp gas holder is offered as a complete system, including sensors and built in parts as well as steel construction, and can be easily integrated into an existing system. The main area of application of the Lipp gas holder is municipal waste water treatment plants and landfills which want to balance out fluctuations in gas production and at the same time need a buffer store for possible downtimes. A further gas holder may also be of interest for direct marketing of biogas, where feed in at certain times is necessary. The Lipp gas holder is especially attractive when considering the fact that electricity cannot be stored. But (bio) gas, which is used for power generation

SYSTEM SOLUTIONS FOR MUNICIPAL WASTE WATER TREATMENT Lipp has for many decades been an established partner of municipal waste water treatment plants, engineers and general contractors in the field of tank and system solutions for municipal waste water treatment. Due to their method of construction as well as flexibility in the choice of materials and ideal diameter – height ratios, Lipp tank and system solutions are especially suitable for the needs of small to large sewage treatment plants. They are ideally tailored to one another, but may also be embedded as individual island solutions into existing systems and are therefore equally popular with planners and end users alike. The stainless steels used and the double seaming guarantee maximum water tightness and durability with low maintenance for a wide variety of waste waters, slurries, process liquids and gases. The versatility in terms of the system solutions offered for municipal waste water treatment plants

Universally applicable wire-actuated encoder with measuring lengths of max. 12000 mm, robust construction as well as precise and safe wire guidance, prepared for attaching the most diverse types of rotary encoders with a 58 mm standard flange. Robust design, Easy mounting, Measurement lengths up to max. 12000 mm, Incremental or absolute encoder, Also available as a safety version in combination with WV58MR rotary encoder, High flexibility thanks to free choice of rotary encoders with 58 mm standard flange, Various wire types, With PURE.MOBILE technology

Universally applicable wire-actuated encoder with measuring lengths of max. 6000 mm, robust construction as well as precise and safe wire guidance, geared up for attaching the most diverse types of rotary encoders with a 58 mm standard flange. Robust design. Easy mounting. Measurement lengths up to max. 6000 mm. Incremental or absolute encoder. Housing made of aluminum and plastic. High flexibility thanks to free choice of rotary encoders with 58 mm standard flange. Various wire types.

The Comparator Gauges Compika offer a high degree of security and precision. They are based on a solid and well thought-out construction taking into account the latest technology. They are manufactured by the most up-to-date methods. The following quality features characterize our manufacturing programme of Comparator Gauges Compika: Their design conforms to the requirements of DIN 879-1. This applies not only to the dimensions but also to permitted spans of error, hysteresis and measuring pressure. Effective shockproof system Pinions and shafts of the movement are jewelled After removal of the safety cap the adjustment screw on top of the case allows simple and safe zero setting of the instrument over the total measuring range. A safety cap prevents unintentional turning of the fine adjustment facility. Stem and spindle are made of hardened stainless steel. The measuring spindles are very sensitive on account of their accurate guides. Additional overtravel assists with the...

Installation In addition to the high integration level of outfitting elements, the short on-site construction duration represents a decisive advantage of our modular units. We leave nothing to chance here. This begins with a building design that facilitates installation and does not end with the keeping of delivery deadlines and scheduling of suitable equipment and personnel. An on-site installation operation can take anything from a few hours for a single modular unit to several days for large combination buildings in this respect. Our installation technicians are all experienced and skilled personnel from a structural and civil engineering as well as steel construction background – professionals in every aspect of modular unit installation. They are familiar with every detail of our products and materials and have the expertise involved on the processes employed at their fingertips. Major importance is placed in this respect on occupational safety. We place immense...

The oil-free piston vacuum pumps of the range KV are realized where utmost operating safety is required, as for example in 24/7-application in industry enterprises, for retention of hydraulic oils on service at construction machinery as well as for medical machines. The oil-free piston-vacuum pumps offer as a 2-phase pump a vacuum of up to 30 mbar. The characteristic of the oil-free piston-vacuum pumps are the integrated, overdimensioned bearings. Owing to this, the best possible lifetime and reliability of the vacuum pumps is achieved. The suction capacity of oil-free piston-vacuum pumps of the range KV remains almost unchanged even after many thousand operating hours because of the exactly aligned components. Advantages Extremely reliable Long lifetime Constant flow volume Piston principle

The P 26 differential pressure transmitter is designed for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres as well as for special uses in machine and plant construction. As well as measuring the differential pressure, the instrument also records positive and negative overpressures as well as flow rates or volumetric flows. The measuring range is scalable in the range from 10 .. 100 %. Two optional contact points allow the user to connect visual or audible alarms that are triggered any time values rise above or fall below specified limits. The transmitter can be configured easily via an USB interface (optional) with software. This can also be performed using a keyboard and display (optional). The measured values can be displayed in all standard units. A selectable time constant allows the transmitter to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal.

The P 34 differential pressure transmitter is designed for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres as well as for special uses in machine and plant construction. As well as measuring the differential pressure, the instrument also records positive and negative overpressures as well as flow rates or volumetric flows. The measuring range is scalable in the range from 10 .. 100 %. Two optional contact points allow the user to connect visual or audible alarms that are triggered any time values rise above or fall below specified limits. The transmitter can be configured easily via an USB interface (optional) with software. A selectable time constant allows the transmitter to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal. The P 34 can be mounted on top-hat rails.

The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. More detailed key data here: Dry self priming - dry-running safe - sucks without auxiliary fluids Sealing of the shaft using highly wear resisting mechanical seal Blockage-free due to open impellers - non-sensitive for the use on construction sites, in the municipal and industrial sectors Mobile or on carriages with three-phased motors of 3.0 / 5.5 / 11.0 kW With diesel engines 3.0 / 6.5 / 12.5 / 22.0 kW output up to 234 m³/h For PTO-drives 15 - 40 kW Output up to 360 m³/h The Eisele construction and sewage pumps BS-BSD-BSG are self-priming rotary pumps. Areas of application are, next to industrial and handicraft businesses, also in ship construction and for emergency services. They are suitable for draining ponds, shafts and construction pits as well as for ground water lowerings, or for pumping waste water.

EPS MEANS OPTING FOR MAXIMUM FREEDOM. Technical molded parts made of expanded polystyrene (EPS) are the material of choice when it comes to good moldability, light weight, and outstanding insulation. EPS is ideal for the lost foam casting process. This involves embedding an EPS foam model of the desired component within a casting chamber in molding sand and dissolving it by pouring in molten metal. Compared to other processes, this affords greater design freedom when creating the cast parts, because neither built-in parts nor connections are necessary. As such, even complex cast components can be produced easily and particularly inexpensively. EPS also serves the construction industry well: Due to their very low thermal conductivity, technical molded parts are used as insulation elements and panels for underfloor heating systems. They can also be used as formwork elements. Whether for individual geometries or technically demanding structures, EPS makes it possible.

BORRIES stamping machines can be used in a workshop for single, small batch and batch production. They are adaptable for almost every deformable material. Because of the big usable stroke workpieces with different heights can be marked without any adjusting. The easy handling, the well-engineered construction and the large range of marking stamps offer a lot of different application areas and make the BORRIES stamping machines to an indispensable tool.