Results for
LUTZ PUMPEN GMBH
Germany
The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
SYSTEM SOLUTIONS FOR GAS STORAGE With the Lipp gas holder Lipp offers a tried and tested system solution which is complete in itself, for unpressurised storage of biogas, sewage gas and landfill gas. This solution is chiefly used for municipal waste water treatment plants and landfills. Due to its design, as well as high functional and operational safety, it also ensures low maintenance costs over a very long service life. This is mainly because the sensitive gas holder is protected against UV radiation and other environmental influences by a steel container manufactured with the Lipp dual seam system. Furthermore, this construction method allows an exact leak test and highly accurate metrological monitoring of the gas fill level. Both aspects are essential for safe and efficient plant operation. With certification according to § 19 WHG for Lipp GmbH and DVGW approval of the gas storage tank, further conditions are met for use in municipal waste water treatment plants.
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
SYSTEM SOLUTIONS FOR MUNICIPAL WASTE WATER TREATMENT Lipp has for many decades been an established partner of municipal waste water treatment plants, engineers and general contractors in the field of tank and system solutions for municipal waste water treatment. Due to their method of construction as well as flexibility in the choice of materials and ideal diameter – height ratios, Lipp tank and system solutions are especially suitable for the needs of small to large sewage treatment plants. They are ideally tailored to one another, but may also be embedded as individual island solutions into existing systems and are therefore equally popular with planners and end users alike. The stainless steels used and the double seaming guarantee maximum water tightness and durability with low maintenance for a wide variety of waste waters, slurries, process liquids and gases. The versatility in terms of the system solutions offered for municipal waste water treatment plants
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
TANK AND SYSTEM SOLUTIONS FOR WASTE WATER TREATMENT PLANTS Individual, customised container and system solutions have been one of the core business areas of Lipp GmbH for decades. This is demonstrated by the long list of references for completed tanks and equipment that have been implemented in close cooperation with well known engineering firms and companies for industrial waste water treatment plants at home and abroad. From simple, open topped waste water tanks through process vessels with special requirements for stainless steel and sealing materials to fully equipped fermenter types, (SBR, CSTR etc.) for different applications, Lipp offers a wide range of system solutions. Each project is planned and manufactured individually according to specific customer requirements for material, diameter, process instructions etc., and installed and tested if necessary in close cooperation with the partners. The versatility of the Lipp system in combination with process
Request for a quoteBÜRKLE GMBH
Germany
Burette with Schellbach stripes type Schilling / Bürkle with original Bürkle dosing armature. A universal aid in the laboratory, electroplating industry, water treatment plants, for field analyses, etc. Precise dosing using the press button, exact fine titration with the micro-screw and precise discharge jet. Graduation according to Category B (Tolerances according to DIN EN ISO 385).
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
Gas storage systems by Lipp have been successfully installed in more than 300 projects in Germany and worldwide. The gas storage capacity extends from 30 to 5,000 m³. The gas resistant PVC gas holder is protected by a galvanised steel cylinder. The self supporting roof is made of 1.4301 high grade stainless steel. The Lipp gas holder is offered as a complete system, including sensors and built in parts as well as steel construction, and can be easily integrated into an existing system. The main area of application of the Lipp gas holder is municipal waste water treatment plants and landfills which want to balance out fluctuations in gas production and at the same time need a buffer store for possible downtimes. A further gas holder may also be of interest for direct marketing of biogas, where feed in at certain times is necessary. The Lipp gas holder is especially attractive when considering the fact that electricity cannot be stored. But (bio) gas, which is used for power generation
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
Lipp tank and system solutions for municipal waste water treatment have been realised in close cooperation with well known design companies and end customers since the 1980s. In addition to municipal waste water treatment plants in Germany, Austria, Switzerland, France and other European countries, the Lipp system has already been successfully installed in many Asiatic projects. Lipp waste water tanks are offered in variable sizes and with individually adapted features (material, covers, additional equipment). Our success lies in professional management and close cooperation with all stakeholders over the entire project period. Reliable tank solutions, timely installation and numerous reference plants both in Germany and worldwide make Lipp an important partner in municipal waste water treatment.
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
ATMOSPHERIC PRESSURE, MAINTENANCE FREE AND PROTECTED AGAINST EXTERNAL EFFECTS The pressureless gas storage system of Lipp is used for the storage of gas produced on landfill sites, waste water treatment plants and also as external storage on biogas plants. The system is determined by its robust and technical advanced construction where the gas balloon is protected by a galvanized steel tank. This protects the balloon against UV light and also other external factors. The system is mostly utilized at landfill sites or WWTP to buffer the gas before its further processing. The experience gained during the past decades has improved the complete system and the single components and makes it a perfect choice for end users and general contractors.
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
WASTE TO ENERGY INDUSTRY BIOGAS FROM ANAEROBIC WASTE WATER TREATMENT AND WASTE FERMENTATION PLANTS. Due to their technical characteristics and profitability, Lipp tank and system solutions are used in a variety of industrial biogas plants. Two areas of application can be distinguished, which in many cases also follow both objectives. APPROPRIATE PROCESS TECHNOLOGY, SUITABLE CONTAINER TECHNOLOGY AND THE RIGHT DIMENSIONSFirst, the anaerobic treatment of various industrial waste waters, such as in food production, biofuels or similar. The main objective here is the anaerobic pretreatment of highly contaminated but easily degradable waste water to reduce the COD load before it can go to the next stage of aerobic waste water treatment. The challenge is that in spite of the low DM content, a high degree of degradation is achieved by biomass retention or return and at the same time, biogas is produced. Due to the flexibility and variability of the Lipp system in terms of procedures
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Servo motors in hydropower plants normally operate water hydraulically. These servo motors perform the functions of opening, closing and control of shutoff and regulating devices and must be able to maintain the setting position at any prevailing pressure.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Kaplan turbines are typically used for river power plants on calm waters. The blade angle runner blades (Kaplan blades) is adjustable. The pressure of the water flow, which is controlled by the guide vanes of the upstream wicker gate, can then be efficiently converted into energy. The bidirectional MANOY® system seal WP, type 444, in the form of a continuous ring was developed to protect the hydraulic adjustment device and prevent hydraulic fluid leakage. Type 449 is particularly useful for maintenance work because rather than being continuous in circumference, the seal is open and has a guide blade.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. Advantages of clamp connection: - Less connecting pieces - Fast segment connection - Clamps can be “stored” at the segment - Stepless segment positioning with height offset
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. - Infinitely adjustable for diameters from 2 - 5 meters, and 5 meters to infinite - Only 0.28 - 0.55 ties/m² - Delivered ready to use to the construction site - Perfectly round and with exact dimensions - System solutions for haunch girders and uneven surfaces - Compatible with all PASCHAL systems
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Circular Formwork with adjustable radii for waste water treatment plants, reservoir construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. - For fair-faced concrete - perfect concrete finish (no bolt impressions) - Infinitely adjustable for diameters from 5 meters to infinity - Only 0.28 - 0.55 ties/m² - Delivered ready to use to the construction site - Integrated crane lifting clamps - Perfectly round and with exact dimensions - System solutions for haunch girders and uneven surfaces
Request for a quoteOSMO MEMBRANE SYSTEMS GMBH
Germany
Coating colour recycling at paper and cardboard industries During the production of coated paper, it has to be cleaned with water and so, waste water results with pigments of the coating color. Because of their properties, exisiting precipitation plants are working hard on these types of waste waters. Alternatively to precipitation plants, membrane filtration technologies can be used to recover these high-value coating pigments. For that, the water with coating color pigments is circulated through the membrane plant until the required concentration is reached. The permeate is free of particles the CSB value is reduced significantly. It can know be handled by the precipitation plant, which is relief by the removing of the pigments. The concentrate with coating color pigments will be recirculated into the production process. Advantages: Reduction of coating color and pigments consumption Reduction of solid amounts in the waste water, which means reduction of operation costs
Request for a quoteOSMO MEMBRANE SYSTEMS GMBH
Germany
Recovery of flexoprint dye Picture: printing dye (red); ultrafiltrate (orange); nanofiltration permeate (clear) Application: Conditioning and concentration of cardboard printing dyes (flexo print), e.g. paper bag manufacturing, corrugated board manufacturing. Conditioning of the rinse waters by ultrafiltration(UF): Recovery and recycling of dyes, separated by tonality Further conditioning of the permeate by nanofiltration(NF): Recovery of the rinse water Further conditioning of the UF-concentrate by evaporation / distillation as pre-stage for external disposal Advantages of the process: Recovery of dyes separated by tonality is possible and established Recirculation of the rinse water is possible and established Reduction of the waste water amount At existing waste water treatment plants (based on precipitation) amounts of sludge can be reduced enormously Compact and modular design Fully automized process - low personnel costs High degradation rate and efficiency (concerning CSB, Cu,
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
wivel jib crane 4551.015Swivel jib crane, galvanized, admissible load max. 175 kg, regulating capacity 275- 775 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HERMA GMBH
Germany
HERMA Wash-off adhesives are characterized by their reliable adhesive force, even in cool and humid environments, and can still be washed off residue-free in industrial cleaning processes. HERMA offers washable pressure-sensitive adhesives for a wide variety of applications and washing conditions. HERMA offers solutions for reusable boxes and containers as well as products that are optimally tailored to the recycling of plastic bottles and packaging. In the cleaning process, the HERMA labels are removed from reusable trays or reusable trays in food and plant logistics using water, high pressure and with the help of highly effective cleaning agents. Furthermore, HERMA Wash-off adhesives enable very pure recyclate to be produced when recycling PET bottles or PET, PE and PP packaging, without any annoying residues from paper or film labels or without adhesive residues.
Request for a quoteSCALES AND MEASURING INSTRUMENTS
Germany
Moisture analysing is an integral part of production and processing of many raw and finished products and has a crucial impact on the quality of the product. Moisture analysers are used particularly in the food industry, water resource management (sewage plants, etc.), plastics industry, agriculture and the energy industry (bio-energy plants, etc.). Determining moisture requires a great deal of experience. Depending on the type of sample and the task involved, various drying processes are used. Sample is evenly warmed from above, without risk of burning the sample surface Affordable purchase costs ensure rapid amortisation of the device Most common temperature ranges from 35 – 200 °C High measuring precision, up to 0.01 % Sufficient buffer capacity, weighing capacity up to 200 g Various drying programs (soft drying, standard drying, drying in levels, rapid drying (Boost)) The
Request for a quoteASSFALG GMBH
Germany
The circular trough vibratory finishing machines are ideal for small and large series for different workpieces. A noise protection cover reduces the noise and makes it possible to work in a workshop. The right and left-hand circulation as well as speed regulation from 1,200 to 1,500 rpm provide for various processing possibilities. The abrasive material and workpieces are rotated through the generated vibration. The desired processing process is created through the contact of grinding bodies on workpieces. The programmable timer rounds off the autonomous work process. We recommend a paper filter or a fully-automatic water treatment plant for simple and comfortable water treatment. The integrated separating equipment simplifies the separation of grinding bodies and workpieces.
Request for a quoteResults for
Water plants - Import exportNumber of results
21 ProductsCompany type