Transformator - Import export

Our mid range frequency converters are delivering up to 250 kW output at frequencies down to 4 kHz. For high frequencies up to 2 MHz we have our high frequency converter series HU.

Twopole and singlepole auxiliary voltage transformers designed to supply control cubicle with low voltage power.

The hermetic Transformer Protection Relay MCHD for hermetically sealed, liquid immersed distribution transformers without gaseous cushion in accordance with EN 50216-3. Each Hermetic-protection relay MCHD is individually tested for tightness and proper functioning.

Pressure relief devices for liquid-immersed transformers open in case of an internal fault and guarantee that the occured overpressure can properly release. Pressure relief devices close with decreasing pressure back to completely closed and leaktight position. Pressure relief devices for transformers can be installed in any position or inclination on the cover or the wall of a transformer. Upon request a transformer can be equipped with several pressure relief valves.

The magnetic oil level indicator 1 225 with vertical float movement is used for hermetically sealed transformers. The float movement is transmitted to the display by means of a magnetic clutch. This ensures that, in case of damage to the dome, no oil leakge of the transformer occures. The body is made of brass. The thread connection of the oil level indicator 1 225 is 1 ½".

The oil drain device Type C2 is used for oil sampling or emptying the transformer tank. The device is welded into the transformer case. The device is designed for use together with connection pipe F DIN 42551 for draining the transformer case for regeneration purpose of the oil. The oil drain device Type C2 is deisgned in accordance with EN 50216-4:2002 type C2.

Dehydrating breathers are being used for liquid immersed transformers in order to protect the insulating liquid and prevent the harmful moisture absorption from ambient air, which occurs when the load on the transformer fluctuates.The dehydrating breather removes practically all moisture from the air that flows through it into the conservator when the transformer is cooling down. This largely prevents any reduction of the dielectric strength and the formation of condensation in the expansion tank. Thus, the dehydrating breathers increases the operational safety of transformers.

The Buchholz Relay MBP in accordance with EN 50216-2 protects liquid immersed transformers and reactors with conservator. It will be mounted in the pipeline between transformer and conservator tank. The Buchholz Relay MBP operates as a protection device that can be provided with either two contacts or four contacts for alarm and tripping. Each Buchholzrelay is individually tested in a test facility for tightness and proper functioning.

Tavrida Electric's circuit breakers are the perfect match for applications like transformers or generators with a neutral earthing, server rooms and point on wave switching. The circuit breakers weigh less than 14 kg, meaning they can be installed quickly and cost effectively in even the smallest of spaces.

Hotdip galvanized steel mounting kit for Rec15/25 frontal and lateral pole installation. Mounting kit is applicable for all types of wooden, concrete or metal single poles and Hpole structures. Kit could include accessories for control cubicle pole mounting and up to two voltage transformers installation.

Common type wires and terminals to provide a reliable connection between auxiliary voltage transformer and recloser control cubicle.

Custom designed bird guards to provide a protection against wildlife and aggressive environment.

Protection The recloser protects against overcurrent, earth faults, over and undervoltage, over and underfrequency, current and voltage imbalances and many other problems. Measurements The recloser can measure phase, neutral and sequence currents, phasetophase and sequence voltages and threephase active and reactive power and energy. Key measurement data can be logged. Communications The control cubicle has various communication interfaces and can be connected with any third party modem via RS232/RS485 or the Ethernet using various communication protocols, including Modbus, DNP3 and IEC104. Large battery 48hrs operation battery, charged by smart battery charger and maintenance free for up to 10 years. Monitoring Highly comprehensive, remotely accessible separate log files for load and fault profiles, events, malfunctions, lifetime and change messages.

Challenge To execute a pilot project at the Energisa distribution network operator in Brazil within a tight time frame. The customer needed to install 23 kV outdoor circuit breakers with protection at a newly erected substation. Solution Tavrida Electric supplied the Rec25 with substation mounting kit to meet the deadline and satisfy the customer’s requirements in terms of protection. The mounting kit was subjected to comprehensive mechanical tests including overweighting, wind load and seismic impact with successful results.

Tavrida Electric recloser can be used to quickly build costeffective unmanned structure mounted outdoor substation. Provides full protection and automation functionality required at the substation.

Thousands of nodding donkey oil pumps were energized through an extensive and highly meshed overhead electrical network. Automated protection was performed only by the feeder CB at the substation. None of the line sectioning breakers were automated, so every single failure on the network required human intervention and led to significant outages. Solution Tavrida Electric installed and commissioned six Rec15 with Rezip* functionality on a single line in just one day. The following project outcomes were achieved Direct savings (outage time reduction → revenue loss reduction) Indirect savings (operation, maintenance, and repair cost reduction) Improvement of power supply quality and reliability Drastically improved network visibility and operator awareness *Rezip is an advanced Fault Detection, Isolation and Restoration (FDIR) algorithm

Radial line recloser When a recloser is installed on a radial feeder it automatically clears transient faults and isolates permanent faults. More than one recloser can be installed on a feeder to isolate faults selectively and ensure fewer customers are affected. Loop recloser A loop recloser further improves the reliability of a power supply by automatically reconfiguring a network in the event of a failure.

Sophisticated control and protection Tavrida Electric reclosers provide protection from various faults, including short circuits, earth faults, high impedance earth faults, broken wires, islanding, incorrect tap changer operations, network overload and over or undergeneration. Embedded RTU and metering ensures the reclosers are SCADAready with no additional expenses. TELARM® Dispatcher and DualSCADA TELARM® Dispatcher is proprietary remote control and monitoring system that works as a standalone SCADA and/or in parallel with an existing SCADA system, acting as a backup method of controlling and monitoring reclosers. TELARM® Dispatcher offers a number of features not available with most conventional SCADA systems, such as remote access to system logs, fault and load profiles and the remote control of protection settings. With maintenancefree design rated to perform 30,000 open and close operations, Tavrida Electric reclosers keep expenses to a minimum over their entire lifespan.

Continuous selfsupervision. Vacuum circuit breakers equipped with the CM16 control module continuously monitors control, switching modules, functional wiring and auxiliary power supply quality. CM16 eliminates the necessity of additional trip and close coils, charging mechanisms and all related wiring supervision. The whole trip and close circuit supervision comes in single package with any Tavrida Electric VCB. CM16 allows the user to forget about scheduled trip and close wiring inspections as in the event of malfunction corresponding notification will be sent to the operator using one of the inbuilt output relays and indicated by inbuilt in CM LEDs. Low power consumption. Vacuum circuit breakers equipped with the CM16 control module need less than 42 W in charging mode – just 10% of what the best alternatives available on the market need!

Tavrida Electric manufactures small, compact vacuum interrupters with an extraordinarily long mechanical and electrical lifespan. A specially designed axial magnetic field distribution provides an even current density over the contact surface, substantially improving the vacuum interrupting performance. Vacuum interrupter contacts have unique design, based on the mixture of copper and chromium metals and various dopants, to ensure long electrical life of contacts, low contacts resistance and chopping current. The patented, supercompact actuator design allows the circuit breaker to be installed directly underneath each pole. The design is optimal in terms of reliability, dimensions, weight and ease of installation. A spring charged by the magnetic actuator during the closing of the circuit breaker ensures main contacts pressure is maintained. The spring is integrated in the actuator and does not require any maintenance during the circuit breaker's lifetime.

Tavrida Electric has revolutionised circuit breaker design by developing a new generation of circuit breakers and controls with exceptionally fast opening, closing and response times. Opening and closing times are as low as 12 and 24 ms, respectively. This enables Fast transfer switches with transfer times as fast as 2 cycles. Such quick operational times allows very sensitive loads to operate without interruption in case of a main power source loss. The fast transfer switch solution eliminates costly downtime, reduces production equipment stress, ensures quick return on investment. Arc flash mitigation with interruption in one period. That quick interruption time increases operational safety, reduces switchgear restoration time and loss of productivity, limits switchgear damage and repair costs. Fault current limiting solutions without operational losses capable to automatically reconnect power sources.