Test device - Import export

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Various measurement devices of differing shapes are combined under the term Analysis Equipment. The leak testing device in its various designs and the flowmeters are supplemented by a hand-held measurement unit for industrial applications. A specially tuned analysis package (software package) is available for the differential pressure flowmeter.

Heating bath circulation thermostats with a stainless steel bath allow the temperature control of internal and external thermoregulation tasks. Items can be directly thermoregulated by placing them in a thermostat bath and the control of externally connected applications is also possible. The units are suitable for a number of typical temperature control tasks such as sample temperature control, materials testing, quality control, etc. The devices are fitted with overtemperature and low level protection in line with Safty Class III/FL according to DIN 12876. A powerful pressure/suction pump ensures optimal circulation and temperature homogeneity in the thermostat bath and also allows temperature control of externally connected applications using a pump adapter. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the...

Heating bath circulation thermostats with a stainless steel bath allow the temperature control of internal and external thermoregulation tasks. Items can be directly thermoregulated by placing them in a thermostat bath and the control of externally connected applications is also possible. The units are suitable for a number of typical temperature control tasks such as sample temperature control, materials testing, quality control, etc. The devices are fitted with overtemperature and low level protection in line with Safty Class III/FL according to DIN 12876. A powerful pressure/suction pump ensures optimal circulation and temperature homogeneity in the thermostat bath and also allows temperature control of externally connected applications using a pump adapter. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the...

Heating bath circulation thermostats with a stainless steel bath allow the temperature control of internal and external thermoregulation tasks. Items can be directly thermoregulated by placing them in a thermostat bath and the control of externally connected applications is also possible. The units are suitable for a number of typical temperature control tasks such as sample temperature control, materials testing, quality control, etc. The devices are fitted with overtemperature and low level protection in line with Safty Class III/FL according to DIN 12876. A powerful pressure/suction pump ensures optimal circulation and temperature homogeneity in the thermostat bath and also allows temperature control of externally connected applications using a pump adapter. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic...

The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. Typical main areas of application therefore include: — When normal resistors prove to be too large scale — For test and calibration of resistance measurement devices — For tests on electrical temperature measuring equipment — For laboratory setup of a Wheatstone bridge — As shunt resistor for accurate current measurement — As part of standard equipment in research laboratories — For a large part of measurements in calibration laboratory. Features: — Range 10 μΩ ... 100 kΩ — Low capacitance and low inductance design — Suitable for direct current and technical frequencies — High stability < ± 0.01 % over years

DPFR-004 Customized Solution for friction measurement of transmission A hand-held enclosure with integrated torque transducer, start buttons and 1 display for torque andf speed. Is used to the friction torque of tapered roller bearing set or monitor. portable Safety circuit by two-hand operation Constant load independent test speed

Customized Solution Component supply and emissions over hand-operated turret Application Quality assurance in the electronics industry. Batch testing; Test equipment for testing and optimization of weld two part housings of SMD components. Batch testing; Test device for checking and optimizing the welded connection on two-part housings of SMD components. Test device for small SMD parts Documentation of the maximum torque achieved and the tear-off angle. Documentation of the maximum achieved torque and angle of demolition.

Customized Solution The mobile testing device may be mounted directly on the wheel nuts on any wheel on the car. The height and tilt adjustment allows optimal orientation at the wheel. Additionally, it is still supported by three proximity sensors. The evaluation and control of the testing device accepts a laptop. For easy transport, the device can be disassembled in a few steps. Curve recording and analysis via notebook. The complete unit is height adjustable via a scissors system. This can also be adapted to different shaft height.

Mobile test device for detection of the maximum torque (drag indicator mode) and for the detection of the power range (constant load) of motors in dental and dental surgical application area. arbitrary loading curves endurance test speed ​​measurement in aluminum case permanently installed Calibration disc and calibration will be in the trunk.

Friction measurement on gear with cam recording with service case In order to reduce the frictional torque in a gearbox from the automotive industry, a measuring device that accompanies the development is required. With the DPFR-027, changes in the design can be measured directly on the product. This means that even the smallest improvements can be determined. The field of application of this test device is extremely diverse and can be easily converted to other applications. Thanks to the mobile design, tests can be carried out under different temperatures and climatic conditions. hand-held drive unit compact slim design constant load-independent test speed selectable direction of rotation and speed additional storage to eliminate lateral forces Acquisition of torque and angle of rotation Graphic recording of the test sequence Storage of the test results in Excel

The process photometer ZPM measures the transmission of optical transparent materials like silica, glass, crystal, or plastics plates. The influence of ambient light is minimized by using a modulation technique. This is of special importance for the measurement of scattering samples. Yoke photometers measure at a fixed wavelength between 254 nm and 980 nm or with selectable wavelengths, for example, red (630 nm), green (520 nm), and blue (470 nm) for ZPM RGB. Our range includes more than 30 wavelengths; thus, the photometer can be optimally adapted to the application. Transmission data are steadily shown on the display. Measuring data can be read by a computer or PLC (optionally) manually or after being triggered. The device under test can be adjusted and fixed using the optional alignment table. We also manufacture individual yoke photometers for scattering samples or custom sizes. You can take advantage of the modular base unit and our in-house CAD-CAM production.

The transducer is suited for the most varied measurement duties on threaded fasteners, to check and adjust assembly tools, like screwdrivers and spanners, and to sense loosening torques, etc. It can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the electrical output is wireless, as well. Hence, there is practically no wear on the device. This sensor is suited for cyclical as well as continuous testing of tools. As the sensor is designed to be torsionally rigid any errors due to it are minimized. No service needed because of contactless data aquisition High interference immunity due to amplified active signal High accuracy due to frequency modulation and strain gage technology Power supply Optional angle detection torque ranges from 1 Nm up to 10.000 Nm torque with square drive with or without angle (w) function Variant bracket for quick assembly

Probe Buddy™ is a smart testing device that checks the integrity and health of an oxygen probe from United Process Controls and from other manufacturers. It’s also used to imitate the output signals of a working probe to check the scaling and operation of the process control system. FEATURES &amp; BENEFITS • Troubleshoot problems with your probe and control system • Assess the probe’s usability and performance • Verify controller’s input performance • Eliminate unneeded replacement of non-defective probes • Hand-held device operates as a probe test meter and a probe signal simulator • Enables non-expert to perform probe troubleshooting procedures like an expert • Accepts selectable TC and mV inputs from any oxygen probe • Outputs selectable TC and mV signals to simulate an oxygen probePerforms a probe impedance test when connected to a probe • Computes carbon, dewpoint or oxygen in input or output mode • Specific probe connection cables available, no hard wiring required

The future in the pad printing process lies in the integrated cliché production using laser engraving. The pad printing machine HYBRID 90-2 combines the concept of the ”hermetic” pad printing with the flexibility of the digital data for cliché production. Thanks to the software ALFALAS® Laser Suite which was specifically developed for this purpose, the cliché production takes place in the HYBRID 90-2. Automatic changeover of print motifs takes place in a matter of seconds. A multi-color print motif will be directly produced with precise register setting. The control of the HYBRID 90-2 iTAMPOPRINT is already prepared for the use of the software iTAMPOPRINT. This offers the possibility to connect the pad printing machine for example to an ERP system in order to allow a complete data management. In addition, it is possible to process external information of camera systems, testing devices etc.

The Zwick analog shore hardness tester is a testing device with a pointer. Due to its pointer, this tester can be used to measure value that is shown after the test in hard-to-access locations. Also, it can work in tests such as soft rubber, elastometers and natural rubber to Shore A. For tough materials, these includes harder elastomers, plastics and rigid thermoplastics to Shore D. This tool can work with either material that has different hardness rating coming from shore A up to Shore D. Plus, this test device have load weight and control unit which can be easily accessible.

The Kappa creep testing machine is a flexible and highly-precised creep testing machine used for maximum cost-effectiveness. It is fully equipped with a test frame having four steel columns for high lateral and axial stiffness. It is powered by top-quality components that includes testXpert® II testing software and test control measurement and control devices. It has attained success due to its successful installations worldwide. It features an intelligent sensor technology which recognizes and calibrates all the sensors that are connected including their projected force limits and environments. It generally focuses on the most essential requirements of creep testing which include load, temperature, strain and data security.