Spirals - Import export

Plastic spirals are used to hold cables together and sort them.

Support spirals are inserted into the hose to prevent the hose from kinking

Our product range includes spiral hoses, PA / PUR / PE hoses, PVC hoses with and without fibre, soft PVC hoses, fibre reinforced PUR hoses and PTFE hoses. Furthermore we offer anti-static hoses, spark erosion protected PU hoses, compressed air hoses, autogenous hoses, suction and pressure hoses and hoses especially for use with water. The assortment is rounded out by hose rupture valves, hose winders and cable winders, hose terminal blocks, hose cutters and hose holders. For every intended use we have the right material and the matching hose size.

HIGH QUALITY AND SAFETY STANDARDS LIPP brings over 55 years of experience in the field to every project, helping to meet the most demanding safety and quality standards that will deliver profitability and reliability. Proven technologies, such as the spiral LIPP Double Seam System and Verinox material, have been developed and proven to deliver both flexible and efficient storage systems. Tanks are erected via a construction method exclusively employed and developed by LIPP, delivering customizable tanks for any application with a volume of 10,000m3 or more. Perfectly matched to the purpose of each installation, each tank incorporates large volume with a customized interior. LIPP understands that adaptability provides solutions for various applications and requirements – so customers can even specify their own services to lower the total cost of investment.

Universal stainless steel exhaust system accessories. Everything you need to build your own exhaust system. Holder or lambda probe thread up to the exhaust spring, which are used for slip on exhaust systems.

Takeover of the Torus gear technology In September 2016, MS-GRAESSNER GmbH & Co. KG acquired the entire technical expertise of TEDEC AG, Zofingen/Switzerland. Read more ... This results in an ideal synergy effect: state-of-the-art gear meshing technology combined with many years of experience in gear engineering. The further development of the TORUS gearbox (TorusGear), including series development, is thus guaranteed - also from the perspective of customer-specific applications. The owner-managed company MS-GRAESSNER GmbH & Co. KG is a manufacturer of high-precision servo angular gearboxes, with over 60 years of experience in drive technology. The products are used in particular in the fields of automation, robotics, electromotive, and mechanical and plant engineering.

For use on water pumps and gravel washing systems. To transport water or water-sand mixtures with low sand content in the pressure and vacuum area. Very flexible and inexpensive hose with long service life. Construction: Abrasion-resistant tube Tension and pressure-resistant fabric inlays Optional: Concealed steel spiral UV, ozone and weather-resistant cover Interior smooth, exterior smooth or corrugated *) Spiral hose version Supplied by the roll or cut to length with fittings and/or widened hose endings or built-in flanges. Other versions and dimensions on request.

Highly flexible and compressible hose to handle liquid, solid or gaseous media in especially cramped installation conditions, or where high axial and lateral movement is required. Good bending radius of R= D x 1,5 – 2, compressible to approx. 50% of total length. For information on temperature and media resistances please see our Simon resistances chart. Construction: Tube in special quality depending on the medium to be transported Fabric inlays Optional: Embedded copper wire Concealed steel spiral UV, ozone and weather-resistant cover Interior and exterior corrugated Cut to length with cuffed ends and/or widened hose endings. For higher pressures on request. Other versions and dimensions on request.

To handle solid, liquid and gaseous media in the industrial field. Especially flexible and light version for easy handling. Small bending radius of R = ca. D x 3. For information on temperature and media resistances please see our Simon resistances chart. Construction: Tube in special Quality Fabric inlays Optional: Embedded copper wire Concealed steel spiral UV, ozone und weather-resistant cover Interior smooth, exterior corrugated Cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

Liquid gas hose per DIN EN 1762 (LPG), however with embedded spiral for smallest bending radiuses and very easy handling. For propane, butane and other liquid gasses per DIN 51622. Also suitable to transport gaseous media. For information on temperature and media resistances please see our Simon resistances chart. Construction: Black, electrically conductive special tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral Pin-pricked, weather-resistant, electrically conductive, abrasion-resistant cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length. Available as drum-windable or simple loading or drainage hose, also without spiral. Other versions and dimensions on request.

The STS-spiral roller brush range from Kullen-Koti contains all measurements from small to extra large and this unbeatable selection of diameters makes this brush a totally reliable tool for light brushing tasks. Due to the high fill density and precisely ground surface it achieves outstanding results. A flawless radial true runing is a requirement in most cases to achieve the desired brush effect. Therefore the brush cores are electrodynamically pre-balanced and re-balanced according to the required RPM after assembly of the spiral brushes. The balancing quality refers to quality grade G 2.5 as per ISO 1940. As core material we have available: mild steel, stainless steel, non-ferrous metal or plastic coated steel. Fixing of the spiral coils The coils are generally mounted onto the roller cores with pressure rings (PRB) in order to prevent the brush from roating on the core. Depending on the work and the rotation speed of the brush the coils can also be spot-welded or screwed...

A very interesting aspect of our STS-spiral coils is the type with inverted fill material that is used, for instance, for polishing, descaling or removal of corrosion off rods or wires in a continuous operation. With an outside diameter of only 20 mm it is possible to reach an inner diameter of zero. Offering an enormous choice of dimensions and fill material qualities this brush has almost unlimited applications. The pioneering of this brush type has left its mark and shows in every detail of this brush. The diagram below shows how the STS coil is constructed: the fill material is fixed with a locking wire inside the backing tape. Available backing tapes We manufacture our STS-spiral brushes in eight different coil widths (WB) from 2,5 - 13,5 mm. As material we use mild steel, stainless steel (1.4301 or 1.4571) or brass. Variety The STS-spiral coil offers an enormous choice of dimensions in fill material, fill configuration, fill density.

Our roller brush coil designed as welded package system will also pack the tiger in your tank! Why is it reasonable and advantageous to purchase a welded package system type 231? Each face width of a roller brush needed can be divided in a corresponding number of single, compact segments, called packages, that are not only loosley coiled spirals. What we produce are light and easy-to-handle packages with a constant high density which facilitates and accelerates the equipping of a brush core or shaft carried out by yourself.The welded package system is not only easy to mount but it also makes you independent of any transportation of the core to the supplier for refilling, packing, delivery times etc. and helps you out of emergency situations.For the core constructions the following materials are available: plastic-coated steel, steel, stainless steel (1.4301; 1.4571; 2.4879). The twin tape mounting is designed as a concave backing system where the coil widths (WB) ranges between...

Back in 1931 the history of an inimitable brush began: Kullen-Koti was already the patentee for this spiral brush with a double-sheet backing tape. Since then we have been developing this brush type and have manufactured the most variations. But one thing always remained the same: the double-sheet backing tape. Because of our experience, this system is the most effective and safe method. See our illustration which shows you the construction. Available brush sections: We manufacture our spiral brushes with four different section types in backing widths (WB) ranging from 4 mm to 18 mm. According to your requirements we choose the appropriate backing width considering the essential parameters: core diameter, fill material, fill density and working conditions. We supply backing tapes in bright steel as well as galvanised steel or stainless steel and acid/heat-resistant steel quality 1.4301, 1.4571, and 1.4541 (AISI 304, 316Ti) Manifoldness The roller brush coils with roller core are...

Features • Without pre-drilling in gypsum plasterboard • Screw in directly • No special tool required • In gypsum fibreboards high holding values up to 20 kg per fixing point • Also suitable for M4 screws Description & Area of Application • Metal wall plug (zinc die-cast) with drill tip and pronounced external thread • Also suitable for double-layer gypsum plasterboard • PH2 driver for easy installation • Spiral Plus + Screw: Screw with PH2 driver

Features • Without pre-drilling in single-layer gypsum plasterboards • No cracking of the surface due to special thread geometry • In gypsum plasterboards high holding values up to 8 kg per fixing point • PZ2 driver for simple installation Description & Area of Application • Glass fibre reinforced gypsum plasterboard wall plug • Reinforced drill tip for easy installation without additional setting tool • For single layer gypsum plasterboards • Spiral + screw: Screw with PZ driver

Forget everything you know about miniature gears. Dimensions, weight, precision – the new Power Gear Miniature sets new standards. PowerGear Miniature has a sensationally small installation size, an extremely light-weight aluminium housing, maximum performance and precision as well as many other advantages. The unique design of PowerGear Miniature will open up a vast range of applications in drive technology. miniature gear for maximum precision low backlash and high transmission accuracy case-hardened bevel gear tooth system friction-locked shaft-and-bevel-gear fit energy-efficient through high level of efficiency of 98% extremely light-weight aluminium housing maintenance free through synthetic oil

The STS-spiral coil is the only brush type that can be produced with very small diameters starting at an overall diameter of 17 mm. Offering an enormous choice of dimensions and fill material qualities this brush has almost unlimited applications in light or medium work. The long period of development of this brush type has left its mark and appears in every detail of the brush. The diagram below shows how the STS coil is constructed: the fill material is fixed with a locking wire inside the backing tape. Available backing tapes We manufacture the STS-brush in eight different coil widths (WB) from 2.5 mm to 13.5 mm. As material we use mild steel, stainless steel (1.4301, 1.4571) or brass. STS-spiral coils can be supplied for self installation, as well as a complete roller brush with shaft. Variety The STS-spiral brush offering an enormous choice of fill material, fill arrangements and fill densities. Depending on the fill material and dimension we can also increase the density by...

Designed for special requirements – no adaption, no compromises: There are decades of engineering expertise of MS-Graessner in the newly developed Power Gear HS series. Thus each individual component was consistently developed and designed to meet the requirements at the highest speeds. With a multitude of benefits for a variety of applications and fields of application. Gearbox for highest speeds For dynamic servo drive-train units Higher permissible thermal performance limit Low backlash and high accurate transmission Motor mounting via coupling an lantern Friction-locked fit between shaft and bevel gear Suitable as pre-stage for coaxial gearboxes Energy-saving due to high efficiency rating of 98% Technical overview Sizes S90, S110, S140, S170 Configurations L, H, KL, KH Ratio i = 1,0 / 1,5 / 2,0 Shaft arrangement WA 1, WA 3, WA 13 Input speed n 1max up to 8500 min -1 Motor mounting Via coupling and lantern (KL/KH)

The standard bevel gearbox Power Gear P-Version shows it’s strength in applications which depend on the following characteristics: High torque at smaller to medium input speeds Limited weight and smallest dimensions Sturdy, reliable and maintenance-free design Technical overview Sizes 12 gearbox sizes from P54 to P450 Configurations L, H, FL, FH Ratios from i = 1:1 to 5:1 Shaft arrangement WA 1, WA 3, WA 13 Input speed n 1max up to 7500 min -1 Motor mounting direct mounting with hollow shaft/flange

A further variation of the "Throw-Away" system is type 230. It consists of continuously wound DBS-spiral brushes fitted to a thin walled steel, stainless steel or non-ferrous metal tubular shaft. The face width corresponds to the required total brush legth (BLG). The complete "Throw-Away" brushes can be simply assembled onto the customer's existing shaft. This method avoids the costly return of the complete shafts when the brushes have to be replaced. Core systems The complete "Throw-away" brushes type 230 can be supplied with adaptors to reduce the core inside diameter (KD) i. e. brushes with or without collar with suitable arbor holes (AL) for the different core systems WK1 and WK2. Our roller brushes are supplied with a fill surface perfectly trimmed and/or ground for concentricity. The brushes with adaptor or bushes are electro-dynamically balanced at the intended rotation speed according to standard G 2.5 as per ISO 1940

The types 220 & 221 are extremly flexible in their dimension and depending on the required performance these endless spiral brush coils are mounted on core systems made of mild steel, stainless steel or non ferrous metals.Compared with other brush designs we can reach the highest possible fill density with these types and they can be applied with a maximum speed of 55 m/sec without any problems. Supposition for it, is that the roller brush cores are electrodynamically balanced after the mounting of the core according to the required rotation speed and quality G 2.5 which comes up to ISO 1940. Our roller brushes are supplied with a fill surface perfectly trimmed and/or ground for concentricity. A perfectly seated attachment of the coils on the roller core is guaranteed by the pressure or mounting ring (PRB) system, also available with removable balancing weights (PRB-AW), which prevents the brush coil from rotating on the core. In some circumstances you also could choose a...

The PERFECT cable gland made of nickel-plated brass with spiral top is the perfect protection of flexible cables when inserted into enclosures. Features: — reduces bending loads — protects against cable core break — integrated anchorage — protection against twisting — wide sealing and clamping range — available in 3 sizes: M16, M20, M25 — for cables from 5 to 16 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — protection grade IP68 - 5 bar

The PERFECT cable gland with spiral top is the perfect cable entry solution for movable flexible cables. Features: — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 18 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 - 5 bar — Test standard UL 514B — with metric, Pg- or NPT-thread

wege® - the flexible cable gland system in brass, stainless steel and plastic. material: PA 6.6, colour: light grey (RAL 7035), sealing ring: CR, protection class: IP66/IP68 - 5 bar, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -20 °C to +90 °C, connection thread: M12 - M32, PG7-PG21, G ", additional information: available colours are light grey (RAL 7035), jet black (RAL 9005)

Our WGN is a hollow-shaft right angle gearbox that operates with particularly low noise levels. At the same time, the spiral teeth increase the quality of your workpiece surfaces. It can be connected directly to the application via a shrink disc, a simple and reliable solution that offers you new design possibilities.