Special bearings - Import export

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2 * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

The pump set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of alkaline solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid etc. acetic acid etc. * Pump unit equipped with Lutz original handwheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & benefits * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants lubricants * Optimised drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of acids.* Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of acids. * Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The Drum pump is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suitable for the withdrawal or decanting of solvents, optionally available with Ex-plug. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * Approved according to ATEX directive 2014/34/EU, category ½

Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of caustic solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid, etc. * Pumping unit equipped with Lutz Original handwheel * suitable for filling or transferring oils such as rapeseed oil and vegetable oil Features & Advantages * optionally with electric or compressed air drive * no lubricants and therefore no contamination of the pumped medium by lubricants * optimized barrel emptying * universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump can be replaced

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

100.000 rpm and an elastic spindle support mean you achieve anoptimal surface quality when working on metallic materials. Noise emissions are also low. Thanks to the turbo drive it can be operated without lubrication (oil-free). No chatter marks also with finest deburring jobs. The TVD 3-100/3 ULTRA is distinguished by special hybrid bearings (steel/ceramic), which lead to a significant improvement of the service life in almost all application areas.

Facts: Compact design with a single suspension spring Freely rotating and swivelling screw-type spring hook for suspension Housing and housing cover of high-strength chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings • High-strength special suspension spring • High-strength steel cable • Infinitely adjustable cable stop buffer • Infinitely variable load setting via endless screw Safety: Closed unit Rigid, impact-resistant design Suspension via screw-type spring hook (rotating and swivelling design) Includes safety expansion chain as fall protection Integrated mechanism for locking the cable drum High-strength special suspension spring Spring fracture safeguard is standard Cable overload protection via cable extension limit stop Screw-type spring hook for load suspension GS-certified

Facts: reely rotating and swivelling screw-type spring hook for suspension Housing and housing cover of chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings High-strength special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Available without (Type 7235) or with (Type 7236) ratchet lock Safety: GS Certificate / DIN15112 / Made in Germany

The PFHE represents an economically attractive alternative for high-load applications in which high radial loads occur. The combination of special pre-stressed inclined roller bearings and a flanged output shaft in accordance with EN ISO 9409-1 gives the PFHE a very high load capacity. Thanks to the radial shaft seal that is used, this gearbox achieves protection class IP65 at the output side and can therefore also withstand adverse usage conditions.