Sealing pump - Import export

The universal Drum pump with mechanical seal F/FP 430 can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on plastic models (PP and PVDF). This always allows full function of the mechanical seal. This way, leakage and unnecessary wear are prevented for the complete operating temperature range. Furthermore, it provides highest stability and makes immersion lengths of up to 3 000 mm possible. The versions in stainless steel and hastelloy C are ex-protected. The stainless steel version is also available as FOOD certified version.

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for withdrawing or transferring concentrated acids and alkalis. * Examples of media: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. *Pump tube equipped with Lutz original handwheel *1 battery charge = 12.6 x 200 liter container in 14 min* * determined with pumping unit PP 41-L DL at full speed Features & Advantages * wear-free, particularly low-noise BLDC motor * optimized drum emptying * infinitely variable * extremely high performance with low weight * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * long service life

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of acids.* Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of acids. * Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The Drum pump is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suitable for the withdrawal or decanting of solvents, optionally available with Ex-plug. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * Approved according to ATEX directive 2014/34/EU, category ½

Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of caustic solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid, etc. * Pumping unit equipped with Lutz Original handwheel * suitable for filling or transferring oils such as rapeseed oil and vegetable oil Features & Advantages * optionally with electric or compressed air drive * no lubricants and therefore no contamination of the pumped medium by lubricants * optimized barrel emptying * universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump can be replaced

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.

Pre-assembled pump kit to pump different media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube in stainless steel, hose, hand nozzle and compression gland. Driven either by commutator motor F 460 or compressed-air motor F 416. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools into two parts Benefits: - Easy disassembly - Universally and flexibly applicable - Easy to clean as no medium can get into the inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube material aluminium, optionally with commutator motor FEM 4070 (500 Watt) or commutator motor F 457 (800 Watt) available; furthermore are enclosed: hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart into two parts without tools Benefits: - Easy disassembly - Universally and flexibly applicable - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump kit to pump foaming agents, low concentrated acids, low concentrated alkalis of 200 l drums (immersion length 1000 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor F 458, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools - Inner tube with steel core - prevents longitudinal changes at high or low temperatures Benefits: - Easy disassembly - Universally and flexibly applicaple - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump kit to pump acids of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools - Inner tube with steel core - prevents longitudinal changes at high or low temperatures Benefits: - Easy disassembly - Universally and flexibly applicaple - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden

Pre-assembled pump kit for 99,98 % drum emptying. Due to integrated backflow stop less than 0.05 l residual amount in 200 l drum possible. For pumping thin media out of 200 l drums (immersion length 1000 mm) or IBCs (mmersion length 1200 mm). Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas. Product attributes: - Pump with mechanical seal - Switch lever to close the backflow valve / foot valve - Pulsation-free transfer - Transfer against closed valve (e.g. hand nozzle) possible - Radial shaft sealing ring prevents intrusion of vapours and liquids into the coupling area Benefits: - Less than 0.05 l residual amount left in 200 l drum - Universally and flexibly applicable - Reduction of cleaning and waste disposal costs - Optimal use of fluids - No loss of medium when taking the pump from drum to drum

The withdrawal system can be used to dispense high-purity liquids quickly and without complications. An excess pressure is produced in the container with pressurised gas (compressed air or nitrogen), thereby pumping the liquid out of the tank. The advantage of operation using pressure gas is that the user can extract even large amounts without effort while having both hands free to dispense the solvent. In this way, large amounts of hazardous media such as acetone, ethanol and methanol, etc. can also be safely dispensed and accurately metered using the stop cock. For use with media sensitive to oxygen or for ultra-pure media, operation with an inert gas (e.g. nitrogen) is possible. The barrel screw connection and shut-off valves seal off the barrel and pump hermetically. This means that no vapours containing solvents can escape after dispensing, thereby protecting users' health and the environment.

Pre-assembled pump kit for food and pharma in ex-version. The pump-kit is ideal for frequent medium changes and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Comprising drum pump FP 430 Ex FOOD, outer tube stainless steel, commutator F 460 Ex, hose, hand nozzle, hose connection, compression gland and earth cable. Product attributes: - With mechanical seal for sealing the inner tube - Pump can be disassembled into two parts: inner tube cpl. and outer tube - Grease-lubricated shaft bearing Benefits: - Ideal for frequent medium changes, hardening media, fast drying media, crystallizing media - Can be taken apart into main components easily and quickly for cleaning - Compared to sealless pump higher service life on abrasive media - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21

The T Pump Series is particularly suitable if containers or dipping baths cannot be flange connected to the side or if dry run in the plant cannot be excluded. Materials: PVDF (polyvinylidene fl uoride) or PP (polypropylene) Immersion depth: 200 - 800 mm Max. output rate: 280 l/min Max. discharge head: 28 m Motor power: 0.18 - 5.5 kW Advantages: » absolutely dry run safe (no contact of mechanical parts) » highest chemical resistance » robust, thick-walled design » long-lasting and abrasion-free » design for the operation under demanding conditions » open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible) » no abrasion into the medium to be pumped (high purity applications) » no metal parts are in contact with the medium » easy to maintain » universally applicable, quiet and compact » various chemical resistant materials can be supplied from the warehouse

The UP Pump Series is designed for all sorts of applications and is perfectly suitable for the transmitting operation in stainless steel plants as well as for severe temperature stress. Material : Stailess steel 1.4581 Max. output rate: 460 l/min Max. discharge head: 39 m Motor power: 0.18 - 5.5 kW Advantages: » available with single- and double mechanical seal » the highest chemical resistance also at high temperatures up to +150° C » robust, thick-walled design, solid stainless steel fine cast (no thin-wall-deepdrawing sheet metal) » low-maintenance through an optimal adaptation to the medium to be pumped » long-lasting and wear resistant, various types of designs for almost all operating conditions » open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible) » easy to maintain (wear parts and the mechanical seal can be changed swifly) » universally applicable, quiet and compact » also available for combustible environments, explosion proof

The U-Do Pump Series is a universally applicable all-rounder. The design and manufacturing materials allow for optimized adaptability for the many different operating conditions as well as for the various media to be pumped. Materials: PVDF (polyvinylidene fluoride) max. output rate: 500 l/min max. discharge head: 40 m motor power: 0.18 - 5.5 kW Advantages: » available with single- or double mechanical seal » applicable also for media to be pumped that do not have any lubricating properties (e.g. varnishes and paints) » the highest chemical resistance » robust, thick-walled design » long-lasting and wear resistant, various types of designs for almost all operating conditions » open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible) » easy to maintain (wear parts and the mechanical seal can be changed swiftly) » universally applicable, quiet and compact » various chemical resistant materials can be supplied as stock items