Sealing pump - Import export

can work in wide viscosity range Strong contruction High capacity and high efficiency Heat protection for fluid Low risk of cavitation USAGE AREAS Chemical Industry Food Industry Colour Industry Petroleum Chemical Industry Ship and shipping Industry OPTIONS Threaded connection Heat Jacket

can work in wide viscosity range Strong contruction High capacity and high efficiency Heat protection for fluid Low risk of cavitation USAGE AREAS Chemical Industry Food Industry Colour Industry Petroleum Chemical Industry Ship and shipping Industry OPTIONS Threaded connection Heat Jacket

can work in wide viscosity range Strong contruction High capacity and high efficiency Heat protection for fluid Low risk of cavitation USAGE AREAS Chemical Industry Food Industry Colour Industry Petroleum Chemical Industry Ship and shipping Industry OPTIONS Threaded connection Heat Jacket

can work in wide viscosity range Strong contruction High capacity and high efficiency Heat protection for fluid Low risk of cavitation USAGE AREAS Chemical Industry Food Industry Colour Industry Petroleum Chemical Industry Ship and shipping Industry OPTIONS Threaded connection Heat Jacket

without shaft seal streamlined housing made of PP or ETFE volume flow of up to 230 l/min delivery head of up to 29 m.WG back pull-out

without shaft seal Robust and casted casing CARTRIDGE UNIT for fast and easy maintenance Temperature up to 120°C (higher temperatures are possible) Close coupled, single stage, back-pullout-design Universal DIN/ANSI connection Suction port DN40 Discharge port DN25

Our products include Villina-GNGC-2T type centrifugal horizontal pumps with tandem mechanical seals type according to your parameters. These are used for transit in stationary conditions of neutral, corrosive, toxic, as well as explosive and fire hazardous liquids, the vapors of which can form explosive mixtures with air. The units are mainly used by petrochemical industry companies. Parameters of operating fluids (liquids): temperature from -50oС to +400oС viscosity up to 160 cSt density 2,000 kg/m3 max, with a high concentration of particles particle size over 0.2 mm, but not exceeding free passage of the impeller (3 to 12 mm depending on the pump rate) For such conditions, mechanical seals (operating temperature up to 425°C) of well-known companies are used, such as: OOO NPC ANOD, JSC TREM ENGINEERING, UNICHIMTEK Group of Companies and others DESIGN FEATURES The unit consists of a pump, a base plate, an electric motor, a casing and a support system.

can work in wide viscosity range Strong contruction High capacity and high efficiency Heat protection for fluid Low risk of cavitation USAGE AREAS Chemical Industry Food Industry Colour Industry Petroleum Chemical Industry Ship and shipping Industry OPTIONS Threaded connection Heat Jacket

The universal Drum pump with mechanical seal F/FP 430 can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on plastic models (PP and PVDF). This always allows full function of the mechanical seal. This way, leakage and unnecessary wear are prevented for the complete operating temperature range. Furthermore, it provides highest stability and makes immersion lengths of up to 3 000 mm possible. The versions in stainless steel and hastelloy C are ex-protected. The stainless steel version is also available as FOOD certified version.

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data.

CHAMBER VACUUM PACKAGING MACHINE DZ 410 T - VERTICAL Vacuum packaging machine for packaging in vertical envelopes containing coffee, rice, tea, powder products, fluid products, etc. The machine is built in stainless steel (AISI 304) and equipped with an electronic volumetric sensor with 3 programs digital panel. The compact size chamber and the vacuum pump with a capacity of 20 m3/h. ensure high productivity. Also available with filter for packing powdery products such as hazelnuts flour, milk powder and products with similar characteristics. The filter must be requested at time of order. The packaging machine is equipped with a painted wheeled support. Max thickness bag mm. 0.20 (0.8 total with bellows). By equipping the machine with jigs realized according to the specific dimensions of the product to be packaged, it is possible to obtain squared packs. The templates are not included with the machine.

Vacuum packaging machine with trolley and double lateral sealing bars, made of stainless steel (AISI 304). Equipped with digital panel and volumetric electronic sensor for the steady control of vacuum. Volume increased chamber and convex lid for a max eight of 250 mm. The vacuum pump of 40m3/h with three-phase 380V motor ensures high productivity. The two side bars with a length of 60 cm allow to pack more bags simultaneously (on one or both of the bars), reducing packing times. Is however possible to use it with a single bar. The DZ 600 2S packaging machine is also used for the vacuum seal and the jars of creams, jams, etc .. The vacuum chamber utilizes specific smooth envelopes for vacuum. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar.

VACUUM PACKAGING MACHINES DZ 500 T - BIG CHAMBER Bench vacuum packaging machine with front sealing bar, made ​​of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that assures a steady control of vacuum. The bigger chamber with rounded lid allows the packaging of products with max. eight of mm. 180 and the vacuum pump from 20 m3 / h. ensures high productivity. Also available DZQ with gas inlet valve (modified atmosphere). Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

TABLETOP VACUUM PACKAGING MACHINE DZ 400 T WITH INCREASED TANK Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. The tank of increased sizes with rounded lid allows the packaging of products with maximum height of 180 mm and the vacuum pump with a capacity of 20 m3/h ensure high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

TABLETOP VACUUM PACKAGING MACHINE DZ 260 T Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. This machine, with compact size, low consumption and a very short cycle time, is suitable for both the alimentary than for technical articles. The tank of modest size and the vacuum pump with a capacity of 8 m3/h. ensure high productivity.

TABLETOP VACUUM PACKAGING MACHINE DZ 400 2T WITH TWO SEALING BARS Tabletop vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2 * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for withdrawing or transferring concentrated acids and alkalis. * Examples of media: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. *Pump tube equipped with Lutz original handwheel *1 battery charge = 12.6 x 200 liter container in 14 min* * determined with pumping unit PP 41-L DL at full speed Features & Advantages * wear-free, particularly low-noise BLDC motor * optimized drum emptying * infinitely variable * extremely high performance with low weight * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * long service life

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of alkaline solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of acids.* Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available with Ex - plug * Pump tube equipped with Lutz original handwheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * Approved according to ATEX directive 2014/34/EU, category 1/2

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of acids. * Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of alkaline solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

The Drum pump is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suitable for the withdrawal or decanting of solvents, optionally available with Ex-plug. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * Approved according to ATEX directive 2014/34/EU, category ½

The Drum pump is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suitable for the withdrawal or decanting of solvents, optionally available with Ex-plug. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * Approved according to ATEX directive 2014/34/EU, category ½

Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of caustic solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid, etc. * Pumping unit equipped with Lutz Original handwheel * suitable for filling or transferring oils such as rapeseed oil and vegetable oil Features & Advantages * optionally with electric or compressed air drive * no lubricants and therefore no contamination of the pumped medium by lubricants * optimized barrel emptying * universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump can be replaced