Rollers - Import export

The container rollers 4337.3,5 with a load lift of 3,5 tons, for lifting and moving standard containers. Can be used on solid ground. The roller set consists of four corner brackets and a drawbar. This product is suitable for an operating speed of up to 6 km/h.

The RA line descripes a roller beared slide in a special sealed version. The standard type is equipped with a gap seal (approx. 0.5 mm). Special types with felt or nylon scrapers are possible, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 mm scale gradation. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RK line is equipped with a cross type handle and, from size 300 on, with a hand wheel. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RM line The RM line is equipped with a knurled micrometer knob of a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, be delivered with a 0.01 mm scale gradation, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

The RE line is equipped with end plates and suits for the attachment of stops, micrometers, cylinders etc. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.

Generally speaking, guide rollers come in two different varieties: guide wheels and running wheels. Guide wheels are used in machines or gates to facilitate linear motion. These wheels are usually put under frequent but brief loads. Running wheels, on the other hand, are designed to withstand constant and consistent loads. They are frequently used in conveyor systems. Blickle provides a total of seven different product series with different polyurethane and nylon treads and steel or nylon wheel centres to suit a wide variety of applications and requirements. We are also an excellent partner if you need an individual customised solution. Please contact your personal adviser to find out more!

The new designed rotary swivel unit RT2A is the ideal solution for retrofitting your machine with a 4th and 5th axis. It is based on the proven and robust rotary tables of the RT2A series. The design is kept very compact to ensure the best possible use of space with high load capacity. The rotary tables are equipped with an integrated precision roller bearing, which ensures high torque capacity, radial and axial run-out accuracy. The rotary swivel unit RT2A is available in the size variants RT2A150/200 and RT2A100/150. Various stepper or servo motors can be used as drives. In addition, various types of end or reference point switches are available. The swivel range of the swivel axis can be individually defined, the rotary axis can be rotated without limit. Thus the RT2A rotary swivel unit combines all the advantages of a field-proven standard product with the flexibility of a special version.

Rotary tables with direct drive series RT3 The rotary tables with direct drive are available in different types: RT3A100x100, RT3A100x155, RT3A080x130, RT3A150x100, RT3A150x130, RT3A250x170, RT3A200x060 und RT3G630x225 Rotary tables RT3G630 – high dynamics, high precision, high loading capacity This direct driven rotary table RT3G630 has particularly been developed for machine tool industry and assembly machines. It is characterised by its high precision, highdynamics and its high loading capacity. The rotary table is driven by a permanently excited 3-phase synchronous motor. The rotary plate and the housing are made of gray cast iron.

While the conventional drives are dependent on an external controller unit, for the compact drives no additional controller is needed. The complete electrical parts, including the drive controller and encoder, are integrated on the motor board. Programming is done via standard PC using free software. The operation can be done without a PC, the created driving programs are stored in the compact drive and can be accessed via a separate input. Compact design Integrated motor controller and encoder RS485 or CANopen Interface Operating modes: positioning, speed, flag-position, clockdirection, analog, analog position, torque Position monitoring with automatic error correction up to 0,9° Step resolution max. 1/64 Integrated temperature monitoring Step frequency 0-50 kHz at clock-direction-mode and 0-25 kHz at the other modes

The series of RT2A distinguishes by compact design with integrated precision roller bearing and worm drive. The rotary tables are sealed, IP 50 and can be driven in all fitted positions. For the mounting, standard drilling plans and special mounting flange and clamps can be used. Different limit switches are available: Standard: reference impulse, PNP-NC, 2 channel.

This multisided applicable precision rotary table is available in installation size of 300 mm of rotary plate diameter. The rotation plate is stored by a tempered roller-bearing. This enabled high moment rigidity within the radial and axial range as well as free positioning at less friction moments. The drive takes place alternatively via stepper- or AC servomotors by a hardened and polished precision worm with a worm wheel of bronze. The rotary table is horizontal and vertically applicable by standard drilling plan and bolting face.

Type MR - roller bearing mounted slide /Typ MS - dovetail slides Positioning accuracy: 0,001 - 0,1 mm according to the spindle used and the feedback system Drive: Stepping or direct-current motors

The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.

Our cross roller guide rails are freely interchangeable standard elements. Our guide rails allow the assembly of extremely rigid and precise linear guides without any play. Benefits Able to carry high loads running extremely smooth require little space long serviceable life Mounting instructions: When mounting the guide rails make sure the bearing surfaces have been machined in a parallel manner and are to the angle. The tolerances of the bearing and mounting surfaces shall conform to the process tolerances of the guide rails (standard quality). The prestress applied depends on the respective mounting conditions, on the rigidity of the assembled slide structure respectively. We recommend to apply a prestress equivalent to a value between 5 and 20 % of the maximum admissible load. However, the load carrying ability of the overall guide rail structure thus realized will, at any case, be reduced by the prestress applied.

LT Ultra has also implemented the technology of metal-cutting microstructuring in roller lathes. We can offer the production of structures in a grid between 5 and 150 µm in optical quality for provided rollers.Offer up to a length of 2500 mm, a diameter of up to 800 mm and a maximum weight of 2500 kg.

A lever clamping permits a simple, fast and exact adjusting of different working levels, without any efforts to adapt the devices. The swivel unit is available for the rotary tables RT2A075, RT2A100, RT2A150 und RT2A200. Field of applications: Assembly technologies, measuring and testing equipments, laser writing, welding, cutting, as well as special mechanical engineering. Features (RT2A100, RT2A200): Individually adjustable swiveling range from -5° to +95°. Fixed stop iin the 0° and 90°. Other positions possible by customer request. Clamp and locking effect through laterally installed, adjustable clamping lever. On one side appropriate scaling in 1° steps. Fixing of the swivel unit through four countersinking holes in the base plate.

Franke bearing asseblies type LVG are bearing assemblies made of aluminum, designed as double row angular contact roller bearings with integrated bearing elements. LVG bearing assemblies are suitable for the highest load ratings. They convince by high rigidity, low rotational resistance and low weight. Designed as roller bearings, they can support high loads from all directions and are insensitive to shocks and vibrations. Franke LVG are sealed on both sides and are set with preload. By using aluminum, Franke beaing assemblies type LVG are 60% lighter than comparable steel bearings.

Light duty castors and wheels are mainly used for less demanding applications requiring a load capacity of up to 280 kg. They are designed for speeds of up to 3 km/h and therefore more frequently used indoors.Typical applications of light duty castors are medical equipment, display bases or equipment for large-scale catering establishments.

Blickle’s synthetic castors have a modern and clear design and feature high-quality surfaces. They are used in a wide range of applications, including medical equipment, transport systems, kitchen equipment and designer furniture. The smooth surfaces of synthetic castors make them easy to clean, allowing them to meet demanding cleanliness and hygiene requirements. .

Rubber wheels and castors can be used for a wide range of applications. The elastic tread provides a high level of floor surface preservation and makes the equipment quiet when in motion. This makes it possible to achieve an excellent level of operational comfort, even on difficult floor surfaces.

The castors and wheels which are frequently used for medium loads are often capable of transporting heavy loads, albeit generally at the cost of operational comfort. The significant weight involved also tends to have a detrimental effect on the floor. Blickle’s premium rubber wheels and castors are designed for specific applications. In addition to ensuring good floor preservation, they are also easy to manoeuvre and provide a high level of operational comfort in their class.

Swivel and fixed castors with pneumatic rubber tyres are used for maximum floor surface preservation. The pneumatic rubber tyres are available with zig-zag or ribbed profile and can be used indoors and outdoors.

Super-elastic solid rubber tyres are always used for heavy duty applications when transporting heavy loads across challenging surfaces. They are frequently used for agricultural equipment, transport units for large components, forklift trucks and cleaning and sweeping machines. Super-elastic solid rubber tyres are multi-component tyres which are resistant to a wide range of aggressive substances. They provide a high level of operational comfort, low noise levels and good floor preservation.

Thermoplastic injection-moulded polyurethane (TPU) based on polyesterpolyol, diisocyanate and glycol. This is vibration-absorbing, non-marking, non-staining and highly abrasion-resistant, while also providing good floor preservation. The tread is also resistant to a wide range of aggressive substances, although it has only limited resistance to hot water or steam.