Results for
LUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying aqueous and fatty food from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motorsareavailable , which can be combined with the Pump tubeat any time. This gives you flexibility at all times, thus saving important resources. * Horizontal connection on the bottom run of the container * Pump tube equipped with Lutz original hand wheel * also for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents Features & Advantages * Optionally with electric or compressed air drive * Low loss of the medium when disconnected * Food grade connections * Low space requirement * Approved according to FDA and regulation (EG) 1935/2004
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V HD-D Industrywith circulation/flushing connection for three-phase motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. * Version with circulation/flushing connection with internal thread 3/8". * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use * Approved according to ATEX Directive 2014/34/EU, Category 1/2
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * service-friendly and easy to dismantle * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The eccentric worm-drive pump B70V-SR (with reduction gear) in PURE design is suitable for pumping water-like to highly viscous media with and without fibres or solids. Depending on the application, various electric and compressed air motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Also available in special immersion depths * Examples of media: viscous cosmetic products, foodstuffs, etc. * Uniform volume flow * Gentle, low-pulsation product conveyance * Low wear and tear * Ideal for mobile use * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life approx. 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic switch-off in case of overload * sophisticated quick lock * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic switch-off in case of overload * sophisticated quick lock * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V HD-SR Industrywith circulation/flushing connection for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The B70V HD-SR Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. * Version with circulation/flushing connection with internal thread 3/8". * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use * Approved according to ATEX Directive 2014/34/EU, Category 1/2
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube HD-E Industryfor oils, paints and disposal liquids is available in the food version (Pure) The HD-E Eccentric screw pump in the industrial version transfers the advantages of the Drum pump low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the pumping element - all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources. * also available in special immersion depths * Pump tube equipped with Lutz original hand wheel * Media examples: Oils, waste oils, disposal liquids, paints. * Smooth running * Uniform volume flow * Gentle, low-pulsation product conveying * Low wear * Easily detachable outer tube
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Eccentric screw pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, you can choose from a range of different rotary current motors, which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * also available in special immersion depths * Media examples: viscous cosmetic products, food and etc. Features & Advantages * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. The set is supplied without battery and charger * Replaceable, powerful battery with Li-Ion * Battery life approx. 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteLUTZ PUMPEN GMBH
Germany
Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Vario Pump Set is suitable for thin-bodied acids, alkalis and chemicals. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * infinitely variable speed controller for transferring and filling small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life. * Service-friendly and easy to dismantle The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The horizontal Pump tube is suitable for emptying highly aggressive, thin-bodied, flammable and explosive liquids from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. * Horizontal connection at the bottom run of the container * Pump tube equipped with Lutz original hand wheel * Suitable for emptying alternative fuels, oils, flammable liquids * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Explosion-proof versions for applications in hazardous areas (Zone 1 and 2) * Easy to dismantle * Low space requirement
Request for a quoteLUTZ PUMPEN GMBH
Germany
for liquid lubricants and cleaning agents The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LUTZ PUMPEN GMBH
Germany
The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Depending on the application, various motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Horizontal connection at the bottom of the container * Also for alcoholic foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Food-safe connections * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2 * Approved according to FDA and Regulation (EC) 1935/2004 The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set B2 Battery is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small pads such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. . Exchangeable, powerful battery with Li-Ions . Battery life 35 min at maximum speed . 1 battery charge empties approx. 12 x 200 litre containers . BLDC Motor with high efficiency up to 70% . infinitely variable . high battery life . automatic shutdown in case of overload . sophisticated quick release * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Pump Set B2 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. *Optional impeller or rotor shape * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources. * Infinitely variable speed controller for the transfer and filling of small quantities Features & Advantages * Sealless design (DL) conditionally safe to run dry * infinitely variable * powerful Motor with improved service life * Service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.
Request for a quoteOPSYTEC DR. GRÖBEL GMBH
Germany
Xenon excimer lamps enable new, resource-saving and more efficient production possibilities. They are used in the field of surface treatment for matting, cleaning, surface activation or to save photoinitiators. For this purpose, the narrow-band spectrum around 172 nm is usually used to irradiate under inert gas conditions. Then the high photon energy is sufficient to split almost all organic compounds. The measurement of 172 nm (VUV) is an important component for process control and optimization. With the tinyTracker 172 we offer a calibrated band radiometer which is suitable for use in an inert atmosphere. The tinyTracker 172 is absolutely calibrated and measures the irradiance and irradiation dose of xenon excimer lamps directly at 172 nm. Due to its particularly flat design, the tinyTracker172 can be guided through the irradiation channels of UV belt dryers and other industrial equipment.
Request for a quoteHERBERT WALDMANN GMBH & CO. KG
Germany
LUMATRIS brings the latest LED technology to medium- and large-sized machines. Waldmann knows that in mechanical engineering competitive ability equals the sum of innovative components and functions. LUMATRIS transforms the spot light characteristics of LEDs economically into an extremely homogeneous area light. • Maintenance-free LED technology • Particularly resource-saving variants with Eco mode • Wide-beam light characteristics • Variants with Light Forming Technology for optimum light deflection and glare-free lighting • Robust aluminium housing with solid safety glass screen • Die-cast side parts • High degree of protection • Chemically resistant to many media such as oils or cooling lubricants • Ideal for high mechanical and thermal stress • Direct connection to machine voltage • Lateral or rear connection by means of M12 plug connector
Request for a quoteAERO-LIFT VAKUUMTECHNIK GMBH
Germany
The CLAD-LIFT 1000 is designed to handle glass, windows, panels, doors or other elements up to 1000 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece 180 ° vertically and 180 ° horizontally via the hydraulic system. The front driven Clad-Lift 1000 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. Raise the bar for heavy loads The CLAD-LIFT 1000 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources. Sophisticated protection against overloading for maximum safety: If 90% of the maximum...
Request for a quoteAERO-LIFT VAKUUMTECHNIK GMBH
Germany
The CLAD-LIFT 785 is designed to handle glass, windows, panels, doors or other elements up to 785 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece 180 ° vertically and 180 ° horizontally via the hydraulic system. The front driven Clad-Lift 785 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. CLAD-LIFT for heavy loads The CLAD-LIFT 785 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources. Sophisticated protection against overloading for maximum safety: If 90% of the maximum load is...
Request for a quoteAERO-LIFT VAKUUMTECHNIK GMBH
Germany
The CLAD-LIFT 600 is designed to handle glass, windows, panels, doors or other elements up to 600 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal. The front driven CLAD-LIFT 600 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem. Flexible like the 350 - more powerful drive The CLAD-LIFT 600 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources. Sophisticated protection against overloading for maximum safety: If 90% of the maximum load is...
Request for a quoteAERO-LIFT VAKUUMTECHNIK GMBH
Germany
One person can lift windows and glass doors up to 350 with the CLAD-LIFT 350. Functionality and characteristics The CLAD-LIFT 350 is designed to handle glass, windows, panels, doors or other elements up to 350 kg in weight with great efficiency. This vacuum lifting device with hydraulic telescopic beam enables the operator to rotate the workpiece by 360 ° vertical and 180 ° horizontal. The front driven Clad-Lift 350 with its polyurethane foam filled wheels is extremly manoeuvrable, not only on levelled ground, but also off-terrain. The powerful, electrohydraulic system has a stepless speed control of all functions. With the slim design of the device, passing doors is never a problem . The CLAD-LIFT 350 consists of the following modules: Powerful front-wheel drive ensures best handling, both indoors and outdoors. Both front drive wheels are equipped with electronic brakes. The vacuum pump with "Power Save", ensures saving battery resources . Sophisticated...
Request for a quoteResults for
Resource-saving - Import exportNumber of results
32 ProductsCompany type