Measuring technology - Import export

We would be happy to check the dimensional accuracy of your components in-house. LT Ultra-Precision Technology has a large number of high-precision measuring devices in precisely air-conditioned measuring laboratories for testing its own products, on which we also carry out contract measurements.The following measurement technology is available:High-precision coordinate measuring technology.Interferometric shape measurement technology for plane surfaces, spheres and aspheres.Roughness measurement technology via white light interferometer (WLI) or atomic force microscope (AFM).Reflections- and Transmissionsmessung.Ellipsometrie.Polarimetrie

We offer test stands and measurement technology and the complete software package: LabVIEW, SPS S7, Wonderware, C Sharp LabVIEW, PLC S7, Wonderware, C Sharp Today, measurement technology is no longer conceivable without high-performance software that is tailored precisely to the application - this applies both to measurement recording and the evaluation of the recorded data, right up to the control of complete systems. For this reason, EP-E has consistently developed into a software house specializing in measurement technology over the last few years. More than half of our development department is now working exclusively in this field. We are therefore one of the few companies in Germany that can supply you with test and inspection systems where hardware and software are perfectly matched. But our team is also happy to develop suitable solutions for test stands from other manufacturers.

We offer you a comprehensive service portfolio around your measurement technology: whether we support you in the complete project or only in sub-areas, is entirely up to you. Starting with the project planning and construction, over the commissioning and support with the CE certification up to the maintenance of your test stand - our offer extends.

The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In measurement and control technology digital indicators are used to constitute measured values or process variables.

In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters. The 9206 USB sensor interface can satisfy this requirement admirably, thanks to its „plug & measure“ design. The USB connection means installation could not be simpler. Typical applications: —Mobile test measurements via laptop —Laboratory test set-ups —Instrumentation and control —Diagnostic measurements in the chemical industry —PC-based recording of expansion figures in bio engineering The USB sensor interface takes its supply from the connected PC via the USB port, and uses it to generate the power supply for the sensors. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer.

We manufacture a large number of standard products as well as customer-specific special parts with optical surface qualities as contract manufacturing. You are welcome to get an overview in the category metal optics.You can also download all metal optics directly from our general overview or find them in our download area .In addition to such components with an optical function, we also manufacture precision parts for which a high geometric accuracy is in the foreground, such as air bearing components or micro-milled parts. With an extensive inventory of ultra-precision machines and the corresponding measuring technology, we manufacture with accuracies down to the sub-micrometer range and with roughness up to approx. 1 nm [Ra]. LT Ultra serves both single and series production. We look forward to your inquiry.

Microwave measurement device, Continuous InLine measurement of dry matter or consistency Description At the microwave measurement technology an electromagnetic wave with very low energy is generated. This signal is coupled via an antenna into the product (Cellulose, Cheese, Milk, Curd, etc.). Depending on the dielectric properties of the product the signal propagates in the product. After the signal has passed the product a second antenna receives the signal (Transmission). Amplitude and phase shift of the received signal are an expression for the consistency, water content or dry matter of the product. The microwave measurement is very stable and it has a quick response to product changes.

This force measurement chain was developed for applications where a low cost solution is more important than achieving high levels of accuracy. The sensors strain gauge technology allows the measurement of static and dynamic forces. The load cell is also designed for applications that provide only little space due to its compact design. These properties, together with the sensors dust protection, make the measuring chain suitable for a wide range of applications, such as Industrial manufacture Manufacture of customized machinery Geological investigations Motor vehicle engineering Commercial agriculture Bridge building The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor. The domed form, however, minimizes the effect of a force that is not exactly axial.

NIR– Laboratory measurement device for solid and pasty products Description The particuLAB is an NIR (Near Infrared) laboratory measurement device with state of the art technology. Which can measure all organic components in solid, pasty and powdery products. With one measurement you can measure simultaneously all valuable components like fat, protein, collagen, water, etc. Through the simple sample preparation, the light and compact construction, is the particuLAB suitable for laboratory measurements and AT– Line measurements. With the easy to use calibration function, our customer can take spectra's at the device and read the internal stored spectra with the calibration software. Through this function, our customer can expand independent or with our help an existing calibrations or create new calibrations.

The incremental digital displays are used in combination with our high-precision displacement sensors 8738. The digital technology of these measuring systems satisfies high demands for precision and long service life, as is required more and more nowadays — in measuring laboratories — in production — in testing laboratories — in workshops and many other areas. Typical uses: —Automatic assembly machines —Semiconductor industry —Keyboard tests —Robot controllers —Testing of shafts and planes —Measurement of differential displacement With its phenomenal resolution of 0.1 µm and the high response frequency of 20 MHz, the 9140 is a powerful display unit with a compact design. The comparator function integrated as standard allows for direct evaluation of measurements almost in real-time; these can be processed further by a higher-level controller. A rather more comprehensive acquisition method is also integrated into the system.

Model number 8201 precision pressure sensors are robust, economical, and are available in standard measuring ranges. Their good technical specification and high reliability make them optimum for measuring pressure in all fields of machine construction, process technology, as well as in measurement and control technology. The pressure transducers are easy to handle and immune to shock loads and vibrations as they are designed without moving parts. All pressure transducers without an internal amplifier have a standardized output signal of 1.0 mV/V. This enables the user to change a transducer in a measuring chain as liked without following readjustment of the electronic. Customized designs are available on request. Aeras of application are: —Hydraulic or pneumatic machines —Mechanical engineering —Plant control and monitoring The measuring element of the precision pressure transducer consists of a diaphragm.

NIR– Laboratory measurement device, for liquids of different consistencies Description The HK12 is an NIR (Near Infrared) laboratory measurement device with state of the art technology. Which can measure all organic components in liquids of different consistencies. With only one measurement you can measure simultaneously all valuable components like fat, protein, lactose, water, etc. Through the simple sample preparation, the light and compact construction of the HK12, it is ideally suitable for laboratory operation. With the easy to use calibration function, our customer can take spectra's at the device and read the internal stored spectra with the calibration software. Due to this function, our customers can expand independent or with our help an existing calibrations or create new calibrations.

NIR– Laboratory measurement device, For solid and pasty products Description The HK11 is an Stand– Alone NIR (Near Infrared) laboratory measurement device with state of the art technology. Which can measure one organic component like fat, protein, water, collagen, etc. in solid and pasty products. Through the simple sample preparation, the light and compact construction, is the HK11 suitable for the use in the laboratory or as AT– Line measurement device. With the easy to use calibration function, our customer can take spectra's at the device and read the internal stored spectra with the calibration software. Due to this function, our customers can expand independent or with our help an existing calibrations or create new calibrations.

NIR– InLine measurement device, For continues measurement of organic components Description The HK4 is an NIR (Near Infrared) In Line measurement device with state of the art technology. Which can measure all organic components in solids like meat and in liquids with different viscosities like milk, oil. The HK4 can be installed at pipelines, tanks / vessels, cutters, mincer, etc.. With only one measurement you can measure simultaneously valuable components like fat, protein, lactose, solids content, etc. for the dairy industry and fat, protein, collagen, water, etc. for the meat industry. Through the modular construction (Sensor and evaluation unit are separate), the sensorcalibrations.

NIR LED– Technology, Continuous InLine measurement of two organic components Description The HK3 Series are NIR (Near Infrared) LED InLine measurement devices with state–of–the–art technology. The devices are used on conveyor belt, in pipelines (connection via flow through measuring cell or flange) and in tanks / vessel. Through the modular construction (Sensor and evaluation unit are separate), the sensor can be installed at a different accessible places and the evaluation unit can be installed at a well accessible place. This ensure the easy handling. The modular construction makes the operation of the HK3– Series very easy.

A lever clamping permits a simple, fast and exact adjusting of different working levels, without any efforts to adapt the devices. The swivel unit is available for the rotary tables RT2A075, RT2A100, RT2A150 und RT2A200. Field of applications: Assembly technologies, measuring and testing equipments, laser writing, welding, cutting, as well as special mechanical engineering. Features (RT2A100, RT2A200): Individually adjustable swiveling range from -5° to +95°. Fixed stop iin the 0° and 90°. Other positions possible by customer request. Clamp and locking effect through laterally installed, adjustable clamping lever. On one side appropriate scaling in 1° steps. Fixing of the swivel unit through four countersinking holes in the base plate.

We develop and produce pressure measuring ceramic and stainless steel cells and pressure transmitters with tried-and-tested thick-film technology to measure the pressure in gaseous and liquid media.

Simultaneous speed / torque display universally applicable sufficient for many measuring tasks 11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm Very short Broad input voltage range Current output and voltage output Measurement accuracy: ≤ 0,5% of full scale Torque ranges from 0,5 to 1000 Nm Contactless transfer of measurement signal Proven strain gage technology Integrated signal amplifier Single power supply Multipurpose use Simultaneous speed/torque indication 4-segment display with sign Peak mode (clockwise only) Indication area on LCD display 30 x 11 mm Speed indication updated 1x sample/second Torque updated 1,000 samples/second

The Suction Lances have the following Features: - G1 1/2" bis G2", screw cap, plug in flange, others on request - PVC- and Silicone-cable - ABS-enclosure - upto 3 NO, NC, 2 change over - overall length: upto 1.500 mm - Temperature range 0°C to +60°C - upto 0bar - upto IP64 - Options: non return valve