Results for
SCHWEIZER GMBH & CO. KG
Germany
Piston valves for petrol or oil lines. The valves prevent the line from draining after the pump has been switched off. This type of valve is only used in applications above 5 bar. The opening pressure is set to the corresponding counter pressure.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Shut off valves suitable for water, petrol and oil application. Very compact construction made of steel or aluminum
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Flap valves for petrol or oil lines. The valves prevent the line from draining after the pump has been switched off
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
We manufacture stainless steel branch pipes as well as stainless steel T-pieces with the following characteristics: 30°, 45°, 90° degrees (standard) material-no. AISI 304 / 304L at request also in aluminium at request also forming gas welded
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Brake force control valve for stepless regulation of the brake pressure.
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
Along with highly wear-resistant stainless steel pipe bends of type HVA NIRO® we offer suitably highly wear-resistant branch pipes. They are available in in all sizes, diameters and angle degrees.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BÜRKLE GMBH
Germany
The spigot Compact for canisters and barrels captivates everyone through its compact build, which makes the valve on the canister ideal for use in refrigerators and on racks, etc. The short discharge does not protrude out over the lower edge of the container, which makes the valve a perfect choice even when space is very limited. The discharge's specially optimised design creates an even stream of liquid with no splashing or spattering. The spigot features easy motion and a tight seal. It is screwed on with a connecting cap nut. This guarantees a vertical position of the valve and makes it possible to adjust the valve later on. The Compact spigot fits all containers with G 3/4" connecting threads. PP, PE and PTFE are materials that offer outstanding chemical resistance to acids and alkalis. The Compact spigot is the ideal addition to the compact jerrycans – for perfect storage and filling when space is at a premium!
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 202 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. Good cleanability The solenoid can be replaced without removing the valve body from the piping Hermetic separation between medium and actuator Connection types: Solvent cement socket \ Threaded connection Connection standards: DIN \ ISO Body materials: PVC-U, grey \ PVDF Conformities: EAC \ UL
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 428 butterfly valve has a low maintenance motorized quarter turn actuator. A manual override and an optical position indicator are integrated as standard. — Low weight — ATEX version available as an option — Various seal materials available
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 0326 directly controlled 3/2-way pilot solenoid valve is designed for mounting to a compact aluminium rail as a valve battery for mounting in control cabinets or as a valve manifold near the pneumatic components to be controlled. The body is made of plastic. The coil is plastic encapsulated. -Robust design -Coil easy to replace -Option: integrated LED (M12 version) -Modular battery mounting
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The pressure relief valves GEMÜ N085 and N185 protect the plant and the piping system against gauge pressure and reduces pressure peaks. The third pipe spigot enables the valve to be installed in the main pipe. If the pressure increases, the spring is raised and the valve opens. The pressure is reduced to the preset value and can escape via the third pipe spigot into an adjacent pipe. If the pressure falls, the spring force presses the diaphragm in the direction of the seal seat and it is closed. The spring force can be adjusted as required using a set screw. - Valve adjustments can also be made under working pressure. - The optimization of piston, springs and control face ensures good control characteristics - The actuator is hermetically separated from the medium
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ N082, N182 and N782 pressure reducers ensure that a constant outlet pressure is maintained in process plant utilizing the pressure differential.If the pressure rises on the outlet side, the spring force is lower and the valve closes as the spring is raised. The pressure is reduced until the spring force and the outlet pressure are the same. If the pressure falls, the valve opens as the spring force presses against the diaphragm surface via the control aperture. The outlet pressure can be read off a diaphragm-protected pressure gauge (not available for N782) and the spring force adjusted using a set screw as required. - The working pressure can be very easily adjusted using a set screw and secured with the integrated lock nut. If required, the setting that has been made can be lead sealed - The flow-efficient design of the valve body ensures good flow rate values - Control errors are kept to a minimum due to the large control face and the spiral spring
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 52 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. —Good cleanability —The solenoid can be replaced without removing the valve body from the pipeline —Hermetic separation between medium and operator
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
Fittings Our manufacturing site in Switzerland produces over 100 different types of fitting under cleanroom conditions in compliance with DIN 16901-140. The fitting bodies are made of PFA, while the union nuts are made of PFA, PVDF or CPFA. We stock all the connections available on the market too. Emmen cleanroom plant GEMÜ has be producing valves and fittings at its new cleanroom plant in Emmen (Canton of Lucerne, Switzerland) since September 2012. A state-of-the-art manufacturing and assembly facility was built here when, thanks to commercial success, the capacity of our site in Rotkreuz could no longer keep up with demand. When planning and developing the facility, designers focused on creating a contemporary quality management system that is fit for the future. The result is that product and production quality are ensured, for example, by using specific inspected raw materials and through audits carried out by customers and official bodies.
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
The VersaMeter™ is designed to fit direction into a pipeline assembly and can provide either local or remote display options. The VersaMeter™ represents a full range of precision flow measurement instruments and accessories utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The VersaMeter™ meets current NFPA86 guidelines for safe usage in the thermal processing industry. In addition, every VersaMeter™ comes complete with a 10point calibration curve traceable to a NIST transfer standard. The meters can also be field calibrated to meet CQI-9, ISO, NADCAP and QS quality audit systems. The VersaMeter™ product line comes in many sizes and is designed to fit directly into equipment piping. The VersaMeter™valve assemblies fit standard pipe fittings to better integrate into...
Request for a quoteSTAIGER
Germany
• Orifice (DN): 0.6 mm • Pressure range: 0.5 – 10 bar • Operating voltage: 6 VDC • Power consumption: max. 1.4 W • Degree of protection: IP65 Staiger pilot valves are used in order to operate non-contact water taps in energy-saving mode. These valves fitted with microbatteries operate only after being actuated by an electrical impulse. This impulse is triggered by moving your hand in front of the sensor, which triggers the extremely robust pilot valve. After water has been dispensed, the valve returns to its inoperative position. This valve is characterized by robustness, durability and small size. Benefit The low power consumption by the impulse control is ideally suited for use in electronically controlled taps with battery operation. The valve is constructed entirely of water-approved materials and is certified according to KTW, W270, WRAS, ACS and NSF 61.
Request for a quoteMÜLLER CO-AX GMBH
Germany
The green line™ series has been specially developed as an energy efficient series of solenoid valves. For this reason directlycontrolled standard valves from müller coax have been paired with completely new, patented control electronics.
Request for a quoteMÜLLER CO-AX GMBH
Germany
Tested valves are typetested solenoid valves with two or three connections and two switching positions. These are safety shutoff valves in the basic closed position. The type examination ensures that, in the event of a drop in voltage, all valves seal closed within one second and thus reliably shut off the fuel supply (safety valve).
Request for a quoteResults for
Valves and fittings - Import exportNumber of results
52 ProductsCompany type