Pump design - Import export

The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.‌

The Eccentric screw pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, you can choose from a range of different rotary current motors, which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * also available in special immersion depths * Media examples: viscous cosmetic products, food and etc. Features & Advantages * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

Dry sump oil pumps in modular design with 1 to 4 chambers. Delivery rates on the pressure side are a maximum of 29 liters per minute. The suction side maximum 24 liters per minute. Suitable for engines with a capacity of 2 to 8 liters

Pump-it® canister pumps are designed for quickly and cleanly emptying canisters and small barrels up to 60 l. The hand pump is used to create excess pressure that forces the liquid out of the canister. Pump-it® is suitable for weak acids, alkalis and petrochemicals.

Vacuum Pump VP-TF Design Cap. (m³/h) Vacuum (mbar) oilless, 24V 0,65 ... 8 -800 ... -850

Vacuum Pump VP-0 Design Cap. (m³/h) Vacuum (mbar) Power (kW) oil-lubricated 10 ... 250 -980 0,37 ... 7,5

Vacuum Pump VP-T Design Cap. (m³/h) Vacuum (mbar) Power (kW) oilless 4 ... 140 -850 ... -900 0,18 ... 5,5

The ExoFlex™ line of exothermic gas generators is designed to generate lean or rich exothermic gas. The generator includes automatic output turndown to 20% of the generator capacity with little loss of efficiency using the patented, maintenance-free ExoInjector™ gas mixing system. Thanks to a patented fuel injection technology that utilizes electronic flow measurement and precise ratio control, ExoFlex™ consistently provides the ideal mixture for high quality gas production. Another innovative design feature is the trim control input with programmable control range for precise generator control, which also eliminates the need for extra meters or valves. The ExoInjector™ easily replaces existing carburetor/pump designs for a significant reduction in process costs.

Liquid soap dispenser in stainless steel (AISI 316L) for mounting behind fixed mirror. Onehand operated and nondrip soap pump. Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Accessible for refilling through spring stop pin and by removing from below. Delivery includes fixing material, selfadhesive information label „Soap“ and first fill with soap. Dimensions 91 x 259(221) x 98 mm

Sensor liquid soap dispenser in stainless steel (AISI 316L) for surface mounting. Allstainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. With touchfree operated and nondrip soap pump. Designed for standard 950 ml disposable bottles of liquid soap or hand lotion. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material, batteries and first fill with soap. Dimensions 86 x 298 x 121 mm

Liquid soap dispenser in stainless steel (AISI 316L) for surface mounting. Allstainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Onehand operated and nondrip soap pump. Designed for standard 950 ml disposable bottles of liquid soap or hand lotion. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material and first fill with soap. Dimensions 80 x 298 x 120 mm

Liquid soap dispenser in stainless steel (AISI 316L) for surface mounting. Allstainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Onehand operated and nondrip soap pump. Designed for standard 500 ml bottles of liquid soap or hand lotion. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material and first fill with soap. Dimensions 70 x 270 x 110 mm

The AquaZero cooling machines, equipped with a water tank and centrifugal pump,are designed for an open cooling circuit system. Excellent reliability, durability, compact design. Example: Compact cooling water cooler 15.0 kW: Cold water supply temperature: -5 ° C * to + 15 ° C Ambient air temperature: + 5 ° C to + 42 ° C Cooling capacity: 15.00 kW Refrigerant: R407C Power supply: 400 volts, 3 phases, 50 Hertz Connection cable: 4 meters with plug

The AquaZero cooling machines, equipped with a water tank and centrifugal pump, are designed for an open cooling circuit system. Excellent reliability, durability, compact design. Example: Our AquaZero 4.0 kW cooling unit impresses with its high performance, temperature controls environmentally friendly and works efficiently. Choose this water chiller if you want to control temperatures in your production rooms, lounges or storage rooms to the degree. The water-cooled cooling devices from AquaZero are made in Germany and can be connected to any existing pipe system. Equipped with a 28 liter water tank and centrifugal pump, you can start with the desired temperature control of your premises in the company immediately after installation.