Pump design - Import export

without shaft seal Robust and casted casing CARTRIDGE UNIT for fast and easy maintenance Temperature up to 120°C (higher temperatures are possible) Close coupled, single stage, back-pullout-design Universal DIN/ANSI connection Suction port DN65 Discharge port DN50

The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.‌

The Eccentric screw pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, you can choose from a range of different rotary current motors, which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * also available in special immersion depths * Media examples: viscous cosmetic products, food and etc. Features & Advantages * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C .

Dry sump oil pumps in modular design with 1 to 4 chambers. Delivery rates on the pressure side are a maximum of 29 liters per minute. The suction side maximum 24 liters per minute. Suitable for engines with a capacity of 2 to 8 liters

Pump-it® canister pumps are designed for quickly and cleanly emptying canisters and small barrels up to 60 l. The hand pump is used to create excess pressure that forces the liquid out of the canister. Pump-it® is suitable for weak acids, alkalis and petrochemicals.

dispenser pump, easy handling, ergonomic design

Industrial pumps play a crucial role in a variety of industrial applications and are essential components for the efficient functioning of processes in various industries. At AIS Hensch Automation-Industry-Solution we offer a wide range of high quality industrial pumps designed for reliability, efficiency and performance. Versatility and Adaptability: Our range of industrial pumps includes a variety of types including centrifugal pumps, centrifugal pumps, metering pumps, screw pumps and more. These pumps are suitable for a wide range of applications, be it in the chemical industry, mining, food processing, water treatment or other industries. High-quality construction and materials: Our industrial pumps are made from robust materials and manufactured to the highest quality standards. They feature a durable construction that ensures reliable performance even under demanding operating conditions.

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal. Upon request a second mechanical seal is available to allow for dry-running (-GD). This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. The SBA pumps are equipped with the user-friendly (SAE) flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 2200 l/min Delivery head: up to 62 m Please contact us for delivery quantity.

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures.Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

Melt pump specially designed for use in the production of medical tubing made of TPE, PE or PA. The melt pump is installed downstream of the extruder in the extrusion process for pressure build-up and constant delivery of the melt to the die. It is particularly important for medical tubing that the wall thickness and quality is absolutely constant and uniform.

Transformers with forced oil cooling systems require reliable, glandless transformer oil pumps. We offer a large range of such pumps, from which customers can choose a type that suits their specific requirements and ensures optimum operating conditions. Our oil circulation pumps are of simple, straightforward design and robust construction. Due to their compact size, the pumps can be easily integrated into the oil circuit. Four pump designs are available for different applications: Power Transformer Applications Inline and angle-type pumps with radial impellers and inline pumps with propeller-type impellers. Traction Transformer Applications Pumps with radial impellers for traction transformers in rail-mounted vehicles.

Vertical End Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with double mechanical seal. This pump series is designed for vertical installations next to a tank and for pumping highly air entrained coolant and cutting oils, as they occur in high speed grinding applications. The SBG pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G ¼. Volumetric delivery: up to 2250 l/min Delivery head: up to 62 m Please contact us for delivery quantity

Pneumatic diaphgragm pump with ratio 1:1. From 3/8" upt to 2", our standard pumps are specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts.

Pneumatic piston pump with ratios from 1:2 up to 1:80. The pumps are specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts.

Pneumatic piston pump developed by Jerko. The pump is specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts. The necessary pressure to supply the spray equipment is generated by a piston pump developed by Jerko with a transmission ratio of 1:3.

Vacuum Pump VP-TS Design Cap. (m³/h) Vacuum (mbar) Power (kW) oilless, silenced 16 ... 50 -850 ... -850 0,55 ... 1,25

Vacuum Pump VP-0 Design Cap. (m³/h) Vacuum (mbar) Power (kW) oil-lubricated 10 ... 250 -980 0,37 ... 7,5

Vacuum Pump VP-T Design Cap. (m³/h) Vacuum (mbar) Power (kW) oilless 4 ... 140 -850 ... -900 0,18 ... 5,5

To ensure that your anchorage devices are securely installed in a concrete surface or masonry, the bore holes should be carefully cleaned prior to using special adhesive. This dust pump is designed to quickly remove any dust or residual particles that might cause problems from the bore holes. High capacity Air chamber length: 42 cm

Filltech's most advanced pumping technology: High-end CO 2/N 2O pump designed for automatic redundancy and fail-over Highlights Intelligent interoperability with any Filltech filling station Optimized energy consumption Complete plug & Play system ready for instant connection Safe operation through intelligent monitoring: pressure, temperature, leakage Low noise emission Application ready: filling, dozing, transfer, supply Joint pumps for flow-rates up to 6 tons Remote operations: Monitoring, remote control, power control Technical Data Capacity: 400 - 1500 kg/h, 6-25 lpm, 1.7 -6.6 gpm Power supply: 3 x 400V / 50 Hz, opt 120 / 208V, opt. 277 / 480V/60Hz, 3-phase Power consumption: 1.5 to + 4 kW/h (dep. on pump size) Dimensions (LxWxH): 900 x 900 x 1670 mm / 35 x 35 x 66 in. Pump Triplex plunger pump NP 25/50 – 25/70 Motor: Belt drive Construction characteristics CO 2 supply: liquid from tank system Ring- or stub lines Automatic start cycle Pressure supply needed for valve: 8 b

The ExoFlex™ line of exothermic gas generators is designed to generate lean or rich exothermic gas. The generator includes automatic output turndown to 20% of the generator capacity with little loss of efficiency using the patented, maintenance-free ExoInjector™ gas mixing system. Thanks to a patented fuel injection technology that utilizes electronic flow measurement and precise ratio control, ExoFlex™ consistently provides the ideal mixture for high quality gas production. Another innovative design feature is the trim control input with programmable control range for precise generator control, which also eliminates the need for extra meters or valves. The ExoInjector™ easily replaces existing carburetor/pump designs for a significant reduction in process costs.

DESCRIPTION: High stability on high capacity. Can handle multiple ointment viscosity and types Type of metal used: S.S 316 / 304 Certifications: ISO 9001:2015, OHSAS 18001:2007, ISO 50001:2011, ISO 45001:2018 SPECIFICATION: Heating and cooling system products like (Ointments, Creams, Ketchup, mayonnaise …etc ). High quality of Homogenization Vacuum and pressure atmospheric system Product recirculation system equipped with European pumps and valves for a better performance Sight glass Viewing ports Double jacket Compact design Homogenizer with pump functionality. Blades designed to mix and knead. CIP system Steam system Vacuum pump Agitator with high tech anchor design Automatic open and closing system HMI and PLC with SCADA system Available certification up on your request: UL, CE, cGMP, FDA, ASME. Available documents up on your request: I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.

Standard shipbuilding The international requirements for the operational reliability of ships and machines in the shipbuilding and marine sector as well as the general conditions and limitations regarding energy efficiency and the emission of pollutants are constantly increasing. Leistritz has already been meeting these rising requirements for decades. High-quality products and the globally unique range of different types of screw pump designs offer the corresponding sustainability. Cargo application A wide variety of specialized vessels are generally used for the transportation of liquid freight on inland and shipping routes. In order to be able to safely load and unload the freight, these ships must be adapted for the specific storage and transport features.

Liquid soap dispenser in stainless steel (AISI 316L) for mounting behind fixed mirror. Onehand operated and nondrip soap pump. Designed for standard 500 ml or 950 ml disposable bottles of liquid soap or hand lotion. Accessible for refilling through spring stop pin and by removing from below. Delivery includes fixing material, selfadhesive information label „Soap“ and first fill with soap. Dimensions 91 x 259(221) x 98 mm

Sensor liquid soap dispenser in stainless steel (AISI 316L) for surface mounting. Allstainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. With touchfree operated and nondrip soap pump. Designed for standard 950 ml disposable bottles of liquid soap or hand lotion. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material, batteries and first fill with soap. Dimensions 86 x 298 x 121 mm

Liquid soap dispenser in stainless steel (AISI 316L) for surface mounting. Allstainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Onehand operated and nondrip soap pump. Designed for standard 950 ml disposable bottles of liquid soap or hand lotion. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material and first fill with soap. Dimensions 80 x 298 x 120 mm

Liquid soap dispenser in stainless steel (AISI 316L) for surface mounting. Allstainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Onehand operated and nondrip soap pump. Designed for standard 500 ml bottles of liquid soap or hand lotion. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material and first fill with soap. Dimensions 70 x 270 x 110 mm