Material fur - Import export

Producing test specimens for adhesive tape tests is another strength of ours. We manufacture the right test specimen for you from all common materials according to FINAT, AFERA or EN 1939. Plastic test specimens Injection molding test specimens, 150 x 50 mm, 200 x 50 mm With polished class-A finish With structured surface, brushed similar to the A.F.E.R.A standard 4001 Grained with various degrees of surface roughness Various plastics, 200 x 50 mm (for tests according to the FINAT standard)

Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery

Lipp offers a range of metallic materials suitable for use with a wide variety of media, from pure water to problematic and aggressive substances. Those materials range from galvanised/black steel through the combination material VERINOX to high alloy stainless steels. VERINOX stainless steel is a patented, award winning combination material that offers the properties of high quality stainless steels, e.g. 1.4301, 1.4571 or 1.4539, at the cost of galvanised steel and has been in use for more than 20 years. The highest quality and longevity of materials are our top priorities. LIPP MATERIALS AT A GLANCE Stainless steels VERINOX stainless steel Galvanised steels Black steels

Optigrun Drainage Material Perl 2-10 BS is used as a drainage layer beneath extensive and intensive green roofs without water accumulation, for pressure resistant filling of Drainage Boards and as pressure resistant drainage and equalization layer beneath pathways.

The professional filling system FSL-PRO M for companies where to-the-gram weighing and safe packaging even of flammable, foaming or corrosive liquids as well as gentle dosing are of importance. This semi-automatic machine reliably fills your already palletized containers. With a multi-interval scale you also achieve exact weighing results for large measuring ranges. The professional filling system FSL-PRO M is specifically designed for companies filling large quantities. Canisters, pails and drums are equally suitable. For easy handling, the containers are filled and weighed while standing on a pallet. The FSL-PRO M with optional additive tare allows filling of all containers with a uniform small interval from the first to the last container.

Filling system FSL-ECO S is the optimal entry level model for small companies who want to fill high-quality, uncritical and non-flammable liquids. With automatic filling as accurate as 1 gram this practical system lets you save time and money. FSL-ECO S offers particular advantages for companies where filling of liquid products is a firm part but not the main task in their production process. This system is the first step from manual to automatic filling. The semi-automatic system safely and reliably fills all common containers such as canisters, pails, drums or IBCs. Products are handled manually and the automatic filling provides to-the-gram results. You avoid over or underfilling and save valuable time.

The fully automatic filling system optimizes your product quality by to-the-gram weighing, safe packaging even of flammable, foaming or corrosive liquids and through gentle dosing. By means of a multifunctional offset slide you benefit from maximum flexibility for container types and sizes as well as from efficient handling without retrofitting time. The fully automatic machine FSL-EVO S facilitates quick and reliable filling of high quality and sensitive products in different containers. Products can be fully automatically closed and labeled with variable data, if desired. By means of a set up buffer section the filling system largely works autonomously.

Elastomer or plastic sealing elements and also elements made of composite materials (elastomer + plastic or metal) can be compounded with metal detectable additives.

We have been designing and producing UL labels for well-known industrial companies since 1990. The requirements and regulations are very complex and may require a detailed consultation in order to explain the UL-compliant marking and the different application programs. The UL certification of an end product by an OEM (Original Equipment Manufacturer) refers to every single component of the product. A label is such a component whose requirements are regulated in the UL 969 “Standard for Marking & Labeling Systems”.

Material on reels is the alternative to punched platelets and is used in packaging production lines with "inline" punching. The features are identical to the pre-punched seals. We offer various qualities, which can be used for conductive or inductive sealing, e.g. of paste tubes, in an inline process.

If you want to keep your internal processes, your production line or the transport of your goods to their destination running smoothly and efficiently, professional aids such as suitable labels are indispensable. With the right labels, you can check the sequence of goods or see the whereabouts and progress of all goods en route to the point of arrival at any time. With special, continuous or variable markings, every product that has ever left your company can be identified again at any time — with the help of professional labels from Förster.

This Behringer's semi-automatic straight-cutting bandsaws combine the high-cutting output and simple handling which are utilized for economical processing of low piece numbers and one-off cuts. They feature easy handling that are precised in isolating the easy and difficult cuts. These machines are suitable in cutting pipes and all the materials which contain difficult machining properties and they can also provide semi-automatic variants that are recommended for the accurate positioning of a longer cut piece.

Modular equipments for technical training at engines under realistic operating conditions: under load at the engine dynamometer. Applications depending on scope of delivery: torque, power = f(speed), specific consumption sfc = f(speed, power) (gravimetric, selectable automatically). Above tests can be carried out in different ways: conventionally or supported by the test bed's MP Computer or with automatic documentation by directly printing or by PC thermal balance (PC required), real function of a transmission (automatic transmission only with PC), p-V-diagram (PC required). Functions of engine and engine control depending on the load may be demonstrated by using motor analysers, exhaust gas analysers and further measuring instruments. Model-specific error-switch boards are extending the demonstration varieties and are enabling a practical error diagnostics. Comparison of different engines under a certain aspect within one lesson.

Safe, reliable and easy measurements of the exit speed made at the muzzle of firearms. Special design to be integrated into safe test rigs for material testing. Examples of application: Simulation of hailstorm on solar cells, simulation of stone-chipping on coated surfaces or on windscreens, examinations concerning the effect of projectiles on bulletproof vests, bulletproof doors and other security equipment. All models can be equipped with various possibilities to draw up test reports automatically.

S Styrofoam chips must be stored in warehouses and occupy valuable storage areas. FLOETER offers the economically and ecologically correct solution here: Compact air cushion rolls are easy to process, space-saving and recyclable. Wrapped in the right air cushion-type film, your goods are economically and effectively protected. Positive impact for the environment - with air cushions With the innovative air cushion systems from FLOETER, your employees can be sure that they are doing something good for the environment. The FLOETER air cushion systems meet the required legal standards and regulations. In addition, FLOETER is certified according to ISO 9001: 2015 and applies the environmental management system according to DIN EN ISO 14001: 2015.

No packaging material is as flexible as an air cushion wrapper. It perfectly adapts to any shape and is reliable against breakage. So that nothing bad can happen to your goods.

The reliable AirWave standard film with 20µm is perfect e.g. as intermediate wrapper, crosswise wrapping and wrapper to protect your goods during transportation. 100% recyclable material (HDPE) 20μm wall thickness For heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.

With the AirWave ClimaFilm bubble wrap from FLOTER you get a climate-neutral foil without CO2 pollution. 100% climate neutral > 50% recycled material (largely from end-user disposal routes) 420mm wide Foil thickness 20 μm (thinner foils on request) For heavy to medium goods Perforated for easy detachment Made in Germany The AirWave Clima air cushion films are available in different cushion sizes: air cushion chain type 7 (as a replacement for filling paper or styrofoam chips) or air cushion mat type 8 (as a replacement for bubble wrap or polyethylene). Compatible with the AirWave1 and AirWave2 air cushion machines.

You can immediately view the finished material on your computer and post it on your own resources

Adopted stainless steel body and fluorine contained resin valves. The body and spring material of stainless steel (SUS304), and valve of fluorine contained resin ensure excellent performance with various chemicals. Body (SUS304) is electropolished for enhanced corrosion resistance. Plug comes with a dust cap.

Valveless structure suits high viscosity fluids! Various body materials, sizes and end configurations. Braided hose connection types are newly added. Valveless construction drastically saves pressure loss and achieves high flow rate. Suitable for high viscosity fluids (such as grease). Available in various standard body materials, sizes and end configurations to cope with diversified applications and operating situations. See the pages of Seal Material Selection Table at the end of this catalog for the suitability of seal materials to fluids.

Both socket and plug have builtin automatic shutoff valves. Compact size with max. outer dia. 17.5mm. Compact yet operator friendly sleeve design. For small bore piping from temperature control piping to scientific equipment. Body materials in stainless steel or brass, excellent in corrosion resistance. Four types of end configuration enable suitability with a wide range of piping applications.

An asset in any industry...deslagging, desputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a lightweight, minimumsize air tool, Jet Chisel delivers years of troublefree, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient timesaver in shipboard applications, too.

Material on reels is the alternative to punched platelets and is used in packaging production lines with "inline" punching. The features are identical to the pre-punched seals. We offer various qualities, which can be used for conductive or inductive sealing, e.g. of paste tubes, in an inline process.

Coloured label papers, some of which are also available as fluorescent versions, attract great attention. They are ideally suited for promotion and advertising labels as well as hazard labels and self-adhesive warning signs.

PP fims top-coated A special surface treatment ensures good printing results with all standard printing methods, allowing users to produce very attractive glossy labels. The films are especially suitable for labelling of cosmetics products, household cleaners, etc., and for applications requiring weather and chemical resistance.

PE films top-coated Due to its special surface treatment, the surface offers good printing quality in screen, letterpress, and flexo printing. It is possible to produce very attractive glossy labels, which are preferentially used on PE surfaces for recycling reasons. The high flexibility also permits an unproblematic adhesion on curved surfaces.

HERMA offers a wide range of coated papers that enable excellent detail reproduction in print and vivid colours.

Growing demand for recovered paper We are stepping up the use of recycled paper and rapidly expanding our range. One focus is on coated papers, which are of particular interest due to their wide range of applications and the increasing demand from label users. HERMAcoat Recycling (236), for example, consists of 100 percent post-consumer recycling material (PCR), i.e. the waste paper from private households.