Results for
FÖHRENBACH GMBH
Germany
The SK line is equipped with a cross type crank handle and, from size 300 on, with a hand wheel. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.
Request for a quoteFÖHRENBACH GMBH
Germany
Rotary tables with direct drive series RT3 The rotary tables with direct drive are available in different types: RT3A100x100, RT3A100x155, RT3A080x130, RT3A150x100, RT3A150x130, RT3A250x170, RT3A200x060 und RT3G630x225 Rotary tables RT3G630 – high dynamics, high precision, high loading capacity This direct driven rotary table RT3G630 has particularly been developed for machine tool industry and assembly machines. It is characterised by its high precision, highdynamics and its high loading capacity. The rotary table is driven by a permanently excited 3-phase synchronous motor. The rotary plate and the housing are made of gray cast iron.
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
KEIPER synchronizing pulleys can be made of such different materials as aluminum, steel, stainless steel, gray cast iron or plastics. The fact that they can be produced with all pitches and designed according to your specifications and drawings ensures an optimal solution for any application. Our synchronizing pulleys work together optimally with our extensive and complete range of timing belts. Together they are a perfectly matched system for your application. We have a large range of standard pulleys on stock, which can be reworked according to your specifications. Special surface coatings, such as hard coating, anodizing, zinc coating, bronzing, improve the corrosion and wear resistance.
Request for a quoteFÖHRENBACH GMBH
Germany
The RA line descripes a roller beared slide in a special sealed version. The standard type is equipped with a gap seal (approx. 0.5 mm). Special types with felt or nylon scrapers are possible, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
The RH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 mm scale gradation. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
The RK line is equipped with a cross type handle and, from size 300 on, with a hand wheel. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
The RM line The RM line is equipped with a knurled micrometer knob of a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, be delivered with a 0.01 mm scale gradation, too. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
The RE line is equipped with end plates and suits for the attachment of stops, micrometers, cylinders etc. Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
Our slides that run on roller bearings, in single-axis or multi-axis designs, are supplied in the materials grey cast iron and aluminium. The roller bearing slides run in preloaded, hardened and ground Vee-guides. This ensures a smooth, zero-play and extremely precise longitudinal movement - even under high load. Slides which must be designed with T-grooves or higher rigidity can be produced in a reinforced version.
Request for a quoteFÖHRENBACH GMBH
Germany
The SH line is equipped with a hand wheel and a scale ring with a 0.02 mm scale gradation. Sizes 075 up to 400 can, on option, also be furnished with a 0.01 mm scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution.
Request for a quoteFÖHRENBACH GMBH
Germany
The SM line is equipped with a knurled micrometer knob with a 0.02 mm scale gradation. Sizes 075 up to 200 can, on option, also be furnished with a 0.01 scale gradation. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.
Request for a quoteFÖHRENBACH GMBH
Germany
The SS line is equipped with a threaded spindle. From size 75 mm on, all dovetail slides (type SS) are equipped with a digital position readout. Different installation options allow to read the display from different viewing directions. The housing consists of shockproof plastic. The digital display allows to make fast adjustments over the complete measuring path. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine.
Request for a quoteFÖHRENBACH GMBH
Germany
The SE line is equipped with end plates and suits for attachment of stops, micrometers, cylinders etc. The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides.
Request for a quoteFÖHRENBACH GMBH
Germany
The Föhrenbach dovetail guides are made of grey cast iron and of aluminium, but makes of other materials are possible, too. The play is adjusted by means of an adjusting bar. All types are equipped with greasing nipples and greasing grooves. All outside surfaces are ground and the guides milled fine. Also on sale are one axe or multi-axe slide types that run on roller bearings. These are made of grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides. Even under high loads they assure smooth running operation, free from play and guarantee an extremely precise lengthwise motion. As compared to guide rails (dovetail type) they enable exact and easy displacement of parts, free from play.
Request for a quoteBLICKLE RÄDER+ROLLEN GMBH U. CO. KG
Germany
The SVS wheel series is primarily used for heavy duty applications requiring extremely high load capacities of up to 15,000 kg. They are typically used in machine and systems engineering. Their resistance to a wide range of aggressive substances also makes them suitable for use in applications which require resistance to chipping and oil. Despite their exceptional load capacities, only minimal effort is required on smooth surfaces to move transport units with SVS castors. The rugged grey cast iron series is extremely wear-resistant and is also capable of withstanding temperatures of between -25°C and 120°C.
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
easy drive® track timing belts can be made from the complete range of polyurethane and neoprene timing belts: in open lengths, endless welded, for form belts, endless Flex or wide timing belts, in almost any length and width. The directional guiding, with groove in tooth, is either already integrated in the timing belt during production or added later. These timing belts exhibit the same properties as standard timing belts. However, in addition, axial movement is prevented and the zero-play guiding leads to high directional stability. Advantages • Universal application instead of flanged pulleys or special toothed belt guides • Can be used with any tooth shape or belt pitch • Can be combined with any material – steel, aluminium, grey cast-iron or plastics • For polyurethane and also for neoprene timing belts • Maximum directional stability, without lateral play, inaccurate running or drift
Request for a quoteBLICKLE RÄDER+ROLLEN GMBH U. CO. KG
Germany
Blickle cast iron wheels are made from robust grey cast iron with a hardness of 180 to 220 HB. They are extremely wear-resistant and provide very little rolling and swivel resistance. Cast iron wheels are self-lubricating due to the graphite which they contain. However, they should always be sufficiently lubricated using the grease nipple, particularly when using the plain bore version. Due to the relatively high level of floor pressure, care must be taken when using this wheel series on sensitive surfaces. The silver coating on the wheels can change colour at high temperatures, but this does not affect the corrosion protection provided by the coating. Standard cast iron wheels are designed for use in temperatures of up to 120°C.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BLICKLE RÄDER+ROLLEN GMBH U. CO. KG
Germany
Flanged wheels are mainly used on rails to make sure that transport units stay on track. They are made up of a bearing and a wheel centre with a flange. They are used in everything from machine and systems engineering through to pulleys. These environments involve special conditions like heat, contact with oil or chips and electricity. Blickle has five different series of flanged wheels in its product range to meet various requirements. The SPKGSPO, SPK and SPKVS series have a single-sided flange. The DSPK and DSPKGSPO series have a double flange. The flanged wheels are also available in a variety of materials. Compressed cast nylon, steel and grey cast iron series are available. The flanged wheels use either a plain bore or ball bearings. Other bearing types are also available upon request.
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
The dynamic way of sawing The HBE Dynamic series brings many features, which make your production even more profitable: — Solid and durable construction made of vibration damping grey cast iron — Sensitive BEHRINGER downfeed control system — Precise guiding system in portal design — Energy-efficient drive system — Excellent accessibility — Electrically driven chip brush, synchronized with blade speed — Easy operation by intuitive NC control system Different models based on cutting range ( 90° flat / 90° round): — HBE261A Dynamic: 300 x 260 mm / 260 mm — HBE321A Dynamic: 350 x 320 mm / 320 mm — HBE411A Dynamic: 510 x 410 mm / 410 mm — HBE511A Dynamic: 510 x 510 mm / 510 mm
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
To address the most stringent demands in terms of cutting output, high precision, automation and process reliability BEHRINGER HBM series high-performance automatic bandsawing machines offer an impressive package of benefits, guaranteed not only by their vibration-damping structure made of grey cast iron components and the saw frame with its centric flow of forces. The sensitive BEHRINGER feed control also helps protect the saw blade, ensuring even greater economy through a long tool service life. By using a servo feed system, a high cutting performance is achieved when sawing tool and stainless steels and materials such as Hastelloy or Inconel with difficult machining properties. A highly efficient chip brush system cleans the saw blade on both sides from any adhering sawing chips.
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
BEHRINGER vertical bandsaws are the perfect answer when it comes producing cuts in all plate dimensions and thicknesses with optimized contours and machining allowances. LPS bandsaws can be ideally tailored to meet your specific needs. The material table is structured using platform technology and can be variably equipped in 250 mm graduations with cover plates, liftable roller conveyor segments, recesses for crane loading on chains or measurement and clamping devices. Every machine is unique to its owner. The LPS vertical bandsaws are able to cut even materials with different machining properties with the utmost precision without compromising on speed. This is made possible by a durable design in combination with vibration-damping grey cast iron components. Saw feed is performed here by a ball screw with servo drive and the sensitive BEHRINGER cutting pressure control system.
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
The longitudinal plate saw LPS-T from BEHRINGER is a true specialist in its field. It is particularly suited for sawing small, compact parts and short offcuts of the kind required in toolmaking shops. The LPS-T also makes fast, neat work of test cuts and notching operations in materials with difficult machining properties. Making all this possible is a traversable table which allows the rapid positioning, alignment and clamping of workpieces. The material table is fitted with T-slots over its entire length, allowing even awkwardly shaped workpieces to be securely held in place by the flexible use of clamping fixtures. The LPS-T is able to cut even materials with different machining properties with the utmost precision without compromising on speed. This is made possible by a durable design in combination with vibration-damping grey cast iron components. Saw feed is performed here by a ball screw with servo drive and the sensitive BEHRINGER cutting pressure control system.
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
The new HBE Performance Series offers high performance, with ease of use and efficiency. An increase in performance while reducing power consumption, combined with a small footprint, increased health and safety aspects and still provide easy handling were just some of the demands within its development. The HBE Performance series brings many features, which make your production even more profitable: — A solid and durable design made of vibration dampening grey cast iron — Outstanding cutting performance by Servo-Downfeed system with Auto-Feed-Control — Excellent blade life due to the sensitive BEHRINGER downfeed control system, inclined band wheels and effective chip disposal — Easy operation by intuitive NC control system Different models based on cutting range ( 90° flat / 90° round): — HBE560A Performance: 560 x 560 mm / 560 mm — HBE663A Performance: 710 x 660 mm / 660 mm — HBE860A Performance: 860 x 860 mm / 860 mm — HBE1060A Performance: 1.060 x 1.060 mm / 1.060 mm
Request for a quoteResults for
Gray iron - Import exportNumber of results
24 ProductsCompany type