Cutting inserts - Import export

The new EWS tcJet range Optimal chip transport thanks to EWS tcJet EWS tcJet transports the coolant through the inset directly to the cutter and guarantees optimal chip transport... At the same time, the cutting edges have a significantly longer service life. EWS's interior cooling version is available for normal and high-pressure applications for various tool holder fixtures and cutting insert manufacturers.

TYP C 034/Mil Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height. In the device can be adjusted via adjustment screws C 034/Mil both cutting length and height and the components are then processed. The setting is displayed on the relevant scale of the device. The component is manually inserted between the tools. Those are actuated by a pneumatic foot switch. The changeover for different cutting and grid dimensions happens in less than a minute. Components

TYP C 034/S Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height. In the device C 034/S can be set via adjustment screws both cutting length and height and the components are then processed. The setting is displayed on the relevant scale of the device. The component is manually inserted between the tools. Those are actuated by a pneumatic foot switch. The changeover for different cutting and grid dimensions happens in less than a minute. Components

TYP C 043/B Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height and - if necessary - marked. This axial taped components are processed in high- components. The machine type C 043 / B can be adjusted using the adjustment spindles cutting length and the embossing position. The setting is displayed on the relevant scale of the device. Optionally can be monitored through a digital display setting. The embossing tool is specifically for connecting pins and is manufactured according to customer requirement. The machine can be upgraded for the various tools. The taped components are fed into the machine and processed automatically. The transport speed is infinitely variable. The tool change for other forms of bending takes about 5 minutes. Components

TYP C 043/BS Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height and - are marked - if necessary. This axial taped components are processed in high- components. The machine type C 043/BS can be adjusted using the adjustment spindles cutting length and the embossing position. The setting is displayed on the relevant scale of the device. Optionally can be monitored through a digital display setting. The embossing tool is specifically for connecting pins and is manufactured according to customer requirement. The machine can be upgraded for the various tools. The taped components are fed into the machine and processed automatically. The transport speed is infinitely variable. The tool change for other forms of bending takes about 5 minutes. Components

The FS 5 is a sturdy and extremely cost-effective chamfering machine with cutter head and cutting inserts. Straight edges of cube-shaped workpieces can be easily chamfered. It is designed for deburring and chamfering small workpieces starting with a thickness of 3 mm. The sturdy casing, the sanded guide rails and the integrated swarf boxes convince in every regard. The V-prism is foldable for changing the reversible cemented carbide inserts. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering. The chamfer setting is made through a knurled handwheel. A chamfer width of up to 5 mm is possible in NE metals and a chamfer width of up to 3mm in steel. The machine has a switch-on duration of 10 - 30%/h.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 5 mm thickness. The hardened and sanded guide rails must be turned for smaller and thinner workpieces starting with a thickness of 2 mm. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clean and constant chamfering. A chamfer width of up to 12 mm is possible in NE metals and a chamfer width of up to 10mm in steel. The cutting edge length of the cutting inserts can be used 100% thanks to the innovative axially adjustable motor shaft. The ASO 650-WSL has speed regulation that is very useful when processing aluminum or stainless steel and a gradual angle adjustment in a range from 15-45°. A radius processing from R1.2 to R6 is possible with different cutting inserts. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools.

The KKF3-SL, a universal chamfering and contour milling machine, has a measuring head attachment. Tools with a shaft diameter from Ø6-12 mm can be clamped in the milling cutter support. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with optional guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can optionally be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 6mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle.

The KKF4-SL, a universal chamfering and contour milling machine, has an ER collet chuck. Tools with a shaft diameter from Ø6-12 mm can be clamped. Our versatile tool range includes different VHM milling cutters and blade heads. The VHM milling cutters are available for the processing of chamfer angles and radii. Ball bearings with Ø6 or Ø8mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers. The use of cutter heads with cutting inserts and guide ball bearings starting at Ø10mm permit maximum efficiency. A guide prism with VHM shaft chamfering can be used for straight edges. The exact chamfer setting is performed through a micrometer screw. A chamfer width of up to 4mm at 45° is possible in steel. In NE metals, significantly larger chamfers are possible depending on the tool and angle. The KKF4-SL has speed regulation that is very useful for the processing of aluminum or stainless steel.

The sturdy chamfering machines are designed for chamfering, edge chamfering and welding seam preparation. The machines can process sheet thicknesses from 2-190mm. The machines generate a very good chamfering quality thanks to the optimized interaction between the cutter head, cutting inserts and minimal quantities of lubrication. In NE metals and steel, a chamfer width up to 30mm is possible. The MMB machines have gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can be set gradually in the range of 30° depending on the machine type and design, for example, 25-55°, 30°-60° or 35-65°. The MMB series is equipped with a feed unit by default. The machines can be extended with roller guide ways or converted into automatic chamfering machines. Depending on the design, the machine table is equipped with ball or heavy-duty rollers.

The sturdy and easy-to-use chamfering machine was designed for the deburring and chamfering of small to medium-sized workpieces and bar material starting with a thickness of 1 mm. The machine generates a very good chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts. In NE metals and steel, a chamfer width up to 11mm is possible. The WKF 170 has gradual speed regulation, which is very useful when processing aluminum or stainless steel. The angle adjustment can cover a range from 15-60° in 5° steps. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box. The machine can be extended with roller guide ways or converted into an automatic chamfering machine.

The SMA 60 is available in an electrical, compressed-air or high-frequency design. The machine is designed for handling steel, aluminum, copper and plastics. In NE metals and steel up with a tensile strength of 600N/mm², a chamfer width of up to 30mm is possible. In addition to this, a radius processing of 1.2mm to 15mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°. The processing of drill holes is already possible starting at a diameter of >28mm. Advantages: Booster technology for a higher material removal rate Spring technology for higher service life of cutting inserts Processing chamfers, radii on sheets, containers, inner and outer edges, contours and drill holes Replaceable cutter head for different chamfer angles 0 - 80° Easy and vibration-free work

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 1 mm thickness. The machine generates a perfect chamfering quality thanks to the optimized interaction between the cutter head and cutting inserts - like sanded. In NE metals and steel, a chamfer width up to 10mm is possible. The ASO160-M is ideal for processing steel and aluminum. The ASO 160-MSL design has speed regulation that is very useful for the processing of aluminum or stainless steel. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop, which simultaneously serves as a chip box.

The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 2 mm thickness. The sturdy cast iron casing, the hardened and sanded guide rails, the speed regulation and the integrated chip box convince in every regard. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering. A chamfer width of up to 10 mm is possible in NE metals and a chamfer width of up to 5mm in steel. Hardened workpieces, HSS and hard metal materials can be processed through optional CBN and diamond grinding discs. For longer workpieces or serial part production, we recommend optimizing the feed unit with pressing pressure, surface quality, feed speed and service life of tools. The machine can be installed on an undercarriage for flexible use in a workshop.