Results for
FLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FXL-CT table-top units are built for a maximum of 2 channels without preselection. They can be used to control magnetic chucks up to a total area of approx. 1.2m2. can be controlled. FXL-CT is designed as a table-top unit or to be attached to the machine wall by means of the magnetic feet on the back. The operation is carried out directly on the device.
Request for a quoteUNITED PROCESS CONTROLS GMBH
Germany
Protherm controllers are universal configurable programmers that monitor, control and record processes running in a single furnace or simultaneously in multiple chambers. They are configurable for various types of batch and continuous furnaces. Installations are done on new or refurbished furnaces and are used for updating existing systems. FEATURES • Up to 32 PID control-loops to regulate parameters such as temperature, furnace pressure, atmosphere parameters (e.g.: carbon potential, nitriding potential and oxygen potential) • Real-time monitoring of jobs at all stages • Process parameters configured with alarm limits • Online diffusion calculation to control the process using required target values (e.g.: case depth, surface carbon content) • Up to 999 treatments/templates can be created and modified • Integration with SCADA systems • For all types of processes: nitriding, nitrocarburizing, carburizing, carbonitriding, plasma and vacuum • For compliance with CQI-9, AMS 2750 &..
Request for a quoteASSFALG GMBH
Germany
The electronic reverse polarity controllers are used to turn the magnetic clamping plates on and off and to regulate the holding force in several stages through the affiliated manual operating device. With the D50 controllers, up to 100 poles with the pole size 50x50mm or 50 poles with the pole size 75x75mm can be switched. Furthermore, the D100 controller is needed. The single-channel devices D50 and D100 are used to control Magnaslot and Doublemag. The D50-2 controller is needed to operate the Triplemag magnet modules with additional holding surface. If multiple magnetic clamping plates are controlled individually, the D100-4 controller must be used. Up to 4 clamping plates can be switched separately here. Individual requests can be implemented upon customer request.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
We are happy to support you by taking on tasks related to the control and coordination of e.g.: Cross-divisional project management Cross-plant project coordination supplier control Vorseriensteuerung Prototypes and test construction Series start-up control component coordination parts management
Request for a quoteSCHÜTZ GMBH MESSTECHNIK
Germany
The new Scout VGS 4500 measuring station consists of measuring probes mounted on the front of the vehicle and a measuring cell installed within the vehicle. These two parts are connected via a suction hose. The system can be mounted on different type of vehicles such as a pickup truck, quad or car. To adapt to nature of the surface to be measured, the probe distance can be adjusted quickly and it is just as easy to store the entire front probe. With the Scout VGS 4500 measuring station from Schütz, very large sections of network can be inspected and the results can be recorded in a short time. With the vehicle-based measuring system, measurements are accurately taken at speeds up to 50 km/h. Even under the most difficult conditions, Scout VGS 4500 has proven its reliability. The system was successfully subjected to a resistance test in the desert at an outside temperature of over 36 degrees Celsius.
Request for a quoteSIKO GMBH
Germany
Reach for the stars! The innovative adjusting knob DKE01 combines a programmable electronic position indicator with a star grip or disk handwheel to offer a flexibly usable positioning unit. The indicated values can be configured application-specifically to cover the most varied areas of use with always the same basic device. Turning knob with integrated 5-digit LCD display. Digit height approx. 11,5 mm. Freely programmable via the ProToolDE programming software. Usable for length or angle measurement. Shaft accommodation: max. Ø 20 mm. Long battery life. With disk handwheel as an option.
Request for a quoteBÜRKLE GMBH
Germany
The drill head for carcass sampling has a hexagonal socket for bit holders or chucks, suitable for all commonly used cordless screwdrivers or drilling machines. Meat sampler for microbiological sampling of carcass surfaces. Slaughtering businesses (slaughterhouses, butcher's shops, etc.) are obligated as part of operational process control and for monitoring of slaughter hygiene to conduct regular microbiological examinations of carcasses for cattle, hogs, sheep, goats and horses, etc. The samplers for carcass sampling are similar to a cork drill. They can be used in the punch process (a destructive process, also called the cork drill or excision process) to remove a circular sample of tissue of 5 cm² from the surface. After the punch sample is cut out, it is removed from the carcass with a scalpel and tweezers.
Request for a quoteFÖHRENBACH GMBH
Germany
The versatile control unit for handling, assembly technology, linear robots The unipos 330 is a universal, modular CNC continuous path control for up to 3 axes (interpolating) in connection with a PLC for controlling most reliable applications for machine construction automation technology, machine tools and special applications. Depending on the design, either stepper motors or servomotors are used as axis drives. The integrated panel PC with the LINUX operating system allows convenient programming of your application and the user interface (HMI). Features Interpolating continuous path control for a maximum of 3 servo axes CNC programming using G code 1 to 3 axes / stepper motors or servomotors Processor: 32-bit microcontroller, 400 MHz, without fan 7" touch screen, resolution: 800 x 480 DPI, TFT colour
Request for a quoteBÜRKLE GMBH
Germany
The scratcher is a special sampler for powders and granules that do not flow freely. The sample is transferred to the closable inner tube using a scraper. Sliding PTFE separators are used to divide the inner tube into different zones. The separators also prevent the sample from being mixed.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic detection principle. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
RESISTOMAT® model 2408 megohmmeter has been especially developed to measure extremely high resistance values with a high degree of accuracy. This instrument has a specifi cation that makes it suitable for all common applications. The measurement voltages equal those given in the DIN test regulations (e.g. DIN 51953, DIN 53482, DIN 54345, DIN 57281 and DIN 57411) for measuring the electrical resistance value across fi lms, fl oor coverings, test equipment, cables, moldable materials, rubber, plastics, insulating oils and the like. Features: — Resistance range from 1 kΩ ... 100 TΩ — Current range from 0.1 pA ... 1 mA — Autorange — Test voltage selectable from 1 V ... 1000 V — Limit indicator — Measurement results storable on external USB flash drive — RS232 interface (USB and Ethernet optional)
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
The BH25 is a high resolution exposed linear encoder with interferometric measurement signal generation. The BH25 scale has a graduation period of 1µm. The interferometric laser scale principle generates a sinusoidal measurement signal with a signal period of 250nm in the read head. The BH25 is characterized by its small size and high signal quality. It is suitable for resolutions of up to 3.8pm. Due to the reflective scanning and the small design it is perfectly suited for high accuracy X/Y stages with linear motor drive as well as for measurement applications
Request for a quoteBÜRKLE GMBH
Germany
The sample containers sterile are sterilised by irradiation and correspond to a sterility assurance level Sterile SAL 10-3 (according to ISO 11137) inside. The handy and universally applicable sample jar is easy to fill, smooth-walled and free of undercuts, therefore it can be emptied completely. It is an excellent universal container for all liquid and solid contents. The attached lid of the sample container can be opened with one hand and fixed at a 90° angle. This leaves the other hand free to take samples. Liquid/condensate in the lid runs into a collecting channel integrated in the lid, nothing is lost, nothing can drip off. The sample boxes are closed while hot during production. Due to this process, the sample boxes close absolutely tightly, as the lid and box adapt optimally during the cooling process. The sample container made of PP is highly transparent, the contents of the container can be easily recognised.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High precision magnetic absolute linear encoder for CNC machine tools in robust design Measuring lengths:140mm - 3.640mm Accuracy: 3+3ML/1.000 µm(p-p) or 5+5ML/1.000µm(p-p) Max. Resolution: 10nm Max. Response speed: 200m/min Extremely robust against vibration and shock Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron machine bed Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DriveCliQ version is Functional Safety certified
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High-precision absolute angle encoder with flat design with integral bearing Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables Serial interfaces for Siemens and Fanuc. Siemens version with Functional Safety certification.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Highly accurate absolute angle measuring system with flat design and integrated bearing. Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables. With serial interfaces for Fanuc, Mitsubishi and Yaskawa CNC available.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BÜRKLE GMBH
Germany
Sterilisable pendulum beaker made of stainless steel V2A (1.4301) for industry and water treatment. Beaker with scraping edge, capacity 1000 ml. Ideal for powders, granulates, pastes and slurries. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
In measurement and control technology digital indicators are used to constitute measured values or process variables.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
In measurement and control technology digital indicators are used to constitute measured values or process variables.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
In measurement and control technology digital indicators are used to constitute measured values or process variables.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
In measurement and control technology digital indicators are used to constitute measured values or process variables.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
In measurement and control technology digital indicators are used to constitute measured values or process variables.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
In measurement and control technology digital indicators are used to constitute measured values or process variables.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
Universal PID temperature controller with two separate programmable control outputs for applications with simultaneously active cooling and heating cycles. With auto tune, 5 alarm functions and ramp and soak program (up to 180 time segments).
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
In automation engineering, digital Controllers are used to set and stabilize the variable processes for the users pre-defined values
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
The N480D-RRR is an efficient PID-temperature controller with an excellent price-performance ratio.
Request for a quoteB + B THERMO-TECHNIK GMBH
Germany
The waterproof HACCP-Thermometer with Pt1000-Penetration Temperature probe is the appropriate instrument for measuring temperature or process controls for the food industry, laboratories and production processes.
Request for a quoteResults for
Controller - Import exportNumber of results
254 ProductsCompany type
Category