Results for
HAACON HEBETECHNIK GMBH
Germany
Lifting device for lifting, levelling and depositing of ISO containers Lowering of containers from a truck up to 1.750 mm height foldable level arms for easy shipment Infinitely adjustable to container height
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Roller set for moving of ISO containers Steering rod for easy manoevring of dismantled roll and for steering Including brake Set consisting of towing bar, four steering wheels, locking in driving direction Rolling up to 6 km/h
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Container rollers with load upstroke for lifting and moving of ISO containers Set of rollers consisting of drawbar and four corner units Rolling up to 6 km/h
Request for a quoteASSFALG GMBH
Germany
The electropermanent load lifting magnet traverses TBK4 and TBK6 with automatic telescopic arm allow the lifting and transportation of sheets in different sizes from 3m to 16m. The patented solid steel modules are more heat-resistant than comparable modules made with a plastic casting mass. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the magnet traverses from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 5 mm. Magnet modules that are not needed can be switched off with the multi-channel control. This means a large magnet traverse system can be securely used for the transportation of smaller sheets.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
Incremental rotation sensors are used wherever displacement, positions or speeds have to be measured accurately. They are therefore important interfaces between the mechanical and electronic parts of a machine. Mechanically robust, electrically reliable and resistant to extreme ambient conditions; these are the outstanding properties offered by this sensor. Typical applications include —Machine tools —Wood and plastic machining —Textile machines —Lifts —Door systems —Paper machines —Drive equipment —Assembly and handling equipment —Packaging machines —Scales —Test machines —Conveying equipment —Doors and gates Specific characteristics —Degree of protection IP65, all-around —Robust —High resistance to interference —Rotary speed sensor: 60 pulses/turn (standard) —Angular displacement sensor: up to 3600 pulses/turn —Detection of rotation direction (channels A and B) —Reference pulse (channel N) —Special versions on request
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
FXE-M electro-permanent load lifting magnet modules can be combined with MCF control units to form modular load lifting systems. For example, a single FXE-M module with an MCF 1-channel control unit can be used on the crane of a flame-cutting machine, or 4 FXE-M modules, controlled together or individually by an MCF 4-channel control unit, can operate in a fully automatic sectional steel plant. In use on cranes, manipulators, conveyors and robots, FXE-M modules have proven themselves thousands of times over. FXE-M modules are manufactured using monoblock technology and are extremely stable. As with the other products in the FXE series, a choice can be made between different pole types in order to use the appropriate magnet module depending on the load, dimensions and surface.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
The HGF Handgausmeter is an easy to use precision instrument. The superfine 1mm probe magnetic flux densities can be measured extremely close to the magnetic pole and in very narrow air gaps. The HGF can be switched between AC and DC magnetic fields as well as between units Gaus and Tesla. At the edge of the display the pending polarity N/S is in the mode "DC magnetic fields" constantly displayed, the "peak indicator" facilitates the search for magnetic surfaces for example, in tracking down unwanted residual magnetism. The package includes in addition to the meter, the 1mm transversal probe and the batteries and a protective case and a protective cap for the probe. Thus, HGF is also suitable for use in the service industry. Our technicians use it for testing of heavy lifting magnets and clamping systems.
Request for a quoteFLAIG MAGNETSYSTEME GMBH & CO.KG
Germany
The FX-HV Horizontal-Vertical System will meet with its diverse setting almost any need. Overall height and focus can be adjusted by plug pins. Likewise, the device also can be used for up to 20% of its rated load without engaging under pads.The support pins are positioned in a way so that standing blanks can be struck, which, for example, is often required on the saw. Likewise lying discs and sheets can be placed. For horizontal transport, the system has a lifting eye on the back. The steel structure is completely coated, and the stable FX Lifting magnet ensures maximum safety. Special dimensions are available on request.
Request for a quoteAERO-LIFT VAKUUMTECHNIK GMBH
Germany
The -BASIC-LIFT- vacuum lifting device is designed exclusively for lifting and transporting airtight, flat and clean materials. Without battery or inconvenient power cables and thus purely mechanical, it is absolutely independent. But yet this type can lift loads of 1,200 kg and above. Functionality and characteristics The tried and tested modular AERO-LIFT system can be flexibly adapted to the job to be done and also used for very low loads. To ensure a long service life, all suction plates and sealing lips are made of high-duty perbunan. Its saftey is additionally guaranteed by vacuum gauge and a battery-operated warning device (the only electrical components of the lifter) and meets the requirement of the EU norm EN 13155. Handling is extremely easy. Every time the lifter is put down it automatically switches from „Suction“ to...
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Car body jack 1224Car body jack, (VBG 14), with adjustable claw, top load 8 t, claw 5 t, lift 500 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Specialised lifting systems for mobile devices Depending on the application of the supports, the following technical parameters can be achieved: Container carrying capacity from 2.5 t to 20 t, Lifting heights from 500 mm to 1,750 mm (Optional maximum: 2,000 mm), Attachment to ISO corners and Position Control. Innovative inclinometer-based position control is a special characteristic of our lifting systems and allows lifting and lowering action parallel to the ground during loading operations in uneven terrain, automatic initial inclination registration, inclination offset to zero degrees, control precision: +/- 0.2 degrees, safety shutdown when the inclination exceeds 3.5 degrees (or more, if required). Individual support control unit available as optional attachment.
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Specialised lifting systems for mobile devices Depending on the application of the supports, the following technical parameters can be achieved: Container carrying capacity from 2.5 t to 20 t, Lifting heights from 500 mm to 1,750 mm (Optional maximum: 2,000 mm), Attachment to ISO corners and Position Control. Innovative inclinometer-based position control is a special characteristic of our lifting systems and allows lifting and lowering action parallel to the ground during loading operations in uneven terrain, automatic initial inclination registration, inclination offset to zero degrees, control precision: +/- 0.2 degrees, safety shutdown when the inclination exceeds 3.5 degrees (or more, if required). Individual support control unit available as optional attachment.
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Swivel jib crane 4551.035Swivel jib crane, galvanized or stainless, admissible load max. 350 kg, regulating capacity: 1400 - 2000 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Swivel jib crane made of aluminium alloySwivel jib crane made of aluminium alloy, admissible load max. 160 kg, regulating capacity: 600 - 1000 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
wivel jib crane 4551.015Swivel jib crane, galvanized, admissible load max. 175 kg, regulating capacity 275- 775 mm haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.
Request for a quoteHAACON HEBETECHNIK GMBH
Germany
Specialised lifting systems for mobile devices Depending on the application of the supports, the following technical parameters can be achieved: Container carrying capacity from 2.5 t to 20 t, Lifting heights from 500 mm to 1,750 mm (Optional maximum: 2,000 mm), Attachment to ISO corners and Position Control. Innovative inclinometer-based position control is a special characteristic of our lifting systems and allows lifting and lowering action parallel to the ground during loading operations in uneven terrain, automatic initial inclination registration, inclination offset to zero degrees, control precision: +/- 0.2 degrees, safety shutdown when the inclination exceeds 3.5 degrees (or more, if required). Individual support control unit available as optional attachment.
Request for a quoteSERVOLIFT GMBH
Germany
The broad applications spectrum of SERVOLIFT milling and sieving equipment leads to flexible and user-friendly solutions in combination with handling systems. The areas of application stretch from controlled sieving in order to remove contamination from raw materials to fractionation, calibration to deagglomeration. Sieve mills, vibration sieve machines or inline sieve equipment in combination with mobile or stationary lifting systems provide a flexible, compact and easy-to-clean system. Size as needed Technical description Stainless steel or cGMP/FDA compliant designs Use as sieve mills (cone mills), hammer mills, oscillating sieve mills Various throughput depending upon the product and particle size Lifting height can be customized Broad control designs, from simple microcontrollers with digital displays to PLC controls Explosion-protected designs in adherence to Atex Zone 1/21 and 2/22.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SERVOLIFT GMBH
Germany
Storage, production and operating levels are often linked in a vertical fashion for smooth material flow. A SERVOLIFTt platform lifter is a sensible solution to an elevator. Space-saving, and able to execute the platform with various accesses helps to solve space problems in material flow. A closed hoistway is not needed. Platform lifters for simple material or passengers transport, mobile or stationary. Technical description Access to the platform in the lower floor: Additional ramps Ramp to the carrying arm Trench under the carrying arm for even loading Platform with even surfaces as a transport footprint including a railing with a single door Column behind the access point Column lateral to the access point 2 access points Application: Installation in hoistway (as a material elevator) Lifting containers (such as drums, bags) to feed a system Lifting liquid containers for gravimetric emptying
Request for a quoteFRANZ EISELE & SÖHNE GMBH & CO KG
Germany
Key data: Sewage Pumps VAG, rubber mounted with mixing nozzle Suitable as waste water lifting system For pit depths up to approx. 4 m Three-phased motor 2.2-3 kW with switch and 16 A CEE device plug Outputs up to max. 1,000 l/min. The Eisele VAG vertical waste water and slurry pump with mixer cap is characterised by its robustness, that is maintenance-free and its operational safety. Can be used in cellar, collection and sedimentation chambers, in combination with a float switch it protects against flooding and has an output up to 1,000 l/min.
Request for a quoteResults for
Lift system - Import exportNumber of results
21 ProductsCompany type